Auto chemicals

Buferu krāsa

GREY BUFFER COLOR (AE 450ML), CONCEPT

It is a solution offered by manufacturers for restoring the color of colored plastic and vinyl surfaces. Removes stains on buffers: easily, simply and quickly removes white stains and deposits on buffers. Does not create clutter: the product has all the best properties of aerosol-shaped products - always ready to use, easy to apply, does not cause clutter and clutter, can only be used as needed and stored until the next use. Extremely flexible: also suitable for vinyl coating.
SURFACE PREPARATION: It is very important to carry out the preparation properly by carefully and thoroughly cleaning the plastic surface. Clean the surface of wax, silicones, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the aerosol can upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

Cinka pārklājums

Zinc coating (Ae 450ml)
The product is intended for professional use only.
MULTIFUNCTIONAL: Zinc Galv is suitable both as a primer and as a coating for various manufacturing, maintenance and construction industries.
FOR WELDING: The substances in the composition ensure efficient treatment of joints and joints before welding.
ANTI-RUST AGENT: Used as a coating that reduces steel and iron parts such as pipes, slabs, etc. rusting.
VERSATILE: Can be applied to acrylic or cellulose paints (do not spray on alkyd paint, as it may shrink). It can be repainted with acrylic, cellulose, epoxy and alkyd paints.
NOTE: Zinc life cycle on surfaces 9 months.
APPLICATION: Make sure that the surface to be treated is clean, dry and free from dust, oil, wax and the like. Shake the spray vigorously for another 2 minutes after you can hear the balls moving in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Allow the surface to dry for 2 hours until the coating is completely hardened before applying the paint.
AFTER USE: Invert the spray and spray to clean the spray nozzle.

Stock: 0 pcs.

Auto vasks

Original car wax, 500 ml, Turtle Wax

Easy-to-use car wax, which provides the so-called 'hard shell' effect. Wax is safe for all painted surfaces - both new and old, is a unique mixture of cleaners and waxes that removes dirt and soot, improves the appearance of your car, providing long-term protection against precipitation.

TURTLE TIPS: If the car paint has scratches and fine scratches, first use RENEW POLISH to remove them. The product will be difficult to use in direct sunlight or on hot paint. Do not use if the lacquer layer is damaged. Avoid contact with glass and trim.

USE:
1. Make sure the paint is clean and dry, shake the bottle well.
2. Treat the surface in parts, pour the wax on a clean cloth and apply it in a circular motion.
3. Allow to dry until spray forms, then wipe with a clean, soft cloth.
4. Apply a little to make the surface shiny.

Stock: 0 pcs.

Krāsa melna

SATIN MATTE BLACK COLOR (Ae 450ml), Concept
Durable, acrylic paint developed using the latest technology.
Excellent and durable coating: the ingredients in it contain a more durable coating and give a matte look. USAGE: easy to apply, quick-drying.
SURFACE PREPARATION: Lightly treat the surface with damp or dry fine sandpaper. Make sure the surface is clean and dry, free of dirt, oil, wax, etc. stains. The metal surface must be pre-treated with primer. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: 0 pcs.

Smērviela PTFE

PTFE grease - MA PROFESSIONAL - 400 ml.
Professional tool with very good lubricating properties.
The PTFE particles in its composition effectively adhere to metals, reducing friction and increasing corrosion resistance.
Resistant to salt and water.
Effective even at temperatures from -40°C to +180°C.
A special applicator ensures precise application.

Stock: > 1 pcs.

Vasks

Spray wax 750 ml
Spray wax - a fast and effective means of caring for painted surfaces of cars and motorcycles.

Stock: > 1 pcs.

Elektro kontaktu tīrītājs

K2 Contact Spray is a degreasing and protective agent for electrical parts. It is used to remove oxides, sulphides and other dirt, and has penetrating and dissolving properties. It does not conduct electricity, protects against moisture, corrosion and rust. It can be used for elements such as: plugs, contacts, connectors, wires, switches, light bulbs, fuses, etc. The use of K2 Contact restores low contact resistance and reduces voltage drops. Perfect for maintenance without disassembly. Quick-drying.

How to use:

Disconnect the electrical circuit from the power source, clean and degrease the surface. Shake the package before use (about 2 minutes). Apply generously to the element to be cleaned. Wait about 5 minutes for the product to evaporate. Grind or polish surfaces that are corroded or have other deposits. Gently remove any residue and repeat the entire procedure

Stock: > 1 pcs.

Darvas noņemšanas līdzeklis

K2 TAR REMOVER is an ideal agent for heavy dirt from asphalt and tar. Thanks to its strongly penetrating formula, you can easily clean the car body from road dirt such as tar and hard glue from road vignettes, tree sap and dust and stickers.

If you plan to carry out a full paint cleaning, K2 TAR REMOVER is one of the basic means for carrying out this procedure. Thanks to K2 TAR REMOVER, tar particles from the street will be dissolved, and you will be able to perfectly prepare painted surfaces before the polishing process, applying wax or protective coatings.

Product features:
for external use only
safe for aluminum, chrome and plastic surfaces
instantly dissolves road dirt
How to use:
Shake before use.
Apply to dirty surfaces.
Wait about 30 seconds for the dirt to dissolve, wipe with a cloth and immediately rinse thoroughly with water or proceed to washing the bodywork with shampoo.

Stock: > 1 pcs.

Darvas noņemšanas līdzeklis

Agent for removing stains and residues of tar, asphalt and other adhesive substances. Particularly recommended for use on varnish. It is completely safe for bodywork, rubber and glass elements. It does not leave any deposits or streaks.

Usage:

Spray the surface to be cleaned in small doses.
Rub the preparation with a microfiber cloth.
Wash your car with body shampoo.
Rinse the vehicle with water.
Important!

