Skid plates

Engine, gearbox and radiator protection MET CITROEN JUMPY,FIAT SCUDO,PEUGEOT EXPERT

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Crankcase protection, code 2.0783.00 - engine, gearbox, radiator guard.
Suitable for car models:
- CITROEN JUMPER, 2.0 Hdi, 2.2 Hdi, 2014-
- FIAT DUCATO, 2.2 Hdi, 3.0 D, 2014-
- PEUGEOT BOXER, 2014- (for cars with plastic protection).
Is covered by layer of zinc, paint and varnish.
The Kolchuga engine compartment protection is made of high-quality materials using modern technologies. They are based on cold-rolled steel with a thickness of 2 mm or 3 mm (depending on the car model).
Each protection has an anti-corrosion coating that protects the crankcase not only from physical impacts, but also the entire engine compartment - from water, dust, dirt, which significantly increases the service life of belts, rollers and other moving engine parts. compartment.
The protection has a unique shape that follows the shape of the bottom of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, making the installation process as simple as possible.
All necessary fasteners are included in the kit.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CHEVROLET SUBURBAN

Stock: 0 pcs.

Dzinēja un radiatora aizsargs MET BMW 3 (F25)

Code 2.0661.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Sadales kārbas un pakaļēja tilta aizsargs MET AUDI Q 7,PORSCHE CAYENNE,VW TOUAREG

Transfare case andre rear axle protection MET AUDI Q 7,PORSCHE CAYENNE,VW TOUAREG

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA PROACE/PROACE VERSO,CITROEN JUMPY,PEUGEOT EXPERT

Under engine cover aluminium.
- 5 mm.

Stock: 0 pcs.

Kartera aizsargs NISSAN NV 400,OPEL MOVANO,RENAULT MASTER

Crankcase protection, very elastic and durable material.

Stock: 0 pcs.

Under engine cover AUDI A 4/A 5

Stock: 0 pcs.

Kartera aizsargs FORD KUGA

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Wheel Arch Protection

Stock: 0 pcs.

Wheel Arch Protection

Stock: 0 pcs.

Engine protection BMW MINI COOPER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection MERCEDES BENZ VITO

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs FORD FOCUS/TRANSIT

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Kartera aizsargs FORD KUGA

The protection under the bumper is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Under engine cover BMW 5 (E60)/(E61)

BMW 5 (E61) 2003 - 2010
petro, engines: 2.0, 2.5, 3.0, 4.5, 5.0, diesel,engines: 2.0, 2.5, 3.0, 3.5
BMW 5 (E60) 2003 - 2010
petrol, engines: 2.0, 2.5, 3.0, 4.5, 5.0, diesel, engines: 2.0, 2.5, 3.0, 3.5

Stock: 0 pcs.

Skid plate AL

Skid plate: transfer case, 6 mm Aluminium

Stock: 0 pcs.

Kartera aizsargs AUDI A 4/A 5

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.

Under engine cover VOLVO S 60/S 80/V 70

Stock: 0 pcs.

Kartera aizsargs AUDI A 6/A 7

The crankcase is new, a copy of the original.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: > 1 pcs.