Kompozītmateriāla motora aizsargs KIA PICANTO
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection JEEP GR CHEROKEE
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection HONDA FR-V
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection FORD TRANSIT CUSTOM
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection FORD FOCUS
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Kompozītmateriāla motora aizsargs
Stock:
0 pcs.
Sorry Image not available
|
|
|
|
|
Engine protection DACIA DUSTER
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection FIAT 500X
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection DACIA LODGY/DOKKER/SANDERO STEPWAY
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection BMW X5 (E70)
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Engine protection BMW X5 (E70)
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Kompozītmateriāla motora aizsargs AUDI Q 5
Engine protection. Made of composite material using the most modern technologies. Ensures the safety of the engine and its units for any shocks. Fully protects the engine compartment from moisture, salt, snow and dirt. Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units. Protection is attached only to the supporting elements - side members, front and rear beam.
Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements. These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.
Stock:
0 pcs.

|
|
|
|
|
Ātrumkārbas aizsargs MET SUZUKI JIMNY
Metal protection made from 2mm steel. Is covered by layer of zinc, paint and varnish. All necessary installation screws and brackets are included.
Stock:
0 pcs.
|
|
|
|
|
Ātrumkārbas aizsargs MET MITSUBISHI L 200
Crankcase protection, code 2.0979.00 - gearbox guard. For MITSUBISHI L 200), automatic gearbox 2.4TDI, 2019- Is covered by layer of zinc, paint and varnish. The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model). Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment. The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible. All necessary fasteners are included in the kit.
Stock:
0 pcs.

|
|
|
|
|
Dzinēja, reduktora un radiatora aizsargs MET MITSUBISHI L 200
Crankcase protection, code 2.0978.00 - engine,radiator, reductor guard. For MITSUBISHI L 200), 2.4TDI, 2019- Is covered by layer of zinc, paint and varnish. The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model). Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment. The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible. All necessary fasteners are included in the kit.
Stock:
0 pcs.

|
|
|
|
|
Engine, gearbox and radiator protection MET KIA RIO
Metal protection made from 2mm steel. Is covered by layer of zinc, paint and varnish. All necessary installation screws and brackets are included.
Stock:
0 pcs.
|
|
|
|
|
Engine protection MET HYUNDAI KONA
Stock:
0 pcs.
|
|
|
|
|
Engine, gearbox protection MET HONDA PILOT
Metal protection made from 2mm steel. Is covered by layer of zinc, paint and varnish. All necessary installation screws and brackets are included.
Stock:
0 pcs.
|
|
|
|
|
Dzinēja, ātrumkārbas un radiatora aizsargs MET VW TIGUAN
Metal protection made from 2mm steel. Is covered by layer of zinc, paint and varnish. All necessary installation screws and brackets are included.
Stock:
> 1 pcs.
|
|
|
|
|