Choose your car model

Latest news

NEW ! Snowplow for pick-up

01.12.2023 Read more >

Towbar

01.12.2023 Read more >

All news >

ML-SERVISS

Auto accessories store
Auto service

SIA ML-SERVISS Maskavas ielas fil.

See our location on map

Address: Mazjumpravas street 66, Riga, Latvia, LV-1063

Phone: (+371) 66116670
(+371) 29212095

Email: info@mlserviss.lv

WhatsApp (+371) 29212095

SIA ML-SERVISS filiāle "Jugla"

See our location on map

Address: Brivibas gatve street 422, Riga, Latvia, LV-1024

Phone: (+371) 29522111

Email: brivibas@mlserviss.lv

All products

Category filter:

Car brand

Product Code Price Number

Product	Code	Price
Auto sakabes āķis Ford Ranger IV/Volkswagen Amarok (T1) Ford Ranger IV/Volkswagen Amarok (T1) IMPORTANT !!! The towbar kit does not contain wiring. Stock: 0 pcs.	2724	Price: 320.00 €	Add to cart View
Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308 The towbar is original, designed for a specific model. -Included is everything necessary for installation. VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used. Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident. Stock: > 1 pcs.	F 52V	Price: 387.00 €	Add to cart View
Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308 Semi-automatic towbar Mechanism with quickly demountable ending Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm. Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin. Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending. Stock: 0 pcs.	F 52A	Price: 249.00 €	Add to cart View
Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308 The towbar is original, designed for a specific model. -Included is everything necessary for installation. Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included. Stock: > 1 pcs.	F 52	Price: 189.00 €	Add to cart View
Paklājs bagāžniekā SSANGYONG TIVOLI Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232815	Price: 59.00 €	Add to cart View
Paklāji salonā gumijas CITROEN C5 X, PEUGEOT 408 Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo. Stock: > 1 pcs.	RP201242	Price: 53.00 €	Add to cart View
Paklāji salonā gumijas CITROEN C4 X Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo. Stock: > 1 pcs.	RP201241	Price: 50.00 €	Add to cart View
Paklājs bagāžniekā SSANGYONG TIVOLI Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232816	Price: 46.00 €	Add to cart View
Paklājs bagāžniekā MAZDA CX60 Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232243	Price: 50.00 €	Add to cart View
Paklājs bagāžniekā MAZDA CX 5 Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232242	Price: 50.00 €	Add to cart View
Paklājs bagāžniekā BMW 3(G21) Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232168	Price: 53.00 €	Add to cart View
Paklājs bagāžniekā ALFA ROMEO TONALE Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BPR232411	Price: 46.00 €	Add to cart View
Paklājs bagāžniekā MAZDA CX-60 Trunk mat - especial made mat for each model using 3D floor scan technology. - It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BP102243R	Price: 43.00 €	Add to cart View
Paklājs bagāžniekā KIA NIRO/E-NIRO Trunk mat - especial made mat for each model using 3D floor scan technology. - It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BP100772R	Price: 41.00 €	Add to cart View
Tow bar Mercedes A-Klasa (W176) AMG VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used. Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident. Stock: 0 pcs.	STM178	Price: 400.00 €	Add to cart View
Piekabe Trailer PP75-5916 is a trailer for transporting boats and motor boats with a load capacity of up to 750 kg. Thanks to its low dead weight, it can be towed by all passenger cars. Loadable weight up to 750 kg and length up to 5 meters. The trailer is made of welded steel. Metal elements are galvanized by the method, due to which the steel has a protective layer that protects it from corrosion and mechanical damage. The trailer uses two types of side supports - single and double - equipped with durable rollers. The position of the supports is adjustable both in height and inclination. The trailer is equipped with lights that retract during loading and unloading. The trailer can be fully submerged because it is equipped with waterproof lights. The trailer hubs are also sealed (watertight system) and protect the bearings from water. This extends the life of bearings, hubs and axles. This model is equipped as standard with holders that allow you to securely and confidently fix the load with straps. The trailer can be equipped with additional 4 holders, which will allow you to hook the boat even better and more efficiently on each side. Equipment: • Gross weight 750 kg • Net weight 193 kg • Load capacity 557 kg • Maximum loading length 5000 mm • Maximum loading width 1170 mm • External dimensions 1574 x 5877 x 1271 mm • Support wheel • Manual winch • Waterproof lights • One axis • Wheel size R13 Stock: > 1 pcs.	PP75-5916	Price: 1568.00 €	Add to cart View