Do not use in the sun.
Do not spray on heated surfaces made of unpainted plastic or polycarbonate, e.g. headlights in some vehicles.
Protect the preparation from sunlight and temperatures above +50°C.

Stock: > 1 pcs.

Semi-synthetic oil Axenol Husq-Oil

Stock: > 1 pcs.

Darvas noņemšanas līdzeklis SONAX

Tar remover SONAX (anti-bitumen) 300 ml.
The cleaning agent SONAX cleans deep tar dirt, asphalt residue and any kind of dirt. It does not contain solvents, so it does not adversely affect the painted surface. But at the same time, it cleans even very deep and old traces of dirt from the car body.
Antibitumen will also clean oil stains, traces of resin. Ideal for cleaning the underside of the car to restore parts that have become contaminated over the years. Cleans by itself, does not require a lot of friction (no need to rub the surface).
Usage:
- Wash off dirt from the surface to be cleaned with water.
- Spray the bitumen cleaner on the surface.
- Wait a minute or two or three.
- Dry thoroughly with a microfiber cloth.

Stock: > 1 pcs.

Semi-synthetic oil Axenol Husq-Oil

Stock: > 1 pcs.

Multi-Spray Plus 7 aerosols

Multi-Spray Plus 7 aerosol, 300 ml.
A product for corrosion protection, rust removal and lubrication of various parts.
Functions:
- Removes rust.
- Good water resistance.
- Lubricates and protects various parts.
- Improves electrical control.
- Clears dirt.
- Does not contain silicone.
- Reduces friction and wear of parts.
- Protects moving parts from squeaking and jamming.
- Does not damage plastic, metal, wood and painted parts.
- Universal use: in garages, workshops, industry, as well as in service centers, etc. needs.
Application:
Spray Multi-Spray Plus 7 onto the surface to be cleaned or lubricated and allow to work. Wipe afterwards if necessary.

Stock: 0 pcs.

Bumper color

BLACK BUFFER COLOR (AE 450ML), CONCEPT

It is a solution offered by manufacturers for restoring the color of colored plastic and vinyl surfaces. Removes stains on buffers: easily, simply and quickly removes white stains and deposits on buffers. Does not create clutter: the product has all the best properties of aerosol-shaped products - always ready to use, easy to apply, does not cause clutter and clutter, can only be used as needed and stored until the next use. Extremely flexible: also suitable for vinyl coating.
SURFACE PREPARATION: It is very important to carry out the preparation properly by carefully and thoroughly cleaning the plastic surface. Clean the surface of wax, silicones, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the aerosol can upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

Īpaši noturīgs vasks

Extremely durable wax, 395 g, Turtle Wax
Reliable gloss, protection and versatility:
Wash the car and allow it to dry. Use on a clean surface, away from direct sunlight. Place a small amount of product on a damp applicator and apply evenly on the car panel. Allow it to dry, remove excess product with a soft cloth. Lightly polish to maximum shine.

NOTE: Not for use on vinyl, wood, or matte surfaces.

Stock: 0 pcs.

Metallic vasks PTFE

PTFE METALLIC WAX with Teflon, 500ml, Turtle Wax
Metallic Autovasax + PTFE provides the best results and durability using the highest technology, combined with the outstanding workmanship of Turtle Wax. The added fluoropolymer (PTFE) gives the wax excellent water repellency and durability against environmental pollution.

Tips from Turtle:
If the surface to be waxed is scratched, scratches must first be removed using a regenerating polisher. The product will be difficult to use in direct sunlight and on a heated surface. Do not use the product if the varnish layer is damaged or on glass or plastic (rough) parts.

Instructions for use: 1. Make sure the body is clean and dry, shake the bottle well.
2. Pour the liquid on a clean cloth and apply it evenly on the surface to be planted in a circular motion. 3. Allow to dry, then wipe with a clean dry cloth. 4. Lightly polish the surface to a shiny shine.

Stock: > 1 pcs.

Dziļas iedarbības smērvie

Deep and fast-acting grease greatly facilitates the disassembly of parts and other rusty joints.
Creates a long-lasting moisture-resistant film that protects against corrosion and freezing of component mechanisms.
The product has an excellent anti-electrification effect (50kW dielectric), so it is recommended to use it for the protection of car electrical systems, contact groups, windings and also other electrical devices that are operated in high humidity conditions.
The product is harmless to plastics, rubbers and varnished surfaces.
The product is transparent with a faint aroma, does not contain solvents, is ecologically clean and easy to use.

Stock: > 1 pcs.

Smērviela balta

White grease MA PROFESSIONAL - 400 ml.
Liquid lubricant with high penetration ability, after solidification acquires a paste consistency, resistant to washing and temperature.
Ensures proper lubrication of moving parts such as hinges, car seat rails and other hard-to-reach parts.
After the solvents evaporate, the lubricant becomes transparent.

Stock: > 1 pcs.

Transmisijas eļļa

Transmission oil Premium 75W-90 GL4/-GL5 LS 1 L

Stock: > 1 pcs.

Krāsa

Fast-drying black acrylic paint with a matt finish. For exterior and interior use. Suitable for painting metal, wood, plastic, paper, brick, plaster and other surfaces.

How to use:
1. Clean, degrease and dry the surface.
2. Mask adjacent elements that are not to be painted.
3. Shake vigorously before use for about 2-3 minutes to mix thoroughly.
4. Before painting, make a test in an inconspicuous place.
5. Apply 2-3 coats of varnish from a distance of 30 cm from the surface at intervals of no more than 5-10 minutes.
6. The coating is semi-dry after 30 minutes, completely dry after 2 hours and fully hardened after 24 hours.

Stock: > 1 pcs.