Towbars

Tow bar Lexus RX 450h 2019-

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

Tow bar LANDROVER DISCOVERY

Tow bar Vertically detachable (T60) LANDROVER / 2019 / DISCOVERY V (L462) 9/'16 -
Spoiler provided for tow bar must be ordered extra with dealer: / Chassis number up to 084731: / - LR 082 088 INDIS SILVER / - LR 083 036 DARK SILVER / - LR 083 037 WHITE SILVER / - LR 083 038 ANTHRACITE / / Chassis number as from 084732: / - LR 12 33 54 INDIS SILVER / - LR 12 33 55 DARK SILVER / - LR 12 33 56 WHITE SILVER / - LR 12 33 57 ANTHRACITE

Stock: 0 pcs.

Auto sakabes LANDROVER RANGE ROVER

Towbar Vertically detachable (T60) LandRover Range Rover IV 08/'12 -

Stock: 0 pcs.

Auto sakabes TOYOTA YARIS CROSS

Towbar Vertically detachable (T60) TOYOTA YARIS CROSS 07/2021-

Stock: 0 pcs.

Auto sakabes āķis MERCEDES GLE (C167) Coupe 2020-

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes TOYOTA COROLLA CROSS G1 3/2021-

Towbar Vertically detachable (T60) TOYOTA COROLLA CROSS G1 3/2021-
Also suited with option 'handsfree tailgate'

Stock: 0 pcs.

Auto sakabes LANDROVER RANGE ROVER V 10/2021-

Towbar Vertically detachable (T60) LandRover Range Rover V 10/2021-
For standard & long wheel base / Also suited for AD Blue & vehicles with option 'handsfree tailgate'

Stock: 0 pcs.

Auto sakabes LANDROVER RANGE ROVER

Towbar Vertically detachable (T60) LandRover Range Rover Velar 03/17 -
-with the towbar hook removed, the decorative bumper cover is put in place.
-recommended original set of wires SET1021.

Stock: 0 pcs.

Auto sakabes āķis Lexus NX

E3403BV
Comfort, quality and aesthetics are the hallmarks of the vertical detachable ball. The ball snaps in comfortably from below and is effortless to put on. Optical security control. It is supplied with a cap, gloves, a transport bag for the ball and a safety lock.

(To retain the hands-free trunk release feature, you must purchase a new sensor from your dealer. Part number 8910A-78010)

Stock: 0 pcs.

Tow bar JAGUAR F-PACE

ertical hitch, type of mechanism -T60.
The weight of the towed trailer (D) is 2400 kg.
The vertical load on the towbar ball (S) is -175 kg.

Stock: 0 pcs.

Auto sakabes āķis VW PHAETON

Tow bar VOLKSWAGEN Phaeton, 4dv, 2002-
VERTICAL DETACHABLE TOWBAR

Stock: 0 pcs.

Towbar LANDROVER RANGE ROVER

Stock: 0 pcs.

Auto sakabes āķis LANDROVER DISCOVERY SPORT

Tow bar Vertically detachable.
LANDROVER DISCOVERY SPORT 02/2020-

Stock: > 1 pcs.

Auto sakabes āķis MERCEDES BENZ S-klasse (W223)

Tow bar Vertically detachable (T60) for Mercedes Benz S-class (W223,S223), 09.2020-

Stock: 0 pcs.

Tow bar LANDROVER RANGE ROVER

Land Rover Range Rover 2002-2012 Westfalia Detachable Towbar with Jaguar-motor
Mounting tube inc. detachable towball, storage bowl and fitting material (only in connection with 323064600001 or 323074600001)
(with Jaguar-motor) cross bar only Vogue = visible cut

Stock: 0 pcs.

Tow bar LANDROVER RANGE ROVER

Stock: 0 pcs.

Tow bar for camper

Stock: 0 pcs.

Tow bar for camper

Stock: 0 pcs.

Izbīdāmais auto sakabes āķis Volvo XC40 11/17-

Original car tow bar with electric drive, designed for a specific car model.
- When you press the button, the tow bar extends into its working position. When the towbar is not needed, press the button and the towbar will fold behind the bumper. Very convenient and fast to use.
- After installation, when the tow bar is hidden and stored behind the bumper.
- Reliable locking system thanks to acoustic and optical signals.
- A 13-pin socket is built into the end of the hitch hook for connection.
- The kit includes original 13-pin wires that are designed for a specific car model.
- The kit includes everything needed for installation.
- ECE R55 approved.
- EU approved.

Stock: 0 pcs.

Izbīdāmais auto sakabes āķis Audi A4 (B9) 05/15-

Original car tow bar with electric drive, designed for a specific car model.
- When you press the button, the tow bar extends into its working position. When the towbar is not needed, press the button and the towbar will fold behind the bumper. Very convenient and fast to use.
- After installation, when the tow bar is hidden and stored behind the bumper.
- Reliable locking system thanks to acoustic and optical signals.
- A 13-pin socket is built into the end of the hitch hook for connection.
- The kit includes original 13-pin wires that are designed for a specific car model.
- The kit includes everything needed for installation.
- ECE R55 approved.
- EU approved.

Stock: 0 pcs.