Rear box
Code 1500-W - MFT BackBox.
The MFT BackBox is an elegant, high-quality luggage box with unique, modern LED rear lights that can be expanded to suit your needs.
- Large capacity - Whether it's everyday shopping, skiing or golf gear for the whole family, with the BackBox you're ready for anything.
- Variable capacity optional rack - anything that needs a bit more space can fit in it, like skis up to 187cm long and more.
- The luggage box on the sides can be expanded with special inserts (code 1505-W) (not included - must be purchased separately), which allows you to carry up to 4 pairs of skis up to 187 cm long or 2 large bags with golf equipment, and with this increases the internal volume to 326 liters.
- Made of high-strength, glossy and scratch-resistant plastic.
- Inside the box there are fastening straps and loops, as well as foam inserts that provide optimal fixation of the load during the trip.
- Openable valves at the bottom of the box, which allow the accumulated water to drain on its own due to the suction effect.
- Extended folding mechanism - allows the box to be used both in classic cars and when installed on various vans, on cars such as VW Bus or Mercedes-Benz V-Class, except for cars with opening rear doors.
- The folding function provides easy access to the luggage compartment, even when the box is installed on its holder.
- The MFT BackBox is equipped with modern and durable LED rear lights made of miniature high power SMD LEDs.
- MFT BackBox is installed on a special folding base MFT Back Carrier (code 1201) (not included - purchased separately).
- Connection: 13-pin.
- Dimensions without additional side inserts: width 530 mm, length 1540/1900 mm, height 740 mm.
- Color: White (also available in black and silver).
- Load capacity: 57 kg.
- Volume: 300/326 liters.
- Can be locked.
- Net weight: 19.5 kg.
Made in Germany.
Stock:
> 1 pcs.
 |
|
|
|
|
Bagāžas kaste
Luggage box BackBox, code 15002-black.
The BackBox is an elegant, high-quality luggage box with unique, modern LED rear lights that can be expanded to suit your needs.
- Large capacity - Whether it's everyday shopping, skiing or golf gear for the whole family, with the BackBox you're ready for anything.
- Variable capacity optional rack - anything that needs a bit more space can fit in it, like skis up to 187cm long and more.
- The luggage box on the sides can be expanded with special inserts (code 15052-black (not included in the kit - must be purchased separately), which allows you to carry up to 4 pairs of skis up to 187 cm long or 2 large bags with golf equipment, and at the same time internal volume increases to 326 liters.
- Made of high-strength, glossy and scratch-resistant plastic.
- Inside the box there are fastening straps and loops that provide optimal fixation of the load during the trip.
- Openable valves at the bottom of the box, which allow the accumulated water to drain on its own due to the suction effect.
- Extended folding mechanism - allows the box to be used both in classic cars and when installed on various vans, on cars such as VW Bus or Mercedes-Benz V-class, except for cars with hinged rear doors. In order to have convenient access to the luggage/cargo area when using the BackBox on vehicles with hinged rear doors, the BackSupport accessory (code 1508) must be purchased separately.
- The folding function provides easy access to the luggage compartment, even when the box is installed on its holder.
- The BackBox is equipped with modern and durable LED rear lights made of miniature high power SMD LEDs.
- BackBox is installed on a special folding base MFT Back Carrier (code 1201) (not included - purchased separately).
- Connection: socket 13-pin.
- Dimensions without additional side inserts: width 530 mm, length 1540/1900 mm, height 740 mm.
- Color: Black (also available in white and silver).
- Load capacity: 57 kg.
- Volume: 300/326 liters.
Equipped with an anti-theft system.
- Net weight: 19.5 kg.
Made in Germany.
Stock:
> 1 pcs.
 |
|
|
|
|
Bagāžas kaste
Luggage box MFT BackBox, code 15001-silver.
The MFT BackBox is an elegant, high-quality luggage box with unique, modern LED rear lights that can be expanded to suit your needs.
- Large capacity - Whether it's everyday shopping, skiing or golf gear for the whole family, with the BackBox you're ready for anything.
- Variable capacity optional rack - anything that needs a bit more space can fit in it, like skis up to 187cm long and more.
- The luggage box on the sides can be expanded with special inserts (code 15051-silver (not included in the kit - must be purchased separately), which allows you to carry up to 4 pairs of skis up to 187 cm long or 2 large bags with golf equipment, and at the same time internal volume increases to 326 liters.
- Made of high-strength, glossy and scratch-resistant plastic.
- Inside the box there are fastening straps and loops that provide optimal fixation of the load during the trip.
