Care products

Riepu kopšanas līdzeklis K2 BOLD

Tire cleaner K2 BOLDr, 5 l – gives tires a deep shine and restores their original appearance.

Stock: 0 pcs.

Lukturu stiklu pulēšanas komplekts

Set for polishing and restoring car headlights.
The set is designed to restore heavily faded, yellowed headlights to their original shine and to improve the quality of headlight illumination.
The set includes:
- sandpaper, grain size P800: 2 pcs.
- sandpaper, grain size P1200: 2 pcs.
- sandpaper, grain size P2000: 2 pcs.
- 2 sponges: 1 white and 1 orange.
- polishing paste: 1 tube x 85 g.
- UV protective liquid: 2 x 3 ml.
- masking tape (300 * 2 cm): 1 pc.
- holder: 1 pc.
- adapter with M10 thread: 1 pc.
Electric polishing machine is not included.

Stock: > 1 pcs.

SONAX sūklis

SONAX Multi sponge - double-sided.
Designed for cleaning the entire car, it's extremely absorbent and features two distinct surfaces. The gray side has a softer texture and is designed for general car cleaning. The white side has a rougher surface and is ideal for removing stubborn dirt (such as insects).

Stock: > 1 pcs.

Dzinēja iedarbināšanas līdzeklis

K2 “SAMOSTART” – an effective tool for starting the engine - works in any weather, even down to -54 ° C. Tested in the Siberian climate. Contains special additives that protect the engine during critical starting. Recommended for all types of engines.
USAGE:
1. Shake well before use.
2. Spray directly into the carburetor or intake manifold with short strokes for a few seconds.
3. Then start the engine as soon as possible.
4. In diesel engines with glow plugs, do not wait until they warm up.

Stock: > 1 pcs.

Šķidrais vaska balzams

K2 Liquid Wax-Balsam 700 ml.
K2 Balsam is a fast-acting and easy-to-use liquid wax for car paint care. It polishes and restores natural color and shine. It protects the surface from the harmful effects of weather conditions, helping the paint retain its attractive appearance longer. K2 Balm is suitable for all types of paint, but is especially recommended for matte acrylic paints.
Directions for use:
1. Shake before use.
2. Apply to a pre-washed, dry, and cooled car body with a microfiber cloth or directly to the car.
3. Buff to a shine.

Stock: > 1 pcs.

Kamīnu un grilu tīrītājs ERLA HOME

Fireplace and grill cleaner ERLA HOME, 750 ml.
A powerful and effective cleaner for glass, fireplace inserts, and grates.
Effectively removes even the most stubborn stains from glass and fireplace grates without the need for vigorous scrubbing – including burnt-on food residue, greasy deposits, soot, and smoke stains.
The active foam thoroughly envelops the dirty surface, absorbing and dissolving dirt, making it easy to remove without vigorous scrubbing.
This odorless cleaner is safe for the surfaces being cleaned – it won't scratch or damage them, and it leaves no unpleasant chemical odor.
Easy to use – the convenient sprayer ensures precise application, and the foam stays in place, working precisely where it's needed.
Instructions for use:
Spray onto a cool surface and let it sit for 1-2 minutes. Wipe with a damp cloth or paper towel, rinse with water, and dry. Repeat if necessary. Surfaces that come into contact with food should be thoroughly rinsed with water after cleaning.
Important:
Before first use, test the product on a small, inconspicuous area.
Wear protective gloves.
Do not use on hot surfaces, aluminum, copper, painted or varnished items.

Stock: > 1 pcs.

Suņu un kaķu atbaidīšanas aerosols

Dogs and cats spray repellent
Kunagone for dogs and cats is a new deterrent - with which you can effectively protect the wheels of your car from animals.
Effective protection against animals
Kunagone is a natural repellent that is perfect for protecting your car wheels from unwanted dogs and cats. If your car is a target for tagging or biting animals, this product could be the perfect solution.
Natural and Safe Composition
Kunagone preparation is 100% natural and does not harm animals. Its main ingredient is natural chilli peppers pressed in a water emulsion. These are the ones that cause the pungent smell and aftertaste, which are unbearable for dogs and cats. As a result, animals avoid marking your wheels.
Long-lasting effect
One pack of Kunagone is sufficient for approximately 250 applications. After using the product, the effect lasts for 3-4 weeks. Even in the event of rain, it is worth reapplying the repellent to maintain protection.
Technical data
Ingredients: natural chilli peppers pressed in an aqueous emulsion.
Volume: 250 ml
The active period of this product is from 3 to 4 weeks from the moment of spraying.

Stock: > 1 pcs.

Rust Converter Spray

Stock: > 1 pcs.

Bremžu tīrītājs

Easily remove dirt off your brakes with MOTIP Brake Cleaner. Brake Cleaner can be used on drum brakes, disc brakes, brake linings, calipers and brake shoes. The brake cleaner has excellent dissolving properties, leaves no residue and is non-conductive and non-corrosive. MOTIP Brake Cleaner has a powerful jet-spray and can be used in various positions.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Spray parts until contamination is completely removed.
Contaminated Power Brake Cleaner should be regarded as chemical waste.

Stock: 0 pcs.

