Lamp bracket

Režģa stiprinājumi

Linear centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. The mount fixes into the channel on the back of the Linear heatsink, and secured using M5 grub screws. Bracket orientation can be reversed in order to have the light mounted upwards or hanging down relative to the vehicle mounting point. Mounting kit includes anti-rotation features.
For use with Linear products only.

Stock: 0 pcs.

Režģa stiprinājumi

The LAZER-1121K kit consists of a 2-mm thick stainless steel stabilizing bracket, consisting of two parts, which corresponds to the Lazer Lamps series of Triple-R or ST / T LED floodlights.
The stabilizer arm is attached to the lamp using the supplied low-profile bracket, and then secured to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress and movement, which can affect some lighting installations.
Length: 130 mm - 230 mm

Stock: > 1 pcs.

Montāžas kronšteins

Headlamp mount.kitfor VW AMAROK, mounted in original position, without drilling.

Color: Black

Stock: 0 pcs.

Grille mount brackets

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: 0 pcs.

Lampu turētājs

Mounting bracket for warning lamps
AKC1007L-A
- with wires 25 cm
- weight 0,23 kg

Stock: 0 pcs.

Magnētiskais statīvs

Magnetic pad for FT-036 work lamps with a rubber cover.

Stock: > 1 pcs.

Mounting kit

Mounting kit.
1012K
Black colour
Material: stainless steel
The side mount kit Lazer Lamp Kit offers complete versatility and flexibility of assembly combined with an elegant design.

Stock: 0 pcs.

Mounting kit

Mounting kit NPM03
Black colour
Material: aluminum
Model Type: Fits under license plate.
The kit for the Lazer Lights Stay Bar, modified in 2018/9, is the ideal solution for installing additional lighting for your car. This mount consists of two parts made of lightweight aluminum with a smooth, black powder coating.
  The mount is specifically designed to provide a rigid mount for lamps.
Designed for all Led Lazer lamps marked ECE.

Stock: 0 pcs.

Mount lights

MOUNTING BRACKET 46-51 mm
-WEIGHT: 0.22 KG
-color black

Stock: 0 pcs.

Lampu turētājs

HOLDER FOR WORKING LAMPS
above front registration number
-WEIGHT: 0.82 KG

Stock: > 1 pcs.

Magnētiskais lampu turētājs

A set of magnetic holders for fixing off-road and working lights.
   Great for night expeditions, allowing you to quickly assemble and disassemble the design with lamps.
   The kits were tested with 120W, 180W and 240W lighting fixtures installed on both the hood and the roof of the car.
     The fastening was tested under emergency braking at a speed of 100 km / h.
   Allows you to change the angle of the light beam and its direction.
Magnets are filled with rubber, which protects the paint of the car during contact with the bodywork.
   Weight of the set: 1,3 kg

Stock: 0 pcs.

Montāžas kronšteins

Mounting kit

Stock: 0 pcs.

Lampu turētājs

MOUNTING BRACKET 46-51 mm
-WEIGHT: 0.22 KG
-color black

Stock: 0 pcs.

Lampu turētājs

Headlight mounts.
- 70 mm.
material
- black painted stainless steel.

Stock: > 1 pcs.

Anti-theft kit

Stock: > 1 pcs.

Mounting kit

NPM02
Black colour
Material: aluminum
Model Type: Installation under the license plate.
This is an ideal, low-cost solution for installing additional lighting in your car. Made from lightweight aluminum with smooth black powder paint, the mount is specifically designed to provide a stiff and lightweight mounting frame. Designed for 4x2 or 8x1 LED bulbs.

Stock: 0 pcs.

Lamp holder

Stock: > 1 pcs.

Lampu turētājs

Lamp holder
-70 mm.
-material stainless steel.

Stock: > 1 pcs.

Lampu turētājs

Lamp holder
-76 mm.
-material stainless steel.

Stock: > 1 pcs.

Mount lights

Stock: 0 pcs.