Skid plates

Engine protection NISSAN X-TRAIL

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection AUDI A 6

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection CITROEN C-CROSSER,PEUGEOT 4007

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection CITROEN C 4,MITSUBISHI ASX

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET VW T 5/T 6

Code 2.0307.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET NISSAN X-TRAIL/KOLEOS

Stock: 0 pcs.

Degvielas bāka aizsargs MET VW AMAROK

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Engine and gearbox protection MET HONDA CIVIC

Stock: 0 pcs.

Transfer case protection MET FIAT FULLBACK,MITSUBISHI L 200

Stock: 0 pcs.

Engine, gearbox and radiator protection MET VW GOLF VII

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine and gearbox protection MET CHEVROLET CRUZE

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI SANTA FE

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IX 55/VERACRUZ

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CITROEN BERLINGO,PEUGEOT PARTNER

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET NISSAN PRIMASTAR,OPEL VIVARO,RENAULT TRAFIC

Code 2.0484.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FIAT LINEA

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FIAT PUNTO

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FIAT SEDICI,SUZUKI SX 4

Stock: 0 pcs.

Engine and gearbox protection MET JEEP RENEGADE

Stock: 0 pcs.

Engine and gearbox protection MET LEXUS RX 200t

Stock: 0 pcs.