Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
Car mats model Perfect Fit 3D ProLine. Made in the EU. UltraFlex thermoplastic two-polymer technology – long-lasting durability. - has a unique composition of materials with very high wear resistance even in extreme conditions. Remains flexible from -50 to +110 ° C. Modern car floor mats ProLine are also resistant to chemicals, ultraviolet radiation and wear.
ProLine floor mats have high edges of up to 7 cm, which prevent dirt from spreading around the cabin. They are reinforced (MaxEdge technology) so as not to deform. As a result, your car is always protected from unwanted dirt.
Perfect class - perfect fit. Thanks to 3D laser scanning, they are ideal for a specific car model.
ProLine car mats do not emit an unpleasant smell and have a delicate vanilla aroma, do not contain harmful substances. They are easy to wash.
Driving safety. Excellent comfort. - Fastening system - with fasteners in the original places, so that the mats are stable.
Additional mirror CC42757, which is attached to the car's factory mirror. This allows you to see a larger area and further behind the vehicle. Can be used in driving lessons. Mirror dimensions: 6 cm x 15 cm x 5 cm. set - one piece.
Hydraulic support jack, 10 t. Characteristics and technical parameters: - Maximum load capacity: up to 10,000 kg. - Lift height: approx. 200 - 385 mm. - Durable construction. - Precise height adjustment thanks to screw-down pin. - Soft lowering with release valve. - Lifting rod, consisting of two parts - takes up little space when folded. - Safety valve to prevent overload. - Has a CE certificate. - Base dimensions: 125 x 125 mm. - Drawbar length: 400 mm.
Electric winch K14000XP-SR-12V with synthetic rope and wireless control. This is a reliable winch with excellent performance at an attractive price. The XP series Kangaroowinch winch has an attractive design, low power consumption, high speed and quiet operation that will satisfy even the most demanding user. The XP series from Kangaroowinch, in comparison with other winches, differs primarily in the high speed of winding the cable - the speed of lifting the cable without load is 9.3 m / min, and with a full load of 1.3 m / min. XP series winches feature a 3-speed planetary gear, lift and slew clutch levers, heavy duty rods and a 500 amp waterproof relay with silver contactors. Specification: - Thrust: 6300 kg (14000 pounds) - Engine: 7.0 HP / 5.2 kW M - 3-speed planetary gearbox - Gear ratio: 218:1 - Voltage 12V - Union connection 90°. - Synthetic rope: 9.5 mm x 26 m. - Aluminum sliding guide. - Dimensions: 560 x 160 x 187 mm - Drum dimensions 64 x 224 mm - Distance between fixing bolts: 254mm x 114.3mm - Winding speed / energy consumption: 1.3 m / min / 380 A - Wired and wireless remote control. - Weight 28 kg The winch comes with: - Synthetic rope 9.5 mm x 26 m - Hook with manual latch. - Sliding guide. - Relay control unit. - Wiring kit. - Wireless control with cord and carabiner. - Wired remote control. - Mounting bolts. - User guide. - Written guarantee.
Electric winch K8000XP-SR -12V with synthetic rope and wireless control. This is a reliable winch with excellent performance at an attractive price. The XP series Kangaroowinch winch has an attractive design, low power consumption, high speed and quiet operation that will satisfy even the most demanding user. The XP series from Kangaroowinch, compared to other winches, differs primarily in the speed of winding the cable - the speed of lifting the cable without load is 18 m / min, and with a full load of 2.6 m / min. XP series winches feature a 3-speed planetary gear, lift and slew clutch levers, heavy duty rods and a 500 amp waterproof relay with silver contactors. Specification: - Thrust: 3633 kg (8000 pounds) - Engine: 6.0 HP / 4.5 kW M - 3-speed planetary gearbox - Gear ratio: 126:1 - Voltage 12V - Union connection 90°. - Synthetic rope: 8.5 mm x 26 m. - Aluminum sliding guide. - Dimensions: 540 x 165 x 187 mm - Drum dimensions 64 x 224 mm - Distance between fixing bolts: 254mm x 114.3mm - Winding speed / energy consumption: 2.6 m / min / 340 A - Wired and wireless remote control. - Weight 27 kg The winch comes with: - Synthetic rope 8.5 mm x 26 m - Hook with manual latch. - Sliding guide. - Relay control unit. - Wiring kit. - Wireless control with cord and carabiner. - Wired remote control. - Mounting bolts. - User guide. - Written guarantee.
