Instruments

Order by:
 
 
Kategorijas filtri:
Car brand
Product Code Price Number
Tool kit

Demountable tow bar with screw fixation. Standard type with detachable ball, that fixed with

Stock: 0 pcs.

JA43490

Price: 15.00 €

Portable lamp

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: > 1 pcs.

LW011

Price: 15.00 €

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 3000
Nominal load (kg) 2250
Pick up high (mm) 180
Plunger stroke (mm) 110
Screw pitch (mm) 60
Lift high (mm) 350
Package (pcs) 1
Weight: 3.75

Stock: 0 pcs.

43030

Price: 15.00 €

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 3000
Nominal load (kg) 2250
Pick up high (mm) 194
Plunger stroke (mm) 118
Screw pitch (mm) 60
Lift high (mm) 372
Package (pcs) 1
Weight: 3.75

Stock: 0 pcs.

43303

Price: 15.00 €

Skrūvgriežu komplekts

Set of insulated screwdrivers, 11 pcs.
-Adapted to work under high voltage.
-Screwdrivers made of CR-V chrome vanadium steel, a material that is highly insulating, and a hardened, magnetic tip.
Set contains:
- 6 flat screwdrivers:
2.5 x 75
3 x 100
4 x 100
5×125
6 x 100
8 x 175
- 5 Phillips screwdrivers:
PZ 0 x 75
PH 0 x 75
PH 1 x 80
PH 1 x 100
PH 2 x 100
It is packed into a special case with the handle for storage of screw-drivers and convenient carrying.

Stock: > 1 pcs.

63408

Price: 15.00 €

Sūknis degvielas pārsūknēšanai

Submersible fuel pump.
- Voltage 12V.
- Diameter 38 mm.
- Flow rate 15 l/min when powered by 12 V DC.
- Equipped with a metal mesh filter.
The pump is designed for pumping diesel fuel, heating oil and other liquids of similar density.
Thanks to its reduced diameter, it is very convenient and easy to use when pumping liquids in cars, tractors, construction machines, combine harvesters, boats, etc.
A special metal mesh filter at the pump inlet (bottom) prevents the suction of elements that could damage the device and cause contamination of the liquid.

Stock: > 1 pcs.

58028

Price: 15.00 €

Instrumentu komplekts

A set of conical and straight drills with a diameter from 3 to 32 mm.
Designed for drilling ferrous metal, aluminum, stainless steel, wood.

Stock: > 1 pcs.

AKC8143

Price: 15.00 €

Vadu stiepļu noņēmēja knaibles

Wire stripper with set of 200 electrical lugs and 60 cable ties

The wire stripper is used to strip unipolar and multipolar cables. It's delivered with electrical lugs and self-locking cable ties. There is an option of crimping electric tips of 22-10 AWG connector. The wire stripper is made of high quality hardened steel. It has a rubber handle that provides a firm grip while working. The Set includes: sleeve connectors, sliding connectors, ring connectors, spade connectors, cable ties. Technical data: 3 working modes: strip, cut, clamp, hardened steel chisel, working range: 0.2 - 6 mm, 200 electric tips, 60 self-locking cable ties (3 types of 20 pieces). What can this automatic wire stripper be used for? Cable/wire stripping, wire end stripping. Crimping insulated and non-insulated cable lugs. Cutting cables and wires. The tool is suitable for a wide range of cable types (aluminum and copper), from speaker cables to installation wires, in the range of 0.2 to 6 mm². The tool is also suitable for crimping insulated and non-insulated cable lugs in the range of 0.5 to 6 mm². The tool is indispensable for both professionals and amateur do-it-yourselfers. Thanks to the ergonomic handle with soft rubber coating, the pliers sit well in the hand and can be used comfortably. A practical limiter allows you to easily strip the wires to the same length, which allows precise work at the highest level.

Stock: > 1 pcs.

63418

Price: 15.00 €

Šļirce-aspirators

SYRINGE 04277- 500 ml-
is a professional tool for extracting or replacing fluids, including brake fluid, coolant, oil or power steering fluid.
Designed primarily for adding or sucking out operating fluids from external tanks or tanks in machines or devices.
The set includes two hoses with lengths of 190mm and 197mm with a diameter of 5/16'' and 1/4''.
The piston has a seal made of high-quality rubber resistant to long-term exposure to grease and oils.
All seals are made with the greatest precision and allow for work under high pressure.
The syringe has a venting system that equalizes the pressure under the piston, which improves its efficiency and smoothness of work.
The semi-transparent cylinder allows for an accurate check of the fluid volume and the general condition of the fluid.
Ideal for use on quads, boats, agricultural equipment, industrial gearboxes, motor vehicles, caravans etc.
SPECIFICATION:
capacity: 500ml.
colour: transparent.
equipped with a quick connector.
designed for all operating fluids.
two hoses included (possibility to connect hoses to reach hard-to-reach places).

Stock: > 1 pcs.

04277

Price: 15.00 €

Līmlenta - divpusēja

Adhesive tape 3M.
-1.2x500cm

Stock: > 1 pcs.

