Skid plates

Rear axle reductor protection MET FORD ESCAPE/KUGA

Stock: 0 pcs.

Under engine cover NISSAN PRIMASTAR/OPEL VIVARO/RENAULT TRAFIC

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs VOLVO S 60

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Under engine cover CITROEN C 5,PEUGEOT 308

Stock: 0 pcs.

Under engine cover RENAULT LAGUNA

Under engine cover
full set (middle part, left side, right side)
Fits the following: RENAULT LAGUNA 2007-2015

Stock: 0 pcs.

Kartera aizsargs TOYOTA AVENSIS, AURIS, COROLLA

Under engine cover RP151417
middle part

Stock: 0 pcs.

Kartera aizsargs MET CITROEN BERLINGO

Сode 05.0698
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kartera aizsargs MET MAZDA 3

Сode 12.1668
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Rear differential protection MET NISSAN QASHQAI/X-TRAIL

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs VOLVO S 80

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs MET BMW 7 (E65)/(E66)

Сode 03.0825
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Under engine cover AUDI A 4,SKODA SUPERB,VW PASSAT (B5)

Stock: 0 pcs.

Gearbox protection cover AUDI A 4,SKODA SUPERB,VW PASSAT (B5)

Stock: 0 pcs.

Kartera aizsargs MET TOYOTA COROLLA,PONTIAC VIBE

Сode 24.0743
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kartera aizsargs CITROEN JUMPER, FIAT DUCATO, PEUGEOT BOXER

Crankcase guard - under the engine, set, a copy of the original.
Consists of 3 parts:
- middle part (RP150721),
- right side part (RP150715),
- left side part (RP150716).
Suitable for car models:
- CITROEN JUMPER II 2018 - 2021, diesel.
- FIAT DUCATO III 2018 - 2021, diesel.
- PEUGEOT BOXER II 2018 - 2021, diesel.
Crankcase protection effectively protects engine components from damage and extends their service life.
It is made of high quality HDPE material, which guarantees high mechanical and chemical resistance, as well as to temperature changes.

Stock: 0 pcs.

Kartera aizsargs CITROEN C 4 PICASSO

Crankcase protector.
No. OE: 9678270980, 9806821580, 9678271280, 9678271180, 9816497080
Fits car models:
- CITROEN C4 PICASSO II 2013-2018, diesel, engine versions: 1.2,1.6,2.0,
- CITROEN GRAND PICASSO II 2013-2021, diesel, engine versions: 1.2,1.6,2.0,
- CITROEN C4 SPACETOURER 2018-2022, petrol, diesel, engine versions: 1.2,1.6, 2.0,
- CITROEN C4 GRAND SPACETOURER 2018-2022,petrol, diesel, engine versions: 1.2,1.6, 2.0,
- OPEL COMBO E 2018 - ,diesel, engine versions: 1.5 (102 hp),
- PEUGEOT 308 II 2013-2021, diesel, engine versions: 1.2, 1.5, 1.6, 2.0.

Stock: 0 pcs.

Under engine cover PEUGEOT 406

Stock: 0 pcs.

Engine protection VW TOURAN

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Under engine cover TOYOTA AVENSIS

Stock: 0 pcs.

Under engine cover TOYOTA AVENSIS

Under engine cover TOYOTA AVENSIS II 2003 - 2006
diesel, engine: 2.0 turbo, pre facelifting

Stock: 0 pcs.