Turbo un EGR vāŗstu tīrītājs

Dissolve deposits in EGR valves, air intake systems, manifolds and inlet valves with MOTIP EGR Cleaner. EGR cleaner restores the air supply to the engine, improves acceleration whilst reducing exhaust smoke. It is a fast-acting exhaust gas recirculation cleaner and leaves no residue. EGR Cleaner prevents resin deposits. The spray has a 360 valve.
Before use, carefully read the directions on the packaging and follow them.
For professional use only.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Follow the car manufacturer’s instructions.
Loosen the hose between the turbo and the air intake system. Start the engine and allow it to run at approximately 2000 rpm.
Spray directly into the inlet of the manifold by repeatedly, briefly pressing the nozzle until the engine runs more smoothly.
Install the hose.

Stock: > 1 pcs.

Filtra tīrišanas līdzeklis

Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
For professional use only.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Before use, allow the engine to cool down (maximum 50°C). Follow the car manufacturer’s instructions.
Remove the temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3–5 times, then allow to soak for 5 seconds.
Install the temperature or pressure sensor. Start the engine and allow it to run stationary for at least 15 minutes to evaporate most of the fluid. Perform a 30-minute test drive. This may cause steam to form.

Stock: > 1 pcs.

Dzinēja tīrišanas līdzeklis

Clean engines of vehicles and machines with MOTIP Engine Cleaner. Engine Cleaner has high dissolving properties without leaving a residue. It is also non-conductive and non-corrosive.
Usage Instructions
Disconnect the battery before use
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C. Shake the aerosol well for 2 minutes before use.
Engine cleaner contains a flammable solvent, so allow the engine to cool down.
Before treatment, cover conductive parts and switch off electrical installations.
Spray the parts to be treated evenly and allow several minutes to take effect. Treat persistent contamination with a brush. Rinse with water. The rinsing water should be regarded as chemical waste.
After cleaning, dry the conductive parts with air.

Stock: > 1 pcs.

Aizsarglīdzeklis Electro Protect

Prevent starting problems caused by moisture in electrical systems with MOTIP Electro Protect. Electro Protect is water- and moisture-repellent. It is also resistant to salt, weak acids, bases and is pH neutral. MOTIP Electro Protect offers excellent adhesion and corrosion protection.
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10 to 25°C.
Shake the aerosol well before use.
Switch off electrical installations before treatment.
The parts to be treated must be clean, dry, and free of grease.
Apply Electro Protect in several thin layers.

Stock: > 1 pcs.

Silikona aerosols

Protect and lubricate rubber parts against freezing, drying out and plastic parts from creaking and squeaking with MOTIP Silicone Spray. Silicone spray is water-repellent, pH-neutral and resistant to the weather and weak acids and bases. Silicone spray has outstanding mechanical and thermal stability. MOTIP Silicone Spray has a directed jet-spray and is resistant to temperatures of - 50ºC up to+ 200ºC.

Stock: > 1 pcs.

Ūdeni atgrūdošs sprejs

Make materials such as the upholstery of your car waterproof with MOTIP Impregnation Spray. Suitable for all types of textiles and leather from shoes to tents. Protective spray to keep material and leather dirt-free. An invisible protective film is formed, which is water-repellent and breathable. It offers lasting protection and is user-friendly.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
The surface should be clean and dry.
Apply Impregnation Spray in several thin layers with an interval of 5–10 minutes.

Stock: > 1 pcs.

Kabeļu aizsargsprejs

Prevent damage to cables and the wiring of your car by martens/small rodents with MOTIP Cable Protect. The treated surfaces take on a sticky protective film and Cable Protect can even be applied to moving parts. It has excellent adhesion, gives lasting protection, is odourless and resistant to the weather, weak acids and bases.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Apply Cable Protect in an even layer on the surface to be protected.

Stock: > 1 pcs.

Ķīļsiksnas aerosols

Protect the v-belt of your car with MOTIP V-Belt spray to remedy and prevent slipping. Also suitable for other vehicles and machines. Spray with excellent adhesion to protect V-Belts and to remedy and prevent slipping. MOTIP V-Belt spray is dilatant (increases in volume and viscosity) and user-friendly and gives lasting protection. MOTIP V-Belt Spray delays the wear, conditions V-belts and is resistant to the weather.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Switch off the engine.
Apply V-Belt Spray in an even, thin layer on the threads of the V-belt and allow to take effect.
After the solvent has evaporated, the engine can be switched on.

Stock: > 1 pcs.

Vasks slēgtiem dobumiem

For application with a UBC spray gun.

Protect the hollow areas of your car body against rust with MOTIP Hollow Section Wax. Hollow Section Wax is resistant to weather and weak acids and bases and has excellent rust protection. Hollow Section Wax has good penetration properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C.
Shake the can before use. Working pressure: 2.5–4 bar.
Apply Wax generously in the hollow areas.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

Vasks slēgtiem dobumiem

Protect hollow spaces in the bodywork of your car against rust with MOTIP Hollow Section Wax. Hollow section wax is resistant to the weather and weak acids and bases and has an excellent rust prevention. Hollow section wax has good penetrating properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature. Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Apply Wax generously in the hollow areas using the adapter.
After use, clean the valve — turn the aerosol upside down and press the nozzle for approximately 5 seconds.

Stock: > 1 pcs.

Vaska pārklājums caurspīdīgi brūns

For application with UBC spray gun.

Prevent rust on your car with MOTIP anti-corrosion wax coating. The wax coating is resistant to weather, salt, water and weak acids and bases, has excellent rust protection and can be applied in thick layers.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C. Shake the can before use. Working pressure: 4–5 bar.
Apply Wax Coating in the desired layer thickness.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.