1/27050

Price: 14.50 €

Testeris piekabei

Trailer connection tester.
Check the electrical installation in the vehicle's 7-pin socket and trailer, connecting the tester between the car and the trailer.

The tester is simply connected to the plug / socket and by pressing the yellow button the device performs an electrical installation test. If all the LEDs in the device light up, it means that the installation is operational. A non-illuminating diode means that the cable is damaged.
Powered by a 9 V battery (not included).

Stock: 0 pcs.

0438105/1

Price: 14.00 €

Instrumentu komplekts

RT2005 - Tool kit 12 elements 1/2'

Stock: > 1 pcs.

RT2005

Price: 14.00 €

Instrumentu komplekts

Tool set.
An extensive set of precision tools- 115 elements, 98 screwdrivers and many other accessories for professional repairs.
Replaceable bits of different sizes and shapes, which can be fixed on a universal holder (included), will save space in the workshop and toolbox.
The tools, made of durable chrome vanadium steel, are resistant to corrosion, so they will serve you for many years.
The tool set is packed in a convenient case for easy storage and transportation.

Stock: > 1 pcs.

03135

Price: 14.00 €

Tool kit

Stock: > 1 pcs.

92491

Price: 13.00 €

Leg pump

Stock: 0 pcs.

21136

Price: 13.00 €

LED darba lukturis

LED headlamp LH03.
The work lamp with powerful COB LED lighting is suitable for use in professional workshops, as well as at home and camping as supplementary lighting.
Specifications:
- White color 6500K + red warning mode.
- 6 lighting modes (white and red).
- Operating temperature: -45° - 50°C.
- Service life: 100000 h.
- Material: ABS + Metal.
- Type of light: COB.
- Built-in rechargeable battery.
- Operating time with a full charge: 5 hours.
- Built-in battery charging time: 2.5-3 hours.
- Charging: micro USB cable (included).
- Overload protection.
- The case is resistant to shock, dirt and moisture.
- 2 switch buttons.

Stock: > 1 pcs.

02825

Price: 13.00 €

Sprūdatslēga ar kvadrātu

>Mechanism with 72 teeth allows to rotate by 5 degree minimum angle
>Equipped with a flag switch, a quick-reset button and a holding ball
>Made by cold stamping method
>Material - chrome-vanadium steel CrV50BV30
>It is hardened to hardness not less than 39HRC
>It is chrome plated and matt finish to resist corrosion

Stock: 0 pcs.

39482

Price: 13.00 €

Paliknis zem automašinas

Safety support - folding
- a set of 1 piece.
Intended for holding the car during repairs.
With collapsible support structure.
The support tube is equipped with holes at the required height for fixing.
Complete with locking pin.
Maximum permissible load - 2000 kg
Maximum lifting height - 277 mm
Maximum stand height - 365 mm

Stock: > 1 pcs.

43242

Price: 13.00 €

Uzgriežņu atslēga

8 in 1 multi-size wrench, equipped with rotating heads with sockets in various sizes. This tool is perfect for a variety of repair and maintenance work.

The ratchet head made of chrome-vanadium steel (CR-V) ensures strength, precision and reliability in many applications.

Dimensions: 255 mm x 45 mm
Socket sizes: 8,10, 12, 13, 14, 17, 19, 21 mm

Stock: > 1 pcs.

58001

Price: 13.00 €

Izolācijas noņemšanas knaibles

Device designed for stripping insulation from cables.

Working range of the wire stripper: 0.2 - 6.0 mm² (10 - 24 AWG)

-multifunctional, reinforced device, with rubberized handle and hardened blades

-mechanism: frontal, automatic

-in the stripping process it automatically adjusts to the cross-section of the cable being worked on

-has an additional cutter and end crimper

-stripper with adjustable stripping length

-length: 205 mm

-weight: 0.30 kg

Crimping of connector lugs:

-insulated: 0.5 - 6 mm² (22-10 AWG),

-uninsulated: 4 - 6 mm² (12-10 AWG), 1.5 - 2.5 mm² (16-14 AWG), 05 - 1mm² (22-18 AWG).

HIGH QUALITY CONSTRUCTION

AUTOMATIC AMICO INSULATION STRIPER

-The INSULATION PULLER is a practical tool for quick and precise removal of insulation from single or multicore cables. To remove the insulation, insert the wire into the jaws so that it sits flush against the tool - then squeeze the handle.

-CABLE CUTTING TOOL - another function of the wire stripper is to cut wires. The 11 mm long blade is located between the handles of the tool. To cut a cable of similar or smaller width, simply place it between the blades and squeeze firmly.

-CONNECTOR END CAPSULE - With the tool, you can crimp insulated and non-insulated connector ends onto conductors of wires with a cross-section from 1.5mm2 to 6mm2. Simply insert the conductor with the stripped end and insert it into the connector terminal, then place it in the crimping location

-PRECEPTION OF PRESSURE FORCE + LIMITER - the device has a dial which is located under the jaws. With it you can adjust the amount of pressure on the insulation, so you don't have to worry about damaging the cable while working.

Stock: > 1 pcs.

03132

Price: 13.00 €