Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību. Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē. Lasīt vairāk

Choose your car model

Car brand:
Car model:

Latest news

NEW ! Snowplow for pick-up

01.12.2023 Read more >

 
Towbar

01.12.2023 Read more >

 

All news >

ML-SERVISS

SIA ML-SERVISS Maskavas ielas fil.


See our location on map

Address: Mazjumpravas street 66, Riga, Latvia, LV-1063

Phone: (+371) 66116670
            (+371) 29212095

Email: info@mlserviss.lv

WhatsApp (+371) 29212095

SIA ML-SERVISS filiāle "Jugla"

See our location on map

Address: Brivibas gatve street 422, Riga, Latvia, LV-1024

Phone: (+371) 29522111
           
Email: brivibas@mlserviss.lv

All products

Order by:
 
 
Category filter:
Car brand
Product Code Price Number
Bremžu trose

Quick installation brake cable NH-A077, AL-KO original, 890 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 890 mm.
- Total cable length(GL): 1086 mm.

Stock: > 1 pcs.

NH-A077

Price: 24.00 €

Add to cart

View

Bremžu trose

Quick installation brake cable NH-A078, AL-KO original, 1620 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 1620 mm.
- Total cable length(GL): 1816 mm.

Stock: 0 pcs.

NH-A078

Price: 21.00 €

Add to cart

View

Tow bar E0412AV

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
AUDI Q7/Q8. Check maximum towing capacity !!! Max vertical 180kg
Before installing the hook, make sure it is prepared for this. It depends on the color of the indicator located on the handle. The indicator should be red. Otherwise, press the knob and turn it (always pressed) clockwise until it reaches its final position. The handle must remain in this position.
Remove the plug that protects the inside of the housing from dirt. Make sure the inside of the case is not contaminated with dust, sand, etc. Insert the hook into the case from below so that the protruding pins are inserted into the prepared places in the case.
When inserting the hook into the housing, do not touch the rotary knob. Then pull the ball towards you (the ball pins on the left and right sides must be in the housing cavities). The mechanism should automatically lock the hook, and the handle should turn so that a green color appears in the window on the handle, and the handle itself snaps off by about 5 mm.
Before using the system, always check that the handle window is always set to green. Otherwise, remove the hook and start assembly from the beginning.
C. The lock in the mechanism is an anti-theft device. This is not an element that affects the safety of using the system. It is safe to use the towbar without a lock if the mechanism is installed correctly in the manner described above.
D. Close the mechanism lock by turning the key half a turn clockwise. Once the key is removed, it is not possible to press and turn the handle and thus the hook cannot be removed. If you can close the mechanism with the key, it means that the ball is correctly installed. The most important indicator remains the window on the handle, which should indicate green before towing begins. Be sure to remove the key from the mechanism lock before towing. The quick release system is now ready to use.
Withdrawal.
Always unhitch the trailer before releasing the ball and any accessories that interfere with access to the ball release mechanism.
Open the mechanism lock by turning the key half a turn counterclockwise.
Hold the hook with your left hand. Push down on the knob and then (the knob will be pressed all the time) turn it fully clockwise. The handle must remain in this position.
The hook should come out of the housing under the action of gravity. Support the hook so that it does not fall to the floor.
After removing the ball from the housing, insert the supplied plug, which protects the inside of the housing from contamination.
When not in use, the hook should be stored in a safe, clean and dry place. If it is stored in a vehicle, it must be secured in such a way that it cannot move freely. A loose hook can be a threat in case of sudden braking or making any sudden maneuvers.

Stock: 0 pcs.

E0412AV

Price: 495.00 €

Add to cart

View

Bremžu trose

Quick installation brake cable NH-A014, AL-KO original, 1130 mm.
Original brake cable (Bowden cable) for AL-KO brake axles.
The cable is coated with a special material, which guarantees its long-term use.
- Diameter of the mushroom-shaped cable head: 18 mm.
- Inner diameter of the coupling (drum side): 23 mm.
- Length of the outer sheath of the cable (HL): 1130 mm.
- Total cable length(GL): 1326 mm.
- Внутренний диаметр муфты (со стороны барабана): 23 мм.
- Длина внешней оболочкитроса (HL): 1130 мм.
- Общая длина троса(GL): 1326 мм.

Stock: 0 pcs.

NH-A014

Price: 24.50 €

Add to cart

View

Aizsargstienis MERCEDES - BENZ SPRINTER 18 -

BAR black color, code 818860771
Suitable for MERCEDES - BENZ SPRINTER 18 -.
Specification:
- Material: AISI304 stainless steel.
- Base tube diameter: 60 mm.
- Surface treatment: polished.
- Complete set: instructions and necessary mounting brackets for installation.
- Number of mounting points for additional headlights: 3 holes.
- Weight: 15 kg.

Stock: 0 pcs.

