Battery Charger

Additional information about product

EPAP11 – 3-in-1 Cordless Compressor with Jump Start and Power Bank
The EPAP11 is a multi-functional portable compressor with a built-in battery, jump starter, and power bank. Designed for drivers who need reliable tire inflation, emergency power, and electronics charging – all in one compact device.
With a maximum pressure of 150 PSI and a flow rate of 20 L/min, this compressor is ideal for inflating car, motorcycle, and bicycle tires, air mattresses, and balls. Inflation time from 0 to 2.5 bar is approximately 10–11 minutes. The device offers four preset operating modes: car, motorcycle, bicycle, and ball – making it easy to quickly set the correct pressure without the need for manual programming. The pressure scale ranges from 14.5 to 51 PSI.
The built-in 4x 2000mAh (14.8V) battery allows for wireless operation and charging of mobile devices via the USB port (5V/2.4A). The compressor can also be used as an emergency booster to jump-start a vehicle – the starting current is up to 500A. The set includes smart jumper cables with a full suite of safety features: spark protection, reverse polarity protection, overload protection, and overheating protection.
An additional feature is the built-in 5W LED light, which offers two white brightness levels and a red emergency light with a flashing function – ideal for marking roadside stops or working at night.
Key Features:
Inflates up to 150 PSI / 10 bar (20 l/min)
4 pre-set inflation modes: car, motorcycle, bicycle, ball
Pressure range: 14.5–51 PSI
Emergency vehicle start – starting current up to 500A
USB power bank (5V / 2.4A)
Built-in LED lighting: two brightness levels (white) + red flashing emergency light
Protection: overload, short circuit, overheating, and reverse polarity
Housing made of fire-resistant ABS plastic (V0 class)
Includes:
– Compressor
– 1.6 m inflation hose
– 4 interchangeable nozzles (for mattresses, balls, etc.)
– Smart jumper cables
– USB Type-C power cable
– Cigarette lighter cable (approx. 3 m)
– Fabric carry case
– Instructions
Technical Specifications:
Power Supply: Built-in 14.8V battery (4×2000mAh)
Power: 80W
Operating Current: 10A
Start Current: 500A (max.)
Maximum Pressure: 150PSI (10.3Bar)
Pressure Range: 14.5–51 PSI
Capacity: 20L/min
Inflation Time (0–2.5bar): 10–11 minutes
Inflation Modes: Auto / Moto / Bike / Ball
USB IN: 5V / 2A
USB OUT: 5V / 2.4A
Housing Material: ABS (V0 Class)
LED Light: 5W (white – 2 brightness levels, red – flashing)
Charging Time: 4.5–5 hours

Additional information
Weight:	0.4980