All products

Paklājs bagāžniekā ALFA ROMEO TONALE

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Auto sakabes āķis NISSAN X-Trail (T33)

Towbar Swan Neck ball.
The customer always has the towbar ready for use. The tow ball can be disassembled with the help of a manual tool.

Stock: > 1 pcs.

Paklāji salonā gumijas FIAT DOBLO

MaxEdge Technology - perfect protection of high edges.
- specially folded three-dimensional high - as much as 4 cm - the edges of the No.77 car wiper have been stiffened so that they never deform. The unique design makes the rugs fit perfectly to the base walls and protects the upholstery against dirt.

Perfect match.
- our experts precisely scan the interiors of cars so that the No.77 car mat fits perfectly with a specific car model. We take into account not only the make and model of the car, but also the year.

Maintenance free They provide comfort.
- Car mats No.77 are extremely easy to clean and resistant to chemicals, they do not need any additional maintenance. Additional comfort is ensured by the neutralized chemical smell of rubber, which has been replaced by a delicate relaxing aroma of vanilla.

Safety and comfort.
- easy fixing in the form of stoppers guarantee that the No.77 car mats will not move while driving. On the other hand, the flexibility of TPE material allows easy insertion and removal of the rug.

Premium quality and unique design
- Car mats No.77 have an absolutely unique design that makes them decorate the interior of every car and add a modern touch to the interior.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original wires for towbar with 13-pin connector.
Suitable for car model:
- ALFA ROMEO TONALE, 06.2022 -

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original wires for towbar with 7-pin connector.
Suitable for car model:
- ALFA ROMEO TONALE, 06.2022 -

Stock: 0 pcs.

Engine, gearbox and radiator protection MET NISSAN QASHQAI

Stock: 0 pcs.

Tow bar MERCEDES BENZ GLC SUV (X253)/Coupé (C253)

Stock: 0 pcs.

Engine, gearbox and radiator protection MET NISSAN X-TRAIL T33

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Trunk crossbars Thule (1 pc. in the package)
Premium aerodynamic crossbars for an extremely quiet ride and easy attachment of accessories
-length: (cm) 104
- maximum load: 75 kg.
Please also check the maximum roof capacity of your vehicle.
Equipped with T-track: Yes

Stock: 0 pcs.

Auto sakabes āķis TOYOTA AYGO

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
NISSAN LEAF 2014-. Not intended for towing a trailer!!! Max vertical 50kg
Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Tow bar FORD MUSTANG Mach-E

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis PEUGEOT 408

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis AUDI Q8 e-tron

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
AUDI Q8 e-tron 2018-. Not intended for towing a trailer!!! Max vertical 120kg
Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Wind deflectors SKODA ENYAQ iV Coupe

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: > 1 pcs.

Vējsargi OPEL ASTRA (L)

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Crankcase guard - front part.
material aluminum-5 mm
Comes with everything necessary for installation.

Stock: > 1 pcs.

Aizsargstienis SCANIA R

Front bar with LED for SCANIA.
- pipe diameter: 60mm.
- weight: 10 kg.
Installation time 30 min.
Instructions and necessary mounting brackets.
Does not fit the truck with protruding bumpers.

Stock: 0 pcs.

auto sakabes āķis BMW IX (I20)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

Auto sakabes āķis BMW X1 (U11)/iX 1 (U11)

Towbar Vertically detachable (T60) BMW X1 (U11)/iX 1 (U11) 2022-
-also suited for vehicles with option 'handsfree tailgate' & M Sport package

Stock: 0 pcs.

Sānu sliekšņi TOYOTA RAV 4

Side steps for TOYOTA RAV4 TOYOTA RAV4 2005-2012.
Original OEM design.
The product is made of high quality aluminum and automotive grade ABS plastic. Maximum load per side 160 kg.
The side sills are designed to increase comfort when getting in and out of the car, as well as to provide a more comfortable working position when placing cargo on the car roof.
Integrated non-slip rubber protection means the thresholds not only provide comfort, but also increase safety, which is especially important for children and the elderly.
In addition, the use of car thresholds helps to avoid splashing dirt on the doors and sides of the car.
The kit includes side sills (for the right and left side), mounting hardware and instructions.
Thresholds are installed at the factory mounting points without drilling additional holes. We recommend professional assembly in a workshop.

Stock: 0 pcs.