Towbars

Auto sakabes āķis KIA EV6

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis KIA EV6

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: > 1 pcs.

Auto sakabes āķis VOLVO V90 Cross Country

320167600001 - production of WESTFALIA.
Towbar on VOLVO V90 Cross Country 2016-
Quick-release, vertical ball mount on the key. Invisible bumper cutout.
Loads:
- the mass of the towed trailer is 2200 kg.
- vertical load -150 kg.
- weight of the towbar 23 kg.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Auto sakabes āķis Mercedes Citan, Renault Kangoo

Towbar Horizontally detachable
Renault Kangoo III
2021-
Mercedes Citan (type W420)
2021-
Mercedes T-Class (type W420)
2022-
Nissan Townstar (type XFK)
2022-

Stock: 0 pcs.

Auto sakabes āķis SUBARU XV 2017-

348077600001 - production of WESTFALIA.
Towbar onSUBARU XV 2017-
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.
- the mass of the towed trailer is 1940 kg.
- vertical load -90 kg.
- weight of the towbar 23 kg.

Stock: 0 pcs.

Auto sakabes āķis SUBARU XV 2017-

348078600001 - WESTFALIA.
Trailer hook SUBARU XV 2017-
Quick release vertical ball mount on key.
Without cutting into the bumper.
Loads:
- the mass of the trailer is 1940 kg.
- vertical load -90 kg.
- tow hook weight 22 kg.

Stock: 0 pcs.

Auto sakabes āķis MERCEDES BENZ A-klasse (V177

Invisible Detachable Tow Bar MERCEDES BENZ A-klasse (V177, W177), B-klasse (W247)

Stock: 0 pcs.

Sakabes āķa vāciņš

Cap for the tow bar

Stock: > 1 pcs.

Sakabes āķa gals

Removable hook for a towbar from a RANGE ROVER EVOQUE
Car. supplied as an original spare part.

Stock: 0 pcs.

Rezerves daļa sakabes āķim

Lowering the towbar flange
Sizes:
- height 20.5 cm.
- width 15.5 cm.
- distance between holes: 90 mm x 50 mm.

Stock: > 1 pcs.

Tow bar SUZUKI JIMNY

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Auto sakabes āķis VW ID.4

322091600001 - production of WESTFALIA.
Towbar onVW ID.4 05/2020-
Quick-release, vertical ball mount on the key. Invisible bumper cutout.
Loads:
- the mass of the towed trailer is 1400 kg.
- vertical load -100 kg.
- weight of the towbar 19 kg.

Stock: 0 pcs.

Auto sakabes āķis TOYOTA RAV 4

320170600001 - WESTFALIA.
Trailer hook TOYOTA RAV 4 2006-2013
Quick release vertical ball mount on key.
Without cutting into the bumper.
Loads:
- the mass of the trailer is 2000 kg.
- vertical load -80 kg.
- tow hook weight 36 kg.

Stock: 0 pcs.

Sakabes āķa automāts

Tow bar.

Stock: 0 pcs.

Auto sakabes āķis MERCEDES BENZ GLB-klasse (X247)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis MERCEDES BENZ GLB-klasse (X247)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis MERCEDES BENZ GLB-klasse (X247)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.