Trailer and other

Bremžu trose

Quick installation brake cable NH-A077, AL-KO original, 890 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 890 mm.
- Total cable length(GL): 1086 mm.

Stock: > 1 pcs.

Bremžu trose

Quick installation brake cable NH-A078, AL-KO original, 1620 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 1620 mm.
- Total cable length(GL): 1816 mm.

Stock: 0 pcs.

Bremžu trose

Quick installation brake cable NH-A014, AL-KO original, 1130 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 1130 mm.
- Total cable length(GL): 1326 mm.
- Внутренний диаметр муфты (со стороны барабана): 23 мм.
- Длина внешней оболочкитроса (HL): 1130 мм.
- Общая длина троса(GL): 1326 мм.

Stock: 0 pcs.

Piekabes detaļa

771-RE - towing device.
- Modification: KFG 35D.
- Permissible trailer weight: up to 3500 kg.
- Maximum vertical load: 150 kg.

Stock: > 1 pcs.

Saliekama rampa

Folding ramp 1L-6EKK-7E2Q.
Folding ramp with unique design - made of ultra-light aluminum.
Ideal for loading and unloading motorcycles with trailers and vehicles. It is convenient to store the ramp in a compact form.
- Weighs 8 kg.
- Length in unfolded form: 225 cm.
- Length in folded form: 116 cm.
- Width 28 cm.
- Maximum load: 340 kg
- There is a fastening belt with a hook for reliable fixing of the ramp during use.
В комплект:
- ramp 1 pc.
- крепежный ремень с крючком 1 pc.

Stock: > 1 pcs.

Atbalsta ritenis 60mm

Support wheel for trailers.
- Type: VK 60-KN-200 VBB - automatic.
- Static load 200 kg.
- Pipe diameter: 60 mm.
- Pipe thickness: 4 mm.
- Welded clamping bracket with holes.
- Material: galvanized pipe, plastic handle, steel rim with hard rubber tire.

Stock: > 1 pcs.

Piekabe

Trailer PP75-5916 is a trailer for transporting boats and motor boats with a load capacity of up to 750 kg. Thanks to its low dead weight, it can be towed by all passenger cars. Loadable weight up to 750 kg and length up to 5 meters. The trailer is made of welded steel. Metal elements are galvanized by the method, due to which the steel has a protective layer that protects it from corrosion and mechanical damage. The trailer uses two types of side supports - single and double - equipped with durable rollers. The position of the supports is adjustable both in height and inclination. The trailer is equipped with lights that retract during loading and unloading. The trailer can be fully submerged because it is equipped with waterproof lights. The trailer hubs are also sealed (watertight system) and protect the bearings from water. This extends the life of bearings, hubs and axles. This model is equipped as standard with holders that allow you to securely and confidently fix the load with straps. The trailer can be equipped with additional 4 holders, which will allow you to hook the boat even better and more efficiently on each side.

Equipment:
• Gross weight 750 kg
• Net weight 193 kg
• Load capacity 557 kg
• Maximum loading length 5000 mm
• Maximum loading width 1170 mm
• External dimensions 1574 x 5877 x 1271 mm
• Support wheel
• Manual winch
• Waterproof lights
• One axis
• Wheel size R13

Stock: > 1 pcs.

Piekabe

MT-2 trailer for two motorbikes. The dedicated single-axle trailer for the transport of two motorbikes with a loading capacity of 750 kg is the ideal means of transporting singletrack. The MT-2 is a modern motorcycle trailer made in a fashionable, simple design for transporting 2 motorbikes. The trailer is made entirely of steel, and the frame of the trailer is protected against corrosion with a layer of zinc, which also strengthens it against mechanical damage. In addition, it is powder-coated in black, giving it an elegant and classic look to match any single track. The chassis structure and drawbar are made of a closed steel profile. The frame of the trailer is further reinforced using transverse welded brackets. This guarantees the stability and reliability of the entire structure.

The motorbike trailer for two motorcycles is equipped with a convenient-to-use mechanism for raising and lowering the platform. This makes it easy to bring motorbikes in or out of the trailer.
The MT-2 is constructed with two movable frames so that it can be easily folded in half. The folded trailer can be stored both vertically and horizontally. This allows it to be stored when not in use. In this way, it will take up much less space in the garage or car park, for example. When folded in half, the trailer has a height of 2574 mm. The technical solutions used in the motorcycle trailer are protected by a global patent.