- Openable valves at the bottom of the box, which allow the accumulated water to drain on its own due to the suction effect.
- Extended folding mechanism - allows the box to be used both in classic cars and when installed on various vans, on cars such as VW Bus or Mercedes-Benz V-class, except for cars with hinged rear doors. In order to have convenient access to the luggage/cargo area when using the BackBox on vehicles with hinged rear doors, the BackSupport accessory (code 1508) must be purchased separately.
- The folding function provides easy access to the luggage compartment, even when the box is installed on its holder.
- The MFT BackBox is equipped with modern and durable LED rear lights made of miniature high power SMD LEDs.
- MFT BackBox is installed on a special folding base MFT Back Carrier (code 1201) (not included - purchased separately).
- Connection: socket 13-pin.
- Dimensions without additional side inserts: width 530 mm, length 1540/1900 mm, height 740 mm.
- Color: Silver (also available in black and white).
- Load capacity: 57 kg.
- Volume: 300/326 liters.
Equipped with an anti-theft system.
- weight: 19.5 kg.
Made in Germany.
Stock:
> 1 pcs.
 |
|
|
|
|
Bagāžas kaste
Towbox V3 Transport Box is more modern and ergonomic, with full LED taillights, tilt pedal, new horizontal frame and integrated wheels to facilitate transport and move the tow box when needed.
It has adjustable ventilation grilles, making it ideal for transporting wet items such as ski suits, wetsuits, tents, waders, fishing gear, pontoon, etc.
Color: black
Capacity: 400 l.
Weight: 38 kg.
Load: 37 kg (for tow bar with vertical load up to 75 kg per ball).
Carrying capacity: 50 kg (for a towbar with a vertical load of up to 90 kg per ball).
Dimensions: 120 cm x 75.5 cm x 67.5 cm
Functions:
-new folding frame.
-built-in springs.
-LED interior lighting.
-regulated opening.
-central locking.
-Wide opening lid for easy loading.
When ordering, the available colors are white, black, orange, blue and green.
-production-Spain.
Stock:
> 1 pcs.
|
|
|
|
|
Jumta bagāžnieks Mitsubishi L200
Roof trunk B045.
Designed for Mitsubishi L200, 2015- (for pickups with a double cab).
Platform dimensions: 1200 mm x 1300 mm.
Includes B045: platform B004 and BA024 mounts.
The roof rack is a three-dimensional steel structure, powder painted in black and coated on the outside with Cracked Desert structural paint, which has a similar effect to Raptor.
Holes are provided on the sides of the boot platform for attaching LED work lights and LED panels to the front of the boot (lighting not included) or other light sources.
The platform is flat at the top and is suitable for installing tarpaulins on the roof. There are holes on the top surface for easy mounting of luggage nets and for screwing any individual fasteners.
The trunk is secured with the included mounting brackets.
Stock:
0 pcs.
|
|
|
|
|
Jumta platforma
Rival roof rack aluminum platform Amarok and Ford Ranger 2023+.
• 200 kg static and 100 kg dynamic load capacity
• Dimensions: 124 x 143 cm
• Modular design, many accessories available
• T-shaped slot in each profile
• Wind deflector plate under the front to reduce wind
noise
• Made of aluminum and stainless steel
• Lightweight, very strong and corrosion resistant design
• Black matte finish
Stock:
0 pcs.
|
|
|
|
|
Jumta platforma
Rival roof rack aluminum platform Toyota Hilux.
• 200 kg static and 100 kg dynamic load capacity
• Dimensions: 124 x 143 cm
• Modular design, many accessories available
• T-shaped slot in each profile
• Wind deflector plate under the front to reduce wind
noise
• Made of aluminum and stainless steel
• Lightweight, very strong and corrosion resistant design
• Black matte finish
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform MB Sprinter/ VW Crafter
ROOF RACK, SET |
MERCEDES - BENZ SPRINTER 07 - L2 length, H2 height
VOLKSWAGEN CRAFTER 17 - L2 length, H2 height
MERCEDES - BENZ SPRINTER 18 - L2 length, H2 height
Weight: kg 38.9
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 4410 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform Renault Master / Opel Movano
ROOF RACK, SET |RENAULT MASTER 10-, OPEL MOVANO 10 - L2 length, H2 height
Weight: kg 38.1
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3960 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform MB Sprinter/ VW Crafter
ROOF RACK, SET
MERCEDES - BENZ SPRINTER 07 - L2 wheelbase, H2 height
VOLKSWAGEN CRAFTER 17 - L2 wheelbase, H2 height
MERCEDES - BENZ SPRINTER 18 - L2 wheelbase, H2 height
Weight: kg v
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3410 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform MB Sprinter
ROOF RACK, SET |MERCEDES - BENZ SPRINTER 07 - L2 length, H1 height
Weight: kg 37.4
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3410 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform Fiat Ducato / Citroen Jumper / Pegeot Boxer
ROOF RACK, SET |
FIAT DUCATO 07 - L2 length, H2 height
CITROËN JUMPER 07 - L2 length, H2 height
PEUGEOT BOXER 07 - L2 length, H2 height
Weight: kg 40.3
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3960 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Jumta bagāžnieks VW AMAROK
Roof trunk B058.