818860771

Price: 550.00 €

Add to cart

View

Aizsargstienis MERCEDES - BENZ SPRINTER 18 -

BAR, code 818860770
Suitable for MERCEDES - BENZ SPRINTER 18 -.
Specification:
- Material: AISI304 stainless steel.
- Base tube diameter: 60 mm.
- Surface treatment: polished.
- Complete set: instructions and necessary mounting brackets for installation.
- Number of mounting points for additional headlights: 3 holes.
- Weight: 15 kg.

Stock: 0 pcs.

818860770

Price: 550.00 €

Add to cart

View

Aizsargstienis MERCEDES BENZ SPRINTER

BAR 81885071 black color
Weight -9,00 kg.
Material - AISI304.
Pipe diameter - 60 mm.

Stock: 0 pcs.

81885071

Price: 455.00 €

Add to cart

View

Lukturu turētājs MERCEDES BENZ SPRINTER

Lamp holder, code 81885771

Diameter - 60 mm,
Material -AISI304
Surface - polished
Weight - 7.5 kg
Additional Information:
- compatible with parking sensors
- compatible with towing hook
- number of headlight attachment points - 2 fixed holders

Stock: 0 pcs.

81885770

Price: 390.00 €

Add to cart

View

Lamp holder

Roof light holder black color, with LED gauges (3 led white color and 2 amber)
-material (stainless steel)
--for high roof (H2)
-pipe diameter 60mm
-there are mounts for 2 lights
-there is a cable for 2 lights
Products are valid according to UNECE R26/R61 legislation.
- weight 6.6 kg

Stock: 0 pcs.

888495702

Price: 465.00 €

Add to cart

View

Vējsargi MITSUBISHI COLT

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH23336

Price: 38.00 €

Add to cart

View

Vējsargi HYUNDAI KONA

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH17315

Price: 45.00 €

Add to cart

View

Vējsargi HYUNDAI KONA

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH17316+

Price: 48.00 €

Add to cart

View

Papildlukturis LED BullPro OCEAN VISION 120W

1603-300284 is a premium optional light designed for use on water but can also be used on land, suitable for challenging conditions such as foggy or rainy conditions.
Technical information:
- Has a certificate: CISPR25 class 5, ADR - approved for installation on trucks.
- Input voltage: 12-48V
- Power: 120W (6 x 20W Cree)
- Power consumption: 3.70 A at 13.7 V.
- Luminous flux (theoretical/tested): 7000 lm/4890 lm.
- Wide beam of light.
- Light temperature: 4000 K.
- Operating temperature -40°С...+85°С.
- Dust and moisture protection class: IP68.
- Cable/connection: built-in DT plug.
- Built-in EMI protection.
- Overheating and short circuit protection.
- Aluminum body, glass lens, stainless steel bracket.
- Dimensions: 135(138.7)x103(126.5)x70 mm.
Weight 1.1 kg

Stock: 0 pcs.

1603-300284

Price: 151.00 €

Add to cart

View

Auto sakabes āķis MAZDA CX 60

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

M 73V

Price: 335.00 €

Add to cart

View

Auto sakabes āķis MAZDA CX 60

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

M 73A

Price: 219.00 €

Add to cart

View

Auto sakabes āķis MAZDA CX 60

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

M 73

Price: 175.00 €

Add to cart

View

Suņa transport. bagāžniekā pārvalks

Cover for the trunk of a car for transporting a dog.
This is a universal product that fits any type of car and is suitable for dogs of all breeds. This is an ideal solution that offers many benefits and makes traveling with your dog much more enjoyable without worrying about cleanliness and safety.
This cover not only protects the trunk from sand or dirt, moisture, hair or other unwanted dirt, but also keeps your dog comfortable and safe. It creates a stable surface for your dog to lie or sit on comfortably, which helps reduce your pet's stress while traveling.
Installation of the cover is simple and quick using the buckle straps, and cleaning is effortless.
The cover cover is made of durable nylon material that is easy to clean and waterproof. Additionally, the cover is reinforced with quilted material, which increases its durability.
The removable sides of the cover are also very practical, as they effectively protect the side elements of the trunk from dirt. Additionally, the cover can be pulled out to protect your vehicle's rear bumper.
The cover has three layers, including a waterproof layer at the bottom, which ensures that moisture does not get into the bottom of the trunk, and a non-slip surface, which ensures that the dog has a secure footing while traveling.
It is also equipped with convenient pockets that allow you to store various accessories and other items.
Dimensions: 184 x 103 x 33 cm

Stock: > 1 pcs.

03569

Price: 28.00 €

Add to cart

View

Stūres apvalks

Steering wheel cover, leather, 39-41 cm.

Stock: > 1 pcs.

03562

Price: 17.00 €

Add to cart

View

Stūres apvalks

Steering wheel cover, leather, XL 41-43 cm

Stock: > 1 pcs.

03558

Price: 17.00 €

Add to cart

View

Stūres apvalks

Steering wheel cover, leather, 39-41 cm.

Stock: > 1 pcs.

03557

Price: 16.00 €

Add to cart

View