Towbars

Sakabes āķa automāts

Body assembly method:
1. Attach the machine body to the drawbar beam using M12x25mm bolts as shown in the illustration.
Hook installation:
1. To secure the ball, pull the lever down until it stops.
2. Insert the ball into the body so that the pins on the ball fit into the seats in the body.
3. Release the lever. It should return to its original position, which means that the hook mechanism is correctly locked into the body.
4. Insert the cotter pin through the hole in the lever and the hole in the hook shackle.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Rezerves daļa sakabes āķim

Lowering the towbar flange
Sizes:
- height 20.5 cm.
- width 15.5 cm.
- distance between holes: 90 mm x 50 mm.

Stock: > 1 pcs.

Rezerves daļa piekabes āķim

Locking handle for GDW towbar.

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.