All products

Auto sakabes āķis VOLVO V 90 Cross Country

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Spare wheel and tool kit

Compact spare wheel and tool kit, RRZKD5114601459016LLTOYYARCROP.
- Size: 145/90 R16.
- Tire brand: LINGLONG.
- Bolt spacing: 5 x 114,3 x 60,1 mm.
The kit includes:
- Compact spare wheel (removable) 145/90 R16.
- Trapezoidal jack with ratchet mechanism.
- Wheel wrench with 2 attachments.
- Case for storing the jack and wheel wrench.
- Cover for spare wheel.
- Protective gloves.

Stock: 0 pcs.

Tow bar VOLVO V 90 Cross Country

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Paklājs bagāžniekā TOYOTA SIENNA

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Side steps

Stock: > 1 pcs.

Halogēna auto spuldze HB4 9006 51W 12V

Code 03367
Halogen lamp HB4 9006 51W 12V.
low beam
Type-HB4.
Voltage -12 V.
The rated power is 55 W.
Basis: P20d.
UV filter yes.
Statement-ECE R-37.

Stock: > 1 pcs.

Halogēna auto spuldze HB3 9005 60W 12V

Code 03366
Halogen lamp HB3 9005 60W 12V.
low beam
Type-HB3.
Voltage -12 V.
The rated power is 60 W.
Basis: P20d.
UV filter yes.
Statement-ECE R-37.

Stock: > 1 pcs.

Halogen lamp

Code 03365
Halogen lamp H11 55W 12V.
low beam
Type-H11.
Voltage -12 V.
The rated power is 55 W.
Basis: PX26d.
UV filter yes.
Statement-ECE R-37.

Stock: > 1 pcs.

Nostriprinājuma trose

Ratchet strap with automatic tensioner.

Technical data:
-Width: 50 mm
- Rope length: 4.5 meters
- Tension force: 750 kg
- Rope strength: 1500 kg
- The automatic winding mechanism makes the work easier.
- Complies with European standard EN 12195-2.

Stock: > 1 pcs.

Nostriprinājuma trose

Ratchet strap with automatic tensioner.

Technical data:
-Width: 25 mm
- Rope length: 3.5 meters
- Tension force: 320 kg
- Rope strength: 640 kg
- The automatic winding mechanism makes the work easier.
- Complies with European standard EN 12195-2.

Stock: > 1 pcs.

Nostriprinājuma trose

Ratchet strap with automatic tensioner.

Technical data:
-Width: 25 mm
- Rope length: 3.5 meters
- Tension force: 320 kg
- Rope strength: 640 kg
- The automatic winding mechanism makes the work easier.
- Complies with European standard EN 12195-2.

Stock: > 1 pcs.

Heated mat for seat

Product description:
Car seat heating mat - operated from the car cigarette lighter, is convenient for drivers and passengers when driving in autumn or winter.
The mat has a large heating surface, high power and quickly reaches temperature. It has a universal size and shape. Using special flexible fasteners, it can be adapted to any type of car seat.
The carpet wiring is protected against overheating to avoid accidents while driving.
The control remote control with which the product is equipped provides quick and convenient access to temperature regulation.

Technical data:
Material: sponge and fabric
Dimensions: 98 cm x 50 cm
Black color
Power supply: 12V DC
Heating temperature: 45℃-65℃

Stock: > 1 pcs.

Caps for valves

Decorative caps for valves.
- Aluminum, blue color.
- Suitable for all types of valves.
- Includes 4 pieces.

Stock: > 1 pcs.

Caps for valves

Decorative caps for valves.
- Aluminum, red color.
- Suitable for all types of valves.
- Includes 4 pieces.

Stock: > 1 pcs.

Caps for valves

Decorative caps for valves.
- Aluminum, black color.
- Suitable for all types of valves.
- Includes 4 pieces.

Stock: > 1 pcs.

Caps for valves

Decorative caps for valves.
- Aluminum, silver color.
- Suitable for all types of valves.
- Includes 4 pieces.

Stock: > 1 pcs.

Ledus skrāpis

Scraper for glass.

Stock: > 1 pcs.

El.vadi

1605-WK045 - set of wires for connecting two additional lights.
- Voltage: 12/24 V
- Max.12V 2x150W, 24V 2x300W.
- 4-pin DT-4 connector.
- CAN compatible.
- Protected from corrosion.
- Fully electronic structure, replaces fuse and relay.
- Built-in current leakage protection.
- Also works in cars where current is supplied to the headlights in pulses.

Stock: > 1 pcs.

Lietus necaurlaidīga folijas uzlīme auto spoguļiem

PROPERTIES:
The hydrophobic foil prevents water vapor and moisture from accumulating on the mirror
It facilitates the drainage of water from the mirror surface during rainfall, significantly improving visibility
DIMENSIONS: (length x width)
135x95 mm
The set includes:
- 2 foils
- assembly accessories.

Stock: > 1 pcs.

Aizsargstienis RENAULT TRAFIC

Front bar, code 828442
Diameter - 60 mm,
Material -AISI304
Surface - polished
Weight - 9 kg
Additional Information:
- compatible with radar
- compatible with parking sensors
- compatible with towing hook

Stock: 0 pcs.