Designed for Volkswagen Amarok, 2023- (with a double cab).
Platform dimensions: 1200 mm x 1300 mm.
Includes B058: platform B004 and BA036 mounts.
The roof rack is a three-dimensional steel structure, powder painted in black and coated on the outside with Cracked Desert structural paint, which has a similar effect to Raptor.
Holes are provided on the sides of the boot platform for attaching LED work lights and LED panels to the front of the boot (lighting not included) or other light sources.
The platform is flat at the top and is suitable for installing tarpaulins on the roof. There are holes on the top surface for easy mounting of luggage nets and for screwing any individual fasteners.
The trunk is secured with the included mounting brackets.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform Renault Master / Opel Movano
ROOF RACK, SET | RENAULT MASTER 10 -, OPEL MOVANO 10 - L2 wheelbase, H2 height
Weight: kg 30.3
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3240 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform Fiat Ducato / Citroen Jumper / Pegeot Boxer
ROOF RACK, SET |
FIAT DUCATO 07 - L2 length, H1 height, L2 wheelbase, H2 height
CITROËN JUMPER 07 - L2 length, H1 height, L2 wheelbase, H2 height
PEUGEOT BOXER 07 - L2 length, H1 height, L2 wheelbase, H2 height
Weight: kg 34.9
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3410 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform MB V-klasse / MB Vito
ROOF RACK, SET
MERCEDES - BENZ V-KLASSE & VITO 14 - 19 wheelbase L3
MERCEDES - BENZ VITO 19 - wheelbase L3
Weight: kg 29.9
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3240 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Jumta bagāžnieks universāls
Roof rack for B022 hardtop pickup truck, universal.
Designed for pickups with a hardtop cargo compartment.
Platform dimensions: 120 cm x 120 cm
Includes: platform B051 and mounts BA029.
The roof rack is a three-dimensional steel structure, powdercoated black and finished on the outside with 'Cracked Desert' structural paint, which gives a similar effect to the Raptor finish.
The roof rack in the pickup version has a special mounting lug design that easily adapts to the curvature of the hardtop and is height adjustable to match the pickup roof rack.
To stabilize the rack at the correct height and position, drill the rack support leg at the marked location and screw it in with bolts (included). Mounted on six support legs, each with two bolts.
The platform is flat on top and is adapted for setting up tents and awnings on the roof. On the top surface there are holes for easy installation of luggage nets and screwing any individual fasteners.
On the sides of the trunk platform there are mounts for LED work lights (not included).
Stock:
0 pcs.
 |
|
|
|
|
Jumta bagāžnieks universāls
Roof rack for pickups B050, universal.
Designed for pickups with a hardtop cargo compartment.
Platform dimensions: 120 cm x 120 cm
Kit: platform B051 and fasteners BA028.
The rails of the hardtop are equipped with mounting holes to allow height adjustment, such as attaching a roof rack to the cab roof.
The platform is attached to a solid surface with 12 bolts (included).
The platform is flat on top and is adapted for installation of awnings on the roof. The top surface has holes for easy installation of luggage nets and screwing of individual fasteners.
On the sides of the trunk platform there are places for attaching LED work lights (not included).
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform F.Transit Custom / Opel Vivaro / R.Traffic / Nissan NV300
ROOF RACK, SET | wheelbase L2 | H1 height
FORD TRANSIT CUSTOM 13 -
NISSAN NV300 15 -
OPEL VIVARO 14 - 19
RENAULT TRAFIC 14 -
Weight: kg 30.4
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3240 and width 1540mm.
Minimum no. (4) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
Roof rack platform MB V-klasse / MB Vito
ROOF RACK, SET |
MERCEDES - BENZ V-KLASSE & VITO 14 - 19 wheelbase L2
MERCEDES - BENZ VITO 19 - wheelbase L2
Weight: kg 28.8
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3060 and width 1540mm.
Minimum no. (5) of roof fixations included.
Stock:
0 pcs.
|
|
|
|
|
