Skid plates

Engine protection HONDA CR-V

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection BMW 7 (E32)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection HONDA ACCORD

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection HONDA STREAM

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Engine protection HONDA FR-V

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Skid plate MET AUDI A 3,SEAT LEON,SKODA SUPERB,VW GOLF VII/PASSAT (B8)

Stock: > 1 pcs.

Kartera aizsargs MET AUDI A 3,VW GOLF VII

Сode 26.2415
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Engine protection TOYOTA LAND CRUISER 120

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs MET SKODA ROOMSTER

Сode 21.1217
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kompozītmateriāla motora aizsargs CITROEN BERLINGO

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs MET SUBARU LEGACY

Сode 22.0598
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kompozītmateriāla motora aizsargs

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs

Stock: 0 pcs.

Under engine cover CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Under engine cover

Stock: 0 pcs.

Kartera aizsargs MET FIAT PANDA

Сode 07.0995
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Engine protection BMW 5 (E39)

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs MET MAZDA 6

Сode 12.1368
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kartera aizsargs MET KIA CEED

Сode 11.1605
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.

Kartera aizsargs MET MITSUBISHI ASX

Сode 14.1862
Crankcase protection is a necessary part of every car.
It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle.
The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters.
Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects.
The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot.
The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime.
Powder coating applied using a special technology,
has a high resistance to damage and prevents corrosion.
In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving.
The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance.
The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners.
'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength.
Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.

Stock: > 1 pcs.