Skid plates

Engine protection SUBARU LEGACY/OUTBACK

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection VW T 4

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection OPEL MOVANO,RENAULT MASTER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs SAAB 9-5

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs HYUNDAI TUCSON IV / KIA SPORTAGE V

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD FIESTA ST

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs AUDI A 6

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine, gearbox protection MET MERCEDES BENZ M-klasse (W163)

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT 2019-

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2019-

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2019-2022

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LC250

Skid plate for tank.
Weight 10,2 kg.
Time of mounting : 30 min.

!!! First it is necessary to install 83570870 !!!

Stock: > 1 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET KIA SORENTO

Code 2.0512.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET NISSAN INTERSTAR,OPEL MOVANO,RENAULT MASTER

Code 2.0384.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine and gearbox protection MET MERCEDES BENZ A-klasse (W169)/B-klasse (W245)

Stock: 0 pcs.

Engine, gearbox and radiator protection MET VW PHAETON

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Crankcase protection, code 2.0783.00 - engine, gearbox, radiator guard.
Suitable for car models:
- CITROEN JUMPER, 2.0 Hdi, 2.2 Hdi, 2014-
- FIAT DUCATO, 2.2 Hdi, 3.0 D, 2014-
- PEUGEOT BOXER, 2014- (for cars with plastic protection).
Is covered by layer of zinc, paint and varnish.
The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model).
Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment.
The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible.
All necessary fasteners are included in the kit.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET HYUNDAI SANTA FE

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Engine, gearbox protection MET MITSUBISHI OUTLANDER

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET VW T-ROC

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.