Piekabe MT-2 trailer for two motorbikes. The dedicated single-axle trailer for the transport of two motorbikes with a loading capacity of 750 kg is the ideal means of transporting singletrack. The MT-2 is a modern motorcycle trailer made in a fashionable, simple design for transporting 2 motorbikes. The trailer is made entirely of steel, and the frame of the trailer is protected against corrosion with a layer of zinc, which also strengthens it against mechanical damage. In addition, it is powder-coated in black, giving it an elegant and classic look to match any single track. The chassis structure and drawbar are made of a closed steel profile. The frame of the trailer is further reinforced using transverse welded brackets. This guarantees the stability and reliability of the entire structure. The motorbike trailer for two motorcycles is equipped with a convenient-to-use mechanism for raising and lowering the platform. This makes it easy to bring motorbikes in or out of the trailer. The MT-2 is constructed with two movable frames so that it can be easily folded in half. The folded trailer can be stored both vertically and horizontally. This allows it to be stored when not in use. In this way, it will take up much less space in the garage or car park, for example. When folded in half, the trailer has a height of 2574 mm. The technical solutions used in the motorcycle trailer are protected by a global patent. The trailer for two motorbikes has a jockey wheel and LED lighting as standard. The trailer is coated in black. The floor of the trailer is lined with corrugated aluminum sheets and numerous holders for transport belts (4 per side and through the center of the platform). The trailer can be additionally equipped with a spare wheel, alloy wheels, anti-theft protection, and a wind deflector or railing limiting the overrun. The use of a front railing turns the MT-2 into a trailer for transporting quads. In addition, the trailer can be optionally equipped with a dedicated two-bike carrier or cross-bike stand. The MT-2 trailer is designed in such a way that 3 racks can easily be placed on it at the same time, making it a trailer for 3 cross bikes. Technical data and specifications: - Full weight 750 kg - Net weight 249 kg - Load capacity 501 kg - Maximum length of loading surface 2396 kg - Maximum loading surface width 1743 mm - External dimensions (width x length x height): 2396 x 3491 x 962 mm - One axle - Axles without brakes - Spare wheel - Wheel type R13 Stock: > 1 pcs.	MT-2/LED STAL	Price: 2970.00 €	Add to cart View
Piekabe Trailer MT-1. A light and easy-to-use motorcycle trailer is a perfect solution for all lovers of two-wheelers. It allows the safe transportation of modern, classic, and sports motorcycles. A dedicated single-axle trailer for transporting motorcycles with a loading capacity of up to 750 kg is an ideal means of transporting the two-wheelers. Its structure is settled on a stable frame, additionally supported by transverse reinforcements, to which a tow bar is welded. The trailer frame has been protected against corrosion by a hot-dip galvanizing process with passivation, which strengthens it against mechanical damage. In addition, it is powder-coated in black to give it an elegant and modern look. The MT-1 trailer is equipped with a convenient-to-use mechanism for raising and lowering the platform. We have included a wheel mount in the front of the motorbike trailer, which allows stable positioning of the vehicle. When designing the trailer for transporting motorcycles, we also considered the convenience of its storage. Because the trailer is made of two movable parts (HALF-FOLD system), it can be easily folded in half, which will make it easier to store the trailer when is not used. Thus, it will take up much less space in the garage. The trailer folded in half has the following dimensions: 2325 x 1710 x 650 mm. The technical solutions used