Skid plates

Engine protection TOYOTA RAV 4

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection CHEVROLET CRUZE

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection FIAT BRAVA/BRAV0/MAREA

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection PEUGEOT 407

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET VOLVO V 70/XC 70/S 80/XC 60/V 60

Code 2.0529.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Engine and radiator protection MET FIAT FULLBACK,MITSUBISHI L 200/PAJERO SPORT

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CITROEN JUMPY,PEUGEOT EXPERT/TRAVELLER,TOYOTA PROACE

Year of release: 2017-
Engine: V-2.0 HDI
Transmission: Any
Material: 2 mm steel.
Fasteners: A complete set of fasteners

Stock: > 1 pcs.

Engine protection MET JAGUAR F-PACE

Stock: 0 pcs.

Engine, gearbox and radiator protection MET NISSAN NV 200

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CHEVROLET HHR

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FIAT TIPO

Stock: 0 pcs.

Engine and gearbox protection MET HONDA CIVIC

Stock: 0 pcs.

Engine and gearbox protection MET HONDA CIVIC

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine, gearbox and absorber MET CITROEN C 1,PEUGEOT 108,TOYOTA AYGO

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FIAT DOBLO,OPEL COMBO

Stock: 0 pcs.

Engine, gearbox and radiator protection MET RENAULT VEL SATIS/ESPACE

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CITROEN JUMPY,FIAT SCUDO,PEUGEOT EXPERT

Stock: 0 pcs.

Engine and gearbox protection MET MITSUBISHI LANCER

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET TOYOTA AURIS/PRIUS/COROLLA

Protection for the engine, gearbox, radiator Toyota Corolla
E14 / E15.
-except 1.3, 1.8 and except for a / m from America with a 1.8 hatchback engine.
Engine: all engines.
Transmission: any.
Material: steel 2 mm.
Manufacturer: Kolchuga ™ (Ukraine).
Mount: full set of mounts.

Stock: 0 pcs.

Engine and gearbox protection MET TOYOTA RAV 4

Stock: 0 pcs.