Car rack systems

Jumta bagāžnieka platforma VW T6

ROOF RACK, SET | VOLKSWAGEN T6 15 - WB 3400mm

Weight: kg 32
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Lenght 2710 and width 1540mm.
Minimum no. (5) of roof fixations included.
-in the set of the trunk there is a wind deflector that prevents the formation of unnecessary noise when the car is moving.
-in the back of the trunk there is a special roller to facilitate loading and unloading of long items.

Stock: > 1 pcs.

Jumta bagāžnieka šķērsstieņi

Original trunk from Lexus (for Lexus RX 2009-2015 models without rails).

Stock: 0 pcs.

Jumta bagāžnieka šķērsstieņi

Original car roof rack.
Specially designed for LEXUS GS300 2012 - models without roof rails.

Stock: 0 pcs.

Jumta bagāžnieki

Crossbars (000125000000) together with fasteners (000106600000)

Chevrolet Equinox III, 2017> , screws 8x25
Citroen Jumpy (Mark 2) , 07>2016, screws 6x16
Citroen Nemo / Nemo Van, 2008> , screws 8x25
Citroen Space Tourer, 07>2016, screws 6x16
Fiat Doblo Cargo / Cargo Maxi, 00>10 , screws 6x16
Fiat Doblo II, 10>2015, screws 6x25
Fiat Doblo II, 2015> , screws 6x16
Fiat Doblo II Maxi, 2015> , screws 6x25
Fiat Fiorino II, 87>2013, screws 6x25
Fiat Fiorino III, 2007> , screws 6x25
Fiat Scudo, 94>2006, screws 6x25
Fiat Scudo II, 07>2016, screws 6x25
Ford Connect I Transit, 02>2013, screws 6x25
MB Citan (W415) , 2012> , screws 8x25
Nissa Kubistar, 03>2009, screws 8x25
Nissan Nv 200, 2009> , screws 8x25
Opel Combo (D) , 14>2018, screws 6x25
Peugeot Bipper, 2008> , screws 6x25
Peugeot Expert, 07>2016, screws 6x25
Peugeot Expert 94>2006 , screws 8x25
Peugeot Partner II, 08>2018, screws 6x25
RAM ProMasterCity, 2014> , screws 6x16
Renault Kangoo Express (Mk1) , 98>2008, screws 8x25
Renault Kangoo Express (Mk2) , 2008> , screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 10>2015, screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 2015> , screws 8x25
VW Caddy IV, 2021> , screws 8x25

Stock: 0 pcs.

Roof racks

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan

Stock: > 1 pcs.

No name

Practical element for cars front end. Designed to protect engine from low temperatures. Helps

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D2 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 120 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to imp

Stock: 0 pcs.

Jumta bagāžnieks

ORION roof rack.
Includes: 2 black crossbars, in a plastic case and ORION fasteners - 4 pcs.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack.
- Rectangular crossbars with dimensions of 33 x 22 mm are made of durable steel with a plastic cover.
- Length of crossbars: 120 cm.
- Fixing set: durable legs, correctly profiled, made of thick steel and equipped with rubber elements that protect the car's paintwork.
- Maximum load: 75 kg.
The roof rack is ideal for transporting various items, such as ladders, building materials or furniture, and it is also possible to additionally install roof boxes, bicycle and ski holders, etc.
The set includes: crossbars - 2 pcs. and fasteners - 4 pcs.

Stock: > 1 pcs.

Jumta bagāžnieks

complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams-120cm.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack.
Included: transverse – 2 pcs. and fastenings – 4 pcs.
The length of the crossbars is 107 cm.
Made of durable steel, in a plastic case, black.

Stock: > 1 pcs.

Jumta bagāžnieks

complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams.

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to imp

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D1 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 130 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.

Roof racks

Textile floor mats - made from special auto textile material. Good protection from dust and w

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D3 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 130-140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 130 cm.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel and aluminum.
Bar typ: Oval.
Security Key: Yes
Certificate: Pimot
Mounting: using tools.
The kit includes: 2 aluminum beams + 4 heels + assembly instructions.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack designed for NISSAN NAVARA D23 / NP300. It is a spatial steel structure painted black and finished on the outside of the Raptorem. On the sides of the trunk platform there are mounts for LED work lamps and mounts for LED panels in the front of the luggage compartment. The price is for the finished platform with special mounts for NISSAN NAVARA, but without the cost of lighting. The platform is flat in advance and is suitable for installing tents on the roof. On the upper plane there are holes for convenient installation of luggage racks and screwing any individual fasteners.
Platform Dimensions: 1200mm x 1300mm
B013 kit (B004 platform plus BA009 fasteners)
Powder-coated with black paint and optionally coated with Raptor for added protection against mechanical damage.

Stock: 0 pcs.