in the motorcycle trailer are protected by a global patent. The MT-1 motorbike trailer has a support wheel and LED lighting as standard. Its floor is made of corrugated aluminium sheets. The trailer has numerous holders for attaching transport belts and a wheel-locking wedge. In addition, it can be retrofitted with alloy wheels, shock absorbers with mounts, a spare wheel with mounts, a bike carrier, or a special stand dedicated to the transport of cross bikes. Technical data and specifications: - Full weight 750 kg - Net weight 170 kg - Load capacity 580 kg - Maximum length of loading surface 2386 mm - Maximum loading surface width 1040 mm - External dimensions (width x length x height): 1710 x 3228 x 956 mm - One axle - Axles without brakes - Spare wheel - Wheel type R13 Stock: > 1 pcs.	MT-1/LED STAL	Price: 2250.00 €	Add to cart View
Piekabe Trailer PLI35-5521. It is a safe and proven means to transport the car to any place. With integrated overrun gangways, the transported vehicle can easily enter or go down. It is suitable for both personal (individual) and fully professional use (car workshops, roadside assistance). It is the largest car carrier with a loading capacity of 3,500 kg. The vehicle has a tilting platform with integrated overrun gangways that make up an approach angle of 11°. Overrun gangways with ramps are made of perforated and pressed sheets of the 'LOHR” type. The model is equipped with the LIGHT SIDE system, which is responsible for tilting the rear lamps, which protects them from possible damage when entering or going down the car. The overrun frame tilts by gravity. The frame and body of the model are fully welded, which affects their strength and guarantees the reliability of the vehicle. The structure is protected by hot galvanizing, with which the steel receives a protective layer that strengthens it against mechanical damage and corrosion. The tilting ramp and drawbar of the car carrier are made of hollow sections, which gives rigidity and stability to the entire car carrier and affects its long life and trouble-free operation. The PL35-5521 car carrier has a loading capacity of 3500 kg, therefore its load capacity enables transporting goods weighing up to 2701 kilograms having a length of up to 5.5 and a width of up to 2.01 meters. The car carrier is equipped with 2 braked axles. The tilting ramp is equipped with shock absorbers that facilitate loading and unloading the vehicle. Optionally, the car carrier can be equipped with a one- or two-way hydraulic pump. The trailer, as standard, includes a support wheel, manual 1135 kg winch, wedges for blocking trailer wheels as well as overrun and parking brakes. Optionally, it can also be equipped with floor fillings made of riffled aluminum plate or anti-slip plywood, shock absorbers for axles, an electric winch, a hydraulic pump, and wheel locks for the transported vehicle. Technical data and specifications: - Full weight 3500 kg - Net weight 799 kg - Load capacity 2701 kg - Maximum length of loading surface 5858 mm - Maximum width of loading surface 2160 mm - External dimensions (width x length x height): 2160 x 7314 x 664 mm - Wedges for locking trailer wheels - Manual 1135 kg winch - Shock absorbers - Number of axles: 2 - Axles with brakes - Wheel type R13 - Angle of approach 11° degrees Stock: 0 pcs.	PLI35-5521	Price: 6950.00 €	Add to cart View
Piekabe Trailer PB75-2614/2 is a two-axle, lightweight trailer without brakes, with a load capacity of up to 750 kg. It features an innovative hinge release system that allows all sides and posts to be easily removed, ensuring a completely flat platform. The trailer frame is very rigid. The trailer sides are 35 cm high. They are made of galvanized sheet metal, which guarantees their high strength and resistance to corrosion. The standard PB75-2614 is equipped with a safe, waterproof and non-slip floor, as well as a durable support wheel. Specifications: • Gross vehicle weight 750 kg. • Complete kerb weight 257 kg. • Load capacity 493 kg. • Support wheel. • Maximum length of the loading surface 2609 mm. • Maximum width of the loading surface 1384 mm. • Waterproof and non-slip plywood flooring. • Fastenings for securing cargo installed in the trailer frame. • Loading surface height 35 cm. • Wheel size R13. The trailer can be additionally equipped with: • Tent - TENT-PB75-2614/1/2. • Spare wheel. Stock: > 1 pcs.	PB75-2614/2	Price: 1680.00 €	Add to cart View

