Skid plates

Engine protection AUDI Q 7/VW TOUAREG

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET KIA SPORTAGE

Code 2.1075.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 120

Crankcase protection - for the protection of the reducer, OPA009ALU.
- Toyota Land Cruiser J120/J125, 2002-2009 (long and short base), diesel.
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, the installation is carried out in the original mounts on the car frame.
The reducer guard is only one part of the OPAK001ALU/OPAK001ALU-A kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IONIQ

Stock: 0 pcs.

Engine protection MASERATI QUATTROPORTE

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas aizsargs MET TOYOTA HIGHLANDER/ LEXUS NX 450h

Crankcase protection, code 2.1177.00 - engine protection, gearbox.
Is covered by layer of zinc, paint and varnish.
The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model).
Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment.
The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible.
All necessary fasteners are included in the kit.

Stock: 0 pcs.

Reduktora aizsargs AL 5mm MAN TGE,VW CRAFTER

Differential guard 5mm aluminium.

Stock: 0 pcs.

Engine protection VW TOUAREG

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT/TRANSIT CUSTOM

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the engine crankcase and axle.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase and axle guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 200

Crankcase protection for Toyota Land Cruiser J200, 2007- , diesel.
Designed for gearbox cover.
Material: aluminum 6 mm thick.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.
The gear cover guard is only one part of the crankcase guard set OPAK011ALU but can be used without the need to mount other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA HILUX REVO

Crankcase protection - gearbox protection, OPA068ALU.
- For TOYOTA HILUX REVO, 2015 - (for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox protection is only one part of the crankcase guard kit (OPAK017ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL JEEP WRANGLER

Crankcase protection- front/ radiator and stabilizer protection, OPA086ALU.
- JEEP WRANGLER, 2018-(for all engine versions).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The radiator and stabilizer protection is only one part of the crankcase guard kit (OPAK025ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Crankcase protection - front/engine crankcase protection, OPA058ALU.
- For MERCEDES BENZ X-CLASS, 2017-, 3.0L engine (not suitable for 2.3L engine).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK015ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL Isuzu D-Max

Engine protection.
- material aluminum-5 mm
- products are valid according to UNECE R26/R61 legislation
- comes with everything necessary for installation.
-does not fit with hydraulic steering column!
- weight 6.9 kg

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs ALFA ROMEO 159

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 150

Crankcase protection - to protect the gearbox, OPA0033ALU.
Designed for car models:
- Toyota Land Cruiser J150, 2017-, diesel.
- Toyota Land Cruiser 150, 2014-2017, diesel.
- Toyota Land Cruiser J150, 2009-2014, diesel.
Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox guard is only one part of the set (OPAK021ALU/OPAK009ALU/OPAK007ALU/OPAK007ALU-A) but can be used without the need to mount other parts.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER RAPTOR

Crankcase guard for Ford Ranger Raptor 2023-.
Designed to protect the gearbox.
Material - aluminum, 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox guard is only one part of the crankcase guard kit (OPAK026ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Crankcase protection - front/engine crankcase protection, OPA022ALU.
- For MERCEDES BENZ X-CLASS, 2017-, 2.3L engine (not suitable for 3.0L engine).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK005ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER

Textile floor mats - made from special auto textile material. Good protection from dust and

Stock: 0 pcs.