The trailer for two motorbikes has a jockey wheel and LED lighting as standard. The trailer is coated in black. The floor of the trailer is lined with corrugated aluminum sheets and numerous holders for transport belts (4 per side and through the center of the platform). The trailer can be additionally equipped with a spare wheel, alloy wheels, anti-theft protection, and a wind deflector or railing limiting the overrun. The use of a front railing turns the MT-2 into a trailer for transporting quads. In addition, the trailer can be optionally equipped with a dedicated two-bike carrier or cross-bike stand. The MT-2 trailer is designed in such a way that 3 racks can easily be placed on it at the same time, making it a trailer for 3 cross bikes.
Technical data and specifications:
- Full weight 750 kg
- Net weight 249 kg
- Load capacity 501 kg
- Maximum length of loading surface 2396 kg
- Maximum loading surface width 1743 mm
- External dimensions (width x length x height): 2396 x 3491 x 962 mm
- One axle
- Axles without brakes
- Spare wheel
- Wheel type R13

Stock: > 1 pcs.

Piekabe

Trailer MT-1. A light and easy-to-use motorcycle trailer is a perfect solution for all lovers of two-wheelers. It allows the safe transportation of modern, classic, and sports motorcycles. A dedicated single-axle trailer for transporting motorcycles with a loading capacity of up to 750 kg is an ideal means of transporting the two-wheelers. Its structure is settled on a stable frame, additionally supported by transverse reinforcements, to which a tow bar is welded. The trailer frame has been protected against corrosion by a hot-dip galvanizing process with passivation, which strengthens it against mechanical damage. In addition, it is powder-coated in black to give it an elegant and modern look.

The MT-1 trailer is equipped with a convenient-to-use mechanism for raising and lowering the platform. We have included a wheel mount in the front of the motorbike trailer, which allows stable positioning of the vehicle. When designing the trailer for transporting motorcycles, we also considered the convenience of its storage. Because the trailer is made of two movable parts (HALF-FOLD system), it can be easily folded in half, which will make it easier to store the trailer when is not used. Thus, it will take up much less space in the garage. The trailer folded in half has the following dimensions: 2325 x 1710 x 650 mm. The technical solutions used in the motorcycle trailer are protected by a global patent.

The MT-1 motorbike trailer has a support wheel and LED lighting as standard. Its floor is made of corrugated aluminium sheets. The trailer has numerous holders for attaching transport belts and a wheel-locking wedge. In addition, it can be retrofitted with alloy wheels, shock absorbers with mounts, a spare wheel with mounts, a bike carrier, or a special stand dedicated to the transport of cross bikes.

Technical data and specifications:
- Full weight 750 kg
- Net weight 170 kg
- Load capacity 580 kg
- Maximum length of loading surface 2386 mm
- Maximum loading surface width 1040 mm
- External dimensions (width x length x height): 1710 x 3228 x 956 mm
- One axle
- Axles without brakes
- Spare wheel
- Wheel type R13

Stock: > 1 pcs.

Piekabe

Trailer PLI35-5521. It is a safe and proven means to transport the car to any place. With integrated overrun gangways, the transported vehicle can easily enter or go down. It is suitable for both personal (individual) and fully professional use (car workshops, roadside assistance). It is the largest car carrier with a loading capacity of 3,500 kg. The vehicle has a tilting platform with integrated overrun gangways that make up an approach angle of 11°. Overrun gangways with ramps are made of perforated and pressed sheets of the 'LOHR” type. The model is equipped with the LIGHT SIDE system, which is responsible for tilting the rear lamps, which protects them from possible damage when entering or going down the car. The overrun frame tilts by gravity.

The frame and body of the model are fully welded, which affects their strength and guarantees the reliability of the vehicle. The structure is protected by hot galvanizing, with which the steel receives a protective layer that strengthens it against mechanical damage and corrosion. The tilting ramp and drawbar of the car carrier are made of hollow sections, which gives rigidity and stability to the entire car carrier and affects its long life and trouble-free operation. The PL35-5521 car carrier has a loading capacity of 3500 kg, therefore its load capacity enables transporting goods weighing up to 2701 kilograms having a length of up to 5.5 and a width of up to 2.01 meters. The car carrier is equipped with 2 braked axles. The tilting ramp is equipped with shock absorbers that facilitate loading and unloading the vehicle. Optionally, the car carrier can be equipped with a one- or two-way hydraulic pump. The trailer, as standard, includes a support wheel, manual 1135 kg winch, wedges for blocking trailer wheels as well as overrun and parking brakes. Optionally, it can also be equipped with floor fillings made of riffled aluminum plate or anti-slip plywood, shock absorbers for axles, an electric winch, a hydraulic pump, and wheel locks for the transported vehicle.