Auto sakabes āķis Ford Ranger IV/Volkswagen Amarok (T1)

Ford Ranger IV/Volkswagen Amarok (T1)
IMPORTANT !!! The towbar kit does not contain wiring.

Stock: 0 pcs.

2724

Price: 320.00 €

Add to cart

View

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

F 52V

Price: 387.00 €

Add to cart

View

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

F 52A

Price: 249.00 €

Add to cart

View

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

F 52

Price: 189.00 €

Add to cart

View

Paklājs bagāžniekā SSANGYONG TIVOLI

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

BPR232815

Price: 59.00 €

Add to cart

View

Paklāji salonā gumijas CITROEN C5 X, PEUGEOT 408

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

RP201242

Price: 53.00 €

Add to cart

View

Paklāji salonā gumijas CITROEN C4 X

Stock: > 1 pcs.

RP201241

Price: 50.00 €

Add to cart

View

Paklājs bagāžniekā SSANGYONG TIVOLI

Stock: 0 pcs.

BPR232816

Price: 46.00 €

Add to cart

View

Paklājs bagāžniekā MAZDA CX60

Stock: 0 pcs.

BPR232243

Price: 50.00 €

Add to cart

View

Paklājs bagāžniekā MAZDA CX 5

Stock: 0 pcs.

BPR232242

Price: 50.00 €

Add to cart

View

Paklājs bagāžniekā BMW 3(G21)

Stock: 0 pcs.

BPR232168

Price: 53.00 €

Add to cart

View

Paklājs bagāžniekā ALFA ROMEO TONALE

Stock: 0 pcs.

BPR232411

Price: 46.00 €

Add to cart

View

Paklājs bagāžniekā MAZDA CX-60

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

BP102243R

Price: 43.00 €

Add to cart

View

Paklājs bagāžniekā KIA NIRO/E-NIRO

Stock: 0 pcs.

BP100772R

Price: 41.00 €

Add to cart

View

Tow bar Mercedes A-Klasa (W176) AMG

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

STM178

Price: 400.00 €

Add to cart

View

Piekabe

Trailer PP75-5916 is a trailer for transporting boats and motor boats with a load capacity of up to 750 kg. Thanks to its low dead weight, it can be towed by all passenger cars. Loadable weight up to 750 kg and length up to 5 meters. The trailer is made of welded steel. Metal elements are galvanized by the method, due to which the steel has a protective layer that protects it from corrosion and mechanical damage. The trailer uses two types of side supports - single and double - equipped with durable rollers. The position of the supports is adjustable both in height and inclination. The trailer is equipped with lights that retract during loading and unloading. The trailer can be fully submerged because it is equipped with waterproof lights. The trailer hubs are also sealed (watertight system) and protect the bearings from water. This extends the life of bearings, hubs and axles. This model is equipped as standard with holders that allow you to securely and confidently fix the load with straps. The trailer can be equipped with additional 4 holders, which will allow you to hook the boat even better and more efficiently on each side.

Equipment:
• Gross weight 750 kg
• Net weight 193 kg
• Load capacity 557 kg
• Maximum loading length 5000 mm
• Maximum loading width 1170 mm
• External dimensions 1574 x 5877 x 1271 mm
• Support wheel
• Manual winch
• Waterproof lights
• One axis
• Wheel size R13

Stock: > 1 pcs.

PP75-5916

Price: 1568.00 €

Add to cart

View

Piekabe

MT-2 trailer for two motorbikes. The dedicated single-axle trailer for the transport of two motorbikes with a loading capacity of 750 kg is the ideal means of transporting singletrack. The MT-2 is a modern motorcycle trailer made in a fashionable, simple design for transporting 2 motorbikes. The trailer is made entirely of steel, and the frame of the trailer is protected against corrosion with a layer of zinc, which also strengthens it against mechanical damage. In addition, it is powder-coated in black, giving it an elegant and classic look to match any single track. The chassis structure and drawbar are made of a closed steel profile. The frame of the trailer is further reinforced using transverse welded brackets. This guarantees the stability and reliability of the entire structure.

