Towbars

Pakāpiens uz sakabes āķa

Tow bar hitch step.
- the material is very durable, stainless steel.

Stock: > 1 pcs.

Piekabes āķa detaļa

740.043 towing hook with ball max: 3500kgs
Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
D value: 17 kN
S value: 250 kg

Stock: 0 pcs.

Combination ball head

740.043 towing hook with ball max: 3500kgs
Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
Max. 28.6
D value: 17 kN S value: 250 kg

Stock: 0 pcs.

Piekabes āķa detaļa

Trailer weight: 3500 kg
Ball diameter Ø 50 mm.
The flange is fastened with two screws, with clamp
  equipped with a clamp. You can tow traditional trailers or trailers equipped with a drawbar with a loop.
The clamp provides additional protection against the uncoupling of the trailer.
The mechanism is intended for vans equipped with support beams with two holes It is certified for use in all countries of the European Union.

Stock: 0 pcs.

Combination ball head

Trailer weight: 3500 kg
Ball diameter Ø 50 mm.
The flange is fastened with four screws (pitch 90x40 mm), with clamp
  equipped with a clamp. You can tow traditional trailers or trailers equipped with a drawbar with a loop.
The clamp provides additional protection against the uncoupling of the trailer.
The mechanism is intended for vans equipped with support beams with four holes (plate with two rows and a pitch of 90 x 40 mm).
It is certified for use in all countries of the European Union.

Stock: 0 pcs.

Piekabes āķa detaļa

Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
D value: 17 kN
S value: 250 kg

Stock: > 1 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
It enables turning over, which facilitates the use on low and high towbars.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
-made to order.

Stock: 0 pcs.

Piekabes āķa gals

-AH-10-spec- American-made light car hook.
- ball 50 mm.
-the size of the hole where it is inserted must be 32 x 32 mm.

Stock: 0 pcs.

Tow bar

Decorative and practical cars, rear element. Designed to reduce aerodynamic resistance and pr

Stock: > 1 pcs.

Piekabes āķa gals

-AH-10-spec- American-made light car hook.
- ball 50 mm.
-the size of the hole where it is inserted must be 32x 32 mm.

Stock: 0 pcs.

Piekabes āķa gals

Special hook used for cars with American towbars.
It enables turning over, which facilitates the use on low and high towbars.

Stock: > 1 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
- also allows you to adjust the lifting height of the hook - can be set lower, can be set higher.

Stock: > 1 pcs.

Piekabes āķa gals

-hook for the tow bar.
-we produce according to individual sizes.

Stock: > 1 pcs.

Piekabes āķa gals

out of production

Stock: 0 pcs.

Tow bar

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: > 1 pcs.

Piekabes āķa gals

-hook for the tow bar.
- sizes:
between screws 65mm
apple height 170mm
distance from the middle of the apple to 1 screw 270mm

Stock: 0 pcs.

Tow bar

Stock: > 1 pcs.

Tow bar

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan

Stock: > 1 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 140 kg.

Stock: > 1 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 100 kg.

Stock: > 1 pcs.