Towbars

Auto sakabes āķis VOLVO S 90/V 90

Towbar Volvo S90 II (type 234) 03/'16-, Volvo V90 II (type 235, 236) 03/'16-
-also for vehicles with contactless boot lid / Excl. R-Design.

Stock: 0 pcs.

Safety rope

Safety rope 40 cm.

Stock: > 1 pcs.

Piekabes āķa detaļa

740.043 towing hook with ball max: 3500kgs
Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
D value: 17 kN
S value: 250 kg

Stock: 0 pcs.

Tow bar BMW X1 (F48)/2 (F46)/(F45),MINI COUNTRYMAN/CLUBMAN (F54)

Stock: 0 pcs.

Auto sakabes āķis NISSAN QASHQAI

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12140523 - 7 PIN - oriģinal, 02.2014 - 05.2019
- 21140523 - 13 PIN - oriģinal, 02.2014 - 05.2019
- 12140539 - 7 PIN - oriģinal, 06.2019 >
- 21140539 - 13 PIN - oriģinal, 06.2019 >
- 737118 - 7 PIN - oriģinal, 02.2014 - 04.2019
- 748518 - 13 PIN - oriģinal, 02.2014 - 04.2019
- 737569 - 7 PIN - oriģinal, 05.2019>
- 747278 - 13 PIN - oriģinal, 05.2019>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis NISSAN QASHQAI

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12140523 - 7 PIN - oriģinal, 02.2014 - 05.2019
- 21140523 - 13 PIN - oriģinal, 02.2014 - 05.2019
- 12140539 - 7 PIN - oriģinal, 06.2019 >
- 21140539 - 13 PIN - oriģinal, 06.2019 >
- 737118 - 7 PIN - oriģinal, 02.2014 - 04.2019
- 748518 - 13 PIN - oriģinal, 02.2014 - 04.2019
- 737569 - 7 PIN - oriģinal, 05.2019>
- 747278 - 13 PIN - oriģinal, 05.2019>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis NISSAN QASHQAI

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12140523 - 7 PIN - oriģinal, 02.2014 - 05.2019
- 21140523 - 13 PIN - oriģinal, 02.2014 - 05.2019
- 12140539 - 7 PIN - oriģinal, 06.2019 >
- 21140539 - 13 PIN - oriģinal, 06.2019 >
- 737118 - 7 PIN - oriģinal, 02.2014 - 04.2019
- 748518 - 13 PIN - oriģinal, 02.2014 - 04.2019
- 737569 - 7 PIN - oriģinal, 05.2019>
- 747278 - 13 PIN - oriģinal, 05.2019>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

Auto sakabes āķis MAZDA 3

Options for electrical installation
- 16120525 - 7 PIN - oriģinal, 03.2019 >
- 26120525 - 13 PIN - oriģinal, 03.2019 >
- 737604 - 7 PIN - oriģinal, 01.2019 >
- 747314 - 13 PIN - oriģinal, 03.2019 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis MAZDA 3

Options for electrical installation
- 16120525 - 7 PIN - oriģinal, 03.2019 >
- 26120525 - 13 PIN - oriģinal, 03.2019 >
- 737604 - 7 PIN - oriģinal, 01.2019 >
- 747314 - 13 PIN - oriģinal, 03.2019 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis MAZDA 3

Options for electrical installation
- 16120525 - 7 PIN - oriģinal, 03.2019 >
- 26120525 - 13 PIN - oriģinal, 03.2019 >
- 737604 - 7 PIN - oriģinal, 01.2019 >
- 747314 - 13 PIN - oriģinal, 03.2019 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Tow bar MERCEDES BENZ S-klasse (W222)

Stock: 0 pcs.

Auto sakabes āķis AUDI Q 8

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.

Stock: 0 pcs.

Piekabes āķa skrūvju komplekts

Kit bolts for mounting the towbar hook.
-M12 x 75 mm.

Stock: > 1 pcs.

Sakabes āķa vāciņš

Cap for the tow bar.
- material - rubber.

Stock: 0 pcs.

Sakabes āķa vāciņš

Cap for the tow bar.
- material - rubber.

Stock: 0 pcs.

Sakabes āķa vāciņš

Cap for the tow bar.
- material - rubber.

Stock: 0 pcs.

Sakabes āķa vāciņš

Cap for the tow bar.
- material - rubber.

Stock: 0 pcs.

Sakabes āķa vāciņš

Cap for the tow bar

Stock: > 1 pcs.

Sakabes āķa vāciņš

Cap for the tow bar

Stock: > 1 pcs.

Sakabes āķa automāts

Mechanism for vertical towbar.
Before installing the ball, make sure it is prepared for this. This can be seen from the color of the indicator on the ballpoint pen. The indicator should be red. If not, press down firmly on the knob and turn it (while holding it down) clockwise until it reaches the end position. The handle should remain in this position.
Remove the bottom plug on the towbar beam protecting the inside of the body from contamination. Make sure the inside of the housing is free from dust, sand, dirt, etc. Insert the ball into the housing from below so that the protruding pins fit into the specially prepared places in the housing. Do not touch the handle while inserting the mechanism into the housing.
Then pull the ball towards you (the pins on the left and right sides should be in the grooves on the body). The mechanism should automatically block the ball, and the handle should turn so that a green color appears in the window on the handle, and the handle itself pops out by about 5 mm.
Always check that the color in the dial window is green before using the system. Otherwise, disassemble the balls and start over from the beginning.
The lock in the mechanism serves only as an anti-theft device. It is not an element affecting the safe use of the system. It is safe to use the towbar without a locked key lock if the mechanism is correctly installed as described above.
Close the mechanism lock by turning the key half a turn clockwise. Once the key has been removed, it is not possible to press and turn the handle, and therefore it is impossible to detach the ball. If the mechanism can be closed with a key, then the ball is installed correctly. The most important indicator is the flywheel window, which must be green before towing. Remember to remove the key from the lock before towing. The quick release ball system is now ready for use.

Stock: 0 pcs.