The motorbike trailer for two motorcycles is equipped with a convenient-to-use mechanism for raising and lowering the platform. This makes it easy to bring motorbikes in or out of the trailer.
The MT-2 is constructed with two movable frames so that it can be easily folded in half. The folded trailer can be stored both vertically and horizontally. This allows it to be stored when not in use. In this way, it will take up much less space in the garage or car park, for example. When folded in half, the trailer has a height of 2574 mm. The technical solutions used in the motorcycle trailer are protected by a global patent.

The trailer for two motorbikes has a jockey wheel and LED lighting as standard. The trailer is coated in black. The floor of the trailer is lined with corrugated aluminum sheets and numerous holders for transport belts (4 per side and through the center of the platform). The trailer can be additionally equipped with a spare wheel, alloy wheels, anti-theft protection, and a wind deflector or railing limiting the overrun. The use of a front railing turns the MT-2 into a trailer for transporting quads. In addition, the trailer can be optionally equipped with a dedicated two-bike carrier or cross-bike stand. The MT-2 trailer is designed in such a way that 3 racks can easily be placed on it at the same time, making it a trailer for 3 cross bikes.
Technical data and specifications:
- Full weight 750 kg
- Net weight 249 kg
- Load capacity 501 kg
- Maximum length of loading surface 2396 kg
- Maximum loading surface width 1743 mm
- External dimensions (width x length x height): 2396 x 3491 x 962 mm
- One axle
- Axles without brakes
- Spare wheel
- Wheel type R13

Stock: > 1 pcs.

MT-2/LED STAL

Price: 2970.00 €

Add to cart

View

Piekabe

Trailer MT-1. A light and easy-to-use motorcycle trailer is a perfect solution for all lovers of two-wheelers. It allows the safe transportation of modern, classic, and sports motorcycles. A dedicated single-axle trailer for transporting motorcycles with a loading capacity of up to 750 kg is an ideal means of transporting the two-wheelers. Its structure is settled on a stable frame, additionally supported by transverse reinforcements, to which a tow bar is welded. The trailer frame has been protected against corrosion by a hot-dip galvanizing process with passivation, which strengthens it against mechanical damage. In addition, it is powder-coated in black to give it an elegant and modern look.

The MT-1 trailer is equipped with a convenient-to-use mechanism for raising and lowering the platform. We have included a wheel mount in the front of the motorbike trailer, which allows stable positioning of the vehicle. When designing the trailer for transporting motorcycles, we also considered the convenience of its storage. Because the trailer is made of two movable parts (HALF-FOLD system), it can be easily folded in half, which will make it easier to store the trailer when is not used. Thus, it will take up much less space in the garage. The trailer folded in half has the following dimensions: 2325 x 1710 x 650 mm. The technical solutions used in the motorcycle trailer are protected by a global patent.

The MT-1 motorbike trailer has a support wheel and LED lighting as standard. Its floor is made of corrugated aluminium sheets. The trailer has numerous holders for attaching transport belts and a wheel-locking wedge. In addition, it can be retrofitted with alloy wheels, shock absorbers with mounts, a spare wheel with mounts, a bike carrier, or a special stand dedicated to the transport of cross bikes.

Technical data and specifications:
- Full weight 750 kg
- Net weight 170 kg
- Load capacity 580 kg
- Maximum length of loading surface 2386 mm
- Maximum loading surface width 1040 mm
- External dimensions (width x length x height): 1710 x 3228 x 956 mm
- One axle
- Axles without brakes
- Spare wheel
- Wheel type R13

Stock: > 1 pcs.

MT-1/LED STAL

Price: 2250.00 €

Add to cart

View

Piekabe

Trailer PLI35-5521. It is a safe and proven means to transport the car to any place. With integrated overrun gangways, the transported vehicle can easily enter or go down. It is suitable for both personal (individual) and fully professional use (car workshops, roadside assistance). It is the largest car carrier with a loading capacity of 3,500 kg. The vehicle has a tilting platform with integrated overrun gangways that make up an approach angle of 11°. Overrun gangways with ramps are made of perforated and pressed sheets of the 'LOHR” type. The model is equipped with the LIGHT SIDE system, which is responsible for tilting the rear lamps, which protects them from possible damage when entering or going down the car. The overrun frame tilts by gravity.

The frame and body of the model are fully welded, which affects their strength and guarantees the reliability of the vehicle. The structure is protected by hot galvanizing, with which the steel receives a protective layer that strengthens it against mechanical damage and corrosion. The tilting ramp and drawbar of the car carrier are made of hollow sections, which gives rigidity and stability to the entire car carrier and affects its long life and trouble-free operation. The PL35-5521 car carrier has a loading capacity of 3500 kg, therefore its load capacity enables transporting goods weighing up to 2701 kilograms having a length of up to 5.5 and a width of up to 2.01 meters. The car carrier is equipped with 2 braked axles. The tilting ramp is equipped with shock absorbers that facilitate loading and unloading the vehicle. Optionally, the car carrier can be equipped with a one- or two-way hydraulic pump. The trailer, as standard, includes a support wheel, manual 1135 kg winch, wedges for blocking trailer wheels as well as overrun and parking brakes. Optionally, it can also be equipped with floor fillings made of riffled aluminum plate or anti-slip plywood, shock absorbers for axles, an electric winch, a hydraulic pump, and wheel locks for the transported vehicle.

Technical data and specifications:
- Full weight 3500 kg
- Net weight 799 kg
- Load capacity 2701 kg
- Maximum length of loading surface 5858 mm
- Maximum width of loading surface 2160 mm
- External dimensions (width x length x height): 2160 x 7314 x 664 mm
- Wedges for locking trailer wheels
- Manual 1135 kg winch
- Shock absorbers
- Number of axles: 2
- Axles with brakes
- Wheel type R13
- Angle of approach 11° degrees

Stock: 0 pcs.

PLI35-5521

Price: 6950.00 €

Add to cart

View

Piekabe

Trailer PB75-2614/2 is a two-axle, lightweight trailer without brakes, with a load capacity of up to 750 kg. It features an innovative hinge release system that allows all sides and posts to be easily removed, ensuring a completely flat platform. The trailer frame is very rigid. The trailer sides are 35 cm high. They are made of galvanized sheet metal, which guarantees their high strength and resistance to corrosion. The standard PB75-2614 is equipped with a safe, waterproof and non-slip floor, as well as a durable support wheel.

Specifications:
• Gross vehicle weight 750 kg.
• Complete kerb weight 257 kg.
• Load capacity 493 kg.
• Support wheel.
• Maximum length of the loading surface 2609 mm.
• Maximum width of the loading surface 1384 mm.
• Waterproof and non-slip plywood flooring.
• Fastenings for securing cargo installed in the trailer frame.
• Loading surface height 35 cm.
• Wheel size R13.

The trailer can be additionally equipped with:
• Tent - TENT-PB75-2614/1/2.
• Spare wheel.

Stock: > 1 pcs.

PB75-2614/2

Price: 1680.00 €

Add to cart

View

Choose your car model

Car brand:

Car model:

Latest news

NEW ! Snowplow for pick-up

Towbar

ML-SERVISS

All products

Auto sakabes āķis Ford Ranger IV/Volkswagen Amarok (T1)

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

Auto sakabes āķis OPEL ASTRA (L)/PEUGEOT 308

Paklājs bagāžniekā SSANGYONG TIVOLI

Paklāji salonā gumijas CITROEN C5 X, PEUGEOT 408

Paklāji salonā gumijas CITROEN C4 X

Paklājs bagāžniekā SSANGYONG TIVOLI

Paklājs bagāžniekā MAZDA CX60

Paklājs bagāžniekā MAZDA CX 5

Paklājs bagāžniekā BMW 3(G21)

Paklājs bagāžniekā ALFA ROMEO TONALE

Paklājs bagāžniekā MAZDA CX-60

Paklājs bagāžniekā KIA NIRO/E-NIRO

Tow bar Mercedes A-Klasa (W176) AMG

Piekabe

Piekabe

Piekabe

Piekabe

Piekabe

Categories

Categories

Car accessories

Information

Contact Us