Towbars spare parts

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
It enables turning over, which facilitates the use on low and high towbars.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
-made to order.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
- also allows you to adjust the lifting height of the hook - can be set lower, can be set higher.

Stock: > 1 pcs.

Hook

Stock: 0 pcs.

Sakabes āķa gals.

weight - 3.7 kg.
- trailer weight - 3500 kg.
- vertical load - 150 kg.
-manufacturer- WESTFALIA.

Stock: 0 pcs.

Piekabes āķa sijas stiprinājumi

Trailer hook beam 2067 fasteners for Iveco Daily Van 7/9/11m² 2014-
Wheel base 3000 + 3520 - 1 wheel.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 100 kg.

Stock: > 1 pcs.

Tow bar

Stock: > 1 pcs.

Piekabes āķa gals

out of production

Stock: 0 pcs.

Piekabes āķa gals

-AH-10-spec- American-made light car hook.
- ball 50 mm.
-the size of the hole where it is inserted must be 32 x 32 mm.

Stock: 0 pcs.

Tow bar

Stock: > 1 pcs.

Tow bar

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Sakabes āķa automāts

Body assembly method:
1. Attach the machine body to the drawbar beam using M12x25mm bolts as shown in the illustration.
Hook installation:
1. To secure the ball, pull the lever down until it stops.
2. Insert the ball into the body so that the pins on the ball fit into the seats in the body.
3. Release the lever. It should return to its original position, which means that the hook mechanism is correctly locked into the body.
4. Insert the cotter pin through the hole in the lever and the hole in the hook shackle.

Stock: 0 pcs.

Sakabes āķa automāts

Tow bar.

Stock: 0 pcs.

Sakabes āķa gals

KL1 2X4
Towbar hook adapter that allows you to change the model of the hook itself on the towbar.
- the distance of fastening the towbar on the base is 45 mm between the bolts.
- Hook attachment distance at the rear horizontally 90, vertically 55 mm.

Stock: > 1 pcs.

Piekabes āķa gals

Special hook used for cars with American towbars.
It enables turning over, which facilitates the use on low and high towbars.

Stock: > 1 pcs.