Car rack systems

Roof racks

Technical specifications-
Type of roof: factory mounting points with 6 or 8 mm thread.
Beam length (mm): 160 cm.
Beam Width (mm): 32.
Beam Height (mm): 20.
Payload * (kg): 70 (may depend on vehicle characteristics).
Material: steel.
Black color.
Beams section: rectangular.
Protection of the castle - beams: no.
Certificate: Pimot
Assembly: using tools.
The kit includes: 2 steel beams + 4 heels + assembly instructions.
One support heel of the trunk Dromader D-T, uses only one installation location in the factory hole.
Attention-
 the roof opening is usually through and requires the installation of the seal with silicone or other sealing means.
The trunk for this model can be equipped with different cross beams of the type 'O', 'AERO', 'DYNAMIC'.

Stock: > 1 pcs.

Roof racks

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Trunk crossbars Thule (1 pc. in the package)
Premium aerodynamic crossbars for an extremely quiet ride and easy attachment of accessories
-length: (cm) 104
- maximum load: 75 kg.
Please also check the maximum roof capacity of your vehicle.
Equipped with T-track: Yes

Stock: 0 pcs.

Bagāžnieka šķērsstieņi

Trunk crossbars Thule (1 pc. in the package)
Premium aerodynamic crossbars for an extremely quiet ride and easy attachment of accessories
-length: (cm) 113
- maximum load: 75 kg.
Please also check the maximum roof capacity of your vehicle.
Equipped with T-track: Yes

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack.
Includes:
- 3408 - Kit Beta 108 mounts.
- 3351 - Lapy Beta mounts .
- steel cross bars black 165 cm - 2 pcs.
Maximum load (kg) - 75.

Stock: > 1 pcs.

Slēpju turētājs uz magnēt

Magnetic ski carrier IGLOO without anti-theft device. Suitable for carrying 2 pairs of skis. Lightweight, practical, easy fixing without tools.

Stock: 0 pcs.

Ski holder for 3 pairs

Holder for skis and snowboards. Thule Deluxe aluminum aerodynamic ski holder. It is designed to carry three pairs of skis or two snowboards.
Enlarged open button
Width of cargo 30 (cm)
Fitable for rectangular and aerodynamic roof bars.
TÜV certified

Stock: 0 pcs.

Jumta bagāžnieks

Technical specifications-
Type of roof: factory mounting points with 6 or 8 mm thread.
Beam length (mm): 160 cm.
Beam Width (mm): 32.
Beam Height (mm): 20.
Payload * (kg): 70 (may depend on vehicle characteristics).
Material: steel.
Black color.
Beams section: rectangular.
Protection of the castle - beams: no.
Certificate: Pimot
Assembly: using tools.
The kit includes: 2 steel beams + 4 heels + assembly instructions.
One support heel of the trunk Dromader C15, uses only one installation location in the factory hole.
Attention-
 the roof opening is usually through and requires the installation of the seal with silicone or other sealing means.
The trunk for this model can be equipped with different cross beams of the type 'O', 'AERO', 'DYNAMIC'.

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Transverse rods on the roof

Stock: 0 pcs.

Jumta bagāžnieks

The Beta Orlando roof rack is designed for plain roof cars.
Bar length: 120 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to imp

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Transverse rods on the roof

Stock: 0 pcs.

Jumta bagāžnieks

Complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D5-160 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 160 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta šķērsstieņi

Car roof crossbars CRUZ CR 921-385
Made of galvanized steel
The design of the supports and covers is made of ABS.
Safer and more aerodynamic.
Innovative tension system built into the rods.
All types of accessories are easy to install.
If desired: a set of 4 anti-theft locks (code 932-014-15).
Included: 2 pcs.

Stock: 0 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key:
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 130 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key:
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Roof racks

BOSS AERO 1.65 - Roof bars
- Package includes: 2 aluminum rods. The kit for mounting in the BOSS is not included and should be sent separately.
- The BOSS roof bars are an aerodynamic shape that reduces air resistance and noise.
- Easy to install, complete with installation instructions, no additional tools are required.
- Roof bars seal is made of non-slip rubber. In addition, the boot is equipped with a standard T-groove.
- Load capacity 70 kg.
- Length 1,65 m.

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Roof rack crossbars with key.
- Model: Aero
- Length: 160 cm.
- Material: aluminum.
- 2 pcs/set

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: > 1 pcs.