Kartera aizsargs CITROEN JUMPER, FIAT DUCATO, PEUGEOT BOXER
Crankcase guard - under the engine, set, a copy of the original. Consists of 3 parts: - middle part (RP150721), - right side part (RP150715), - left side part (RP150716). Suitable for car models: - CITROEN JUMPER II 2018 - 2021, diesel. - FIAT DUCATO III 2018 - 2021, diesel. - PEUGEOT BOXER II 2018 - 2021, diesel. Crankcase protection effectively protects engine components from damage and extends their service life. It is made of high quality HDPE material, which guarantees high mechanical and chemical resistance, as well as to temperature changes.
Stock:
0 pcs.
|
|
|
|
|
Kartera aizsargs CITROEN JUMPER, FIAT DUCATO, PEUGEOT BOXER
Crankcase guard - under the engine, middle part. Suitable for car models: - CITROEN JUMPER II 2018 - 2021, diesel. - FIAT DUCATO III 2018 - 2021, diesel. - PEUGEOT BOXER II 2018 - 2021, diesel. Crankcase protection effectively protects engine components from damage and extends their service life. It is made of high quality HDPE material, which guarantees high mechanical and chemical resistance, as well as to temperature changes.
Stock:
0 pcs.
|
|
|
|
|
Ātrumkārbas aizsargs AUDI A4/S4/A5/S5/Q5/RS 5
Crankcase guard - under the gearbox, a copy of the original. Suitable for car models: - AUDI A4 III B8 2007-2011, petrol, diesel. - AUDI A4 III Allroad Quattro 2011-2015, universal, gasoline, diesel. - AUDI S4 III B8 2008-2011, quattro, universal, petrol diesel. - AUDI A5 I 2007 - 2011, gasoline, diesel. - AUDI S5 I 2008-2011, Coupe, Sportback, petrol. - AUDI Q5 I 2009 - 2012, Sportsback, 2.0 petrol, 2.0 diesel. - AUDI RS5 I 2010 - 2016, Coupe, Sportback, petrol.
Stock:
0 pcs.
|
|
|
|
|
Kompozītmateriāla droseļvārsta aizsargs DACIA DUSTER
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kartera aizsargs VOLVO V 40
The crankcase is new, a copy of the original. Prevents excessive wear on mechanical parts. Protects against corrosion. Installation in original places. Made of high quality PVC, ABS. Resistant to all types of working fluids and temperature extremes. Very good quality at an affordable price.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Under engine cover CITROEN BERLINGO,OPEL COMBO,PEUGEOT PARTNER,TOYOTA PROACE CITY
Skid plate for AdBlue and fuel tank, plastic, original. code 826471plastik. Suitable for car models: - Peugeot Partner, 2018-, - Citroen Berlingo, 2018-, - Opel Combo, 2018-, - Toyota Proace City, 2020-.
Stock:
> 1 pcs.
|
|
|
|
|
Kartera aizsargs VW CRAFTER
The crankcase is new, a copy of the original. Prevents excessive wear on mechanical parts. Protects against corrosion. Installation in original places. Made of high quality PVC, ABS. Resistant to all types of working fluids and temperature extremes. Very good quality at an affordable price.
Stock:
> 1 pcs.
|
|
|
|
|
Kartera aizsargs TOYOTA PRIUS
The crankcase is new, a copy of the original. Prevents excessive wear on mechanical parts. Protects against corrosion. Installation in original places. Made of high quality PVC, ABS. Resistant to all types of working fluids and temperature extremes. Very good quality at an affordable price.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kartera aizsargs TOYOTA YARIS
The crankcase is new, a copy of the original. Suitable for car model: TOYOTA YARIS, 2011-2019, diesel 1.4D-4D. Prevents excessive wear on mechanical parts. Protects against corrosion. Installation in original places. Made of high quality PVC, ABS. Resistant to all types of working fluids and temperature extremes. Very good quality at an affordable price.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kartera aizsargs TOYOTA YARIS
Skid plate under the bumper new, a copy of the original. Suitable for car model: TOYOTA YARIS, 2015-2020. Prevents excessive wear on mechanical parts. Protects against corrosion. Installation in original places. Made of high quality PVC, ABS. Resistant to all types of working fluids and temperature extremes. Very good quality at an affordable price.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kompozītmateriāla motora aizsargs SAAB 9-5
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs RENAULT TRAFIC
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs RENAULT MEGANE/TALISMAN
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs OPEL VIVARO,RENAULT TRAFIC
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs OPEL MOKKA
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kompozītmateriāla motora aizsargs OPEL CORSA (F)
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs NISSAN QASHQAI
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs NISSAN JUKE
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection MAZDA CX 5
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kompozītmateriāla motora aizsargs LEXUS GS
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|