Akumulātora lādēšanas ierīce

Description

The DBC-4A rectifier can be used to charge lead-acid (conventional and MF), Ca / Ca, AGM and gel batteries. This is a microprocessor rectifier made in accordance with the IP65 standard, which means resistance to dust and splashes, as well as splashing with a low-pressure water jet. Has guarantees from:
-short circuit.
- reverse battery connection (reverse polarity).
-open circuit.
-protection.
- recharge the battery.
- overload rectifier.
Rectifier overheating.
Has 6 charging modes:
Batteries 6 V to 14 Ah
7.2 V to 2 A
7.4 V to 2 A (charging at low temperatures)
12 V to 14 Ah batteries and deeply discharged

14.3 V to 2 A
14.7 V to 2 A (charging at low temperatures)
12V battery above 14Ah

14.3 V to 4 A
14.7 V to 4 A (charging at low temperatures)
It shows the battery voltage and charge level on an ongoing basis and adjusts the charging current depending on its needs. After charging, FULL is displayed and the battery voltage is maintained.
Specifications:
Supply voltage 230V 50 Hz
Output voltage: 6 / 12V
Power Consumption: About 60 W (Standby 1 W)
Charging voltage:
7.4 V (for 6 V batteries)
14.7 V (for 12 V batteries)
Charging Current:
2A +/- 10%,
4A +/- 10%
Supported Battery Capacity:
6V - 1.2Ah to 14Ah
12V - 1.2Ah to 14Ah and 14Ah to 120Ah
Degree of protection: IP65
6 charging programs switched by the “OPERATION MODE” button
Has a backlight display.
   Gel batteries with a capacity of up to 14 Ah, used in motorcycles and scooters, must be charged by selecting the program with the motorcycle icon on the display.
  Charging with a higher current may damage the battery.