Technical data and specifications:
- Full weight 3500 kg
- Net weight 799 kg
- Load capacity 2701 kg
- Maximum length of loading surface 5858 mm
- Maximum width of loading surface 2160 mm
- External dimensions (width x length x height): 2160 x 7314 x 664 mm
- Wedges for locking trailer wheels
- Manual 1135 kg winch
- Shock absorbers
- Number of axles: 2
- Axles with brakes
- Wheel type R13
- Angle of approach 11° degrees

Stock: 0 pcs.

Piekabe

Trailer PB75-2614/2 is a two-axle, lightweight trailer without brakes, with a load capacity of up to 750 kg. It features an innovative hinge release system that allows all sides and posts to be easily removed, ensuring a completely flat platform. The trailer frame is very rigid. The trailer sides are 35 cm high. They are made of galvanized sheet metal, which guarantees their high strength and resistance to corrosion. The standard PB75-2614 is equipped with a safe, waterproof and non-slip floor, as well as a durable support wheel.

Specifications:
• Gross vehicle weight 750 kg.
• Complete kerb weight 257 kg.
• Load capacity 493 kg.
• Support wheel.
• Maximum length of the loading surface 2609 mm.
• Maximum width of the loading surface 1384 mm.
• Waterproof and non-slip plywood flooring.
• Fastenings for securing cargo installed in the trailer frame.
• Loading surface height 35 cm.
• Wheel size R13.

The trailer can be additionally equipped with:
• Tent - TENT-PB75-2614/1/2.
• Spare wheel.

Stock: > 1 pcs.

Piekabe

Trailer PB75-2614/1 is a one-axle, lightweight trailer without brakes, with a load capacity of up to 750 kg. It features an innovative hinge release system that allows all sides and posts to be easily removed, ensuring a completely flat platform. The trailer frame is very rigid. The trailer sides are 35 cm high. They are made of galvanized sheet metal, which guarantees their high strength and resistance to corrosion. The standard PB75-2614 is equipped with a safe, waterproof and non-slip floor, as well as a durable support wheel.

Specifications:
• Gross vehicle weight 750 kg.
• Complete kerb weight 207 kg.
• Load capacity 543 kg.
• Support wheel.
• Maximum length of the loading surface 2609 mm.
• Maximum width of the loading surface 1384 mm.
• Waterproof and non-slip plywood flooring.
• Fastenings for securing cargo installed in the trailer frame.
• Loading surface height 35 cm.
• Wheel size R13.

The trailer can be additionally equipped with:
• Tent - TENT-PB75-2614/1/2.
• Spare wheel.

Stock: > 1 pcs.

Piekabe

Multi-purpose flatbed trailer PU75-2613 is a single-axle lightweight trailer without brakes, with a gross weight of up to 750 kg, with a tilting loading platform.
The trailer sides are 25 cm high. They are made of galvanized sheet metal, the metal coating of which guarantees their high strength and resistance to corrosion.
As standard, the trailer has a safe, waterproof and non-slip floor, which makes it easy to move around the platform and place loads on it, and there are 6 hooks inside for attaching transport belts.

Specifications:
• Gross vehicle weight 750 kg.
• Complete kerb weight 148 kg.
• Load capacity 602 kg.
• Maximum length of the loading surface 2630 mm.
• Maximum width of the loading surface 1281 mm.
• Waterproof and non-slip plywood flooring.
• Side height 25 cm.
• Wheel size - R13.

The trailer can additionally be equipped with:
• Tent - TENT-PU75-2613.
• Spare wheel.

Stock: > 1 pcs.

Aizmugures lukturis kreisais

Rear lamp LZT 329 left L2403.
- Rear combination lamp with reflector and orange turn signal.
- Supply voltage: 12/24V.
- Light functions: rear marker, brake, marker, fog, license plate lighting.

Stock: > 1 pcs.

Aizmugures lukturis labais

Rear lamp LZT 328 right L2402.
- Rear combination lamp with reflector and orange turn signal.
- Supply voltage: 12/24V.
- Light functions: reverse position, brake, turn signal, license plate light.

Stock: > 1 pcs.

el. dakšas turētājs

UW-03-03 - trailer socket fixing element.

Stock: > 1 pcs.

Trailer part

Stock: 0 pcs.

Piekabes detaļa

The SD-04-SP is an easy and quick to use trailer part. Made of durable rubber that protects your car's rear bumper and trailer mount during the installation of the trailer. The trailer parts do not require any special care because they are made of dust, heat and cold-resistant rubber.

Stock: > 1 pcs.

Trailer part

Stock: > 1 pcs.

Piekabes detaļa

Mudflap
W=200mm.
H=225mm.

Stock: > 1 pcs.