Electric winch K7000XP-SR -12V with synthetic rope and wireless control. This is a reliable winch with excellent performance at an attractive price. The XP series Kangaroowinch winch has an attractive design, low power consumption, high speed and quiet operation that will satisfy even the most demanding user. The XP series from Kangaroowinch, compared to other winches, differs primarily in the speed of winding the cable - the speed of lifting the cable without load is 20 m / min, and with a full load of 2.9 m / min. XP series winches feature a 3-speed planetary gear, lift and slew clutch levers, heavy duty rods and a 500 amp waterproof relay with silver contactors. Specification: - Thrust: 3179 kg (7000 pounds) - Engine: 6.0 HP / 4.5 kW M - 3-speed planetary gearbox - Gear ratio: 104:1 - Voltage 12V - Union connection 90°. - Synthetic rope: 8.5 mm x 26 m. - Aluminum sliding guide. - Dimensions: 540 x 165 x 187 mm - Drum dimensions 64 x 224 mm - Distance between fixing bolts: 254mm x 114.3mm - Winding speed / energy consumption: 2.9 m / min / 335 A - Wired and wireless remote control. - Weight 27 kg The winch comes with: - Synthetic rope 8.5 mm x 26 m - Hook with manual latch. - Sliding guide. - Relay control unit. - Wiring kit. - Wireless control with cord and carabiner. - Wired remote control. - Mounting bolts. - User guide. - Written guarantee.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Semi-automatic towbar Mechanism with quickly demountable ending
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Body assembly method: 1. Attach the machine body to the drawbar beam using M12x25mm bolts as shown in the illustration. Hook installation: 1. To secure the ball, pull the lever down until it stops. 2. Insert the ball into the body so that the pins on the ball fit into the seats in the body. 3. Release the lever. It should return to its original position, which means that the hook mechanism is correctly locked into the body. 4. Insert the cotter pin through the hole in the lever and the hole in the hook shackle.
Car mats model Perfect Fit 3D ProLine. Made in the EU. UltraFlex thermoplastic two-polymer technology – long-lasting durability. - has a unique composition of materials with very high wear resistance even in extreme conditions. Remains flexible from -50 to +110 ° C. Modern car floor mats ProLine are also resistant to chemicals, ultraviolet radiation and wear.
ProLine floor mats have high edges of up to 7 cm, which prevent dirt from spreading around the cabin. They are reinforced (MaxEdge technology) so as not to deform. As a result, your car is always protected from unwanted dirt.
Perfect class - perfect fit. Thanks to 3D laser scanning, they are ideal for a specific car model.
ProLine car mats do not emit an unpleasant smell and have a delicate vanilla aroma, do not contain harmful substances. They are easy to wash.
Driving safety. Excellent comfort. - Fastening system - with fasteners in the original places, so that the mats are stable.
Car mats model Perfect Fit 3D ProLine. Made in the EU. UltraFlex thermoplastic two-polymer technology – long-lasting durability. - has a unique composition of materials with very high wear resistance even in extreme conditions. Remains flexible from -50 to +110 ° C. Modern car floor mats ProLine are also resistant to chemicals, ultraviolet radiation and wear.
ProLine floor mats have high edges of up to 7 cm, which prevent dirt from spreading around the cabin. They are reinforced (MaxEdge technology) so as not to deform. As a result, your car is always protected from unwanted dirt.
Perfect class - perfect fit. Thanks to 3D laser scanning, they are ideal for a specific car model.
ProLine car mats do not emit an unpleasant smell and have a delicate vanilla aroma, do not contain harmful substances. They are easy to wash.
Driving safety. Excellent comfort. - Fastening system - with fasteners in the original places, so that the mats are stable.
Car mats model Perfect Fit 3D ProLine. Made in the EU. UltraFlex thermoplastic two-polymer technology – long-lasting durability. - has a unique composition of materials with very high wear resistance even in extreme conditions. Remains flexible from -50 to +110 ° C. Modern car floor mats ProLine are also resistant to chemicals, ultraviolet radiation and wear.
ProLine floor mats have high edges of up to 7 cm, which prevent dirt from spreading around the cabin. They are reinforced (MaxEdge technology) so as not to deform. As a result, your car is always protected from unwanted dirt.
Perfect class - perfect fit. Thanks to 3D laser scanning, they are ideal for a specific car model.
ProLine car mats do not emit an unpleasant smell and have a delicate vanilla aroma, do not contain harmful substances. They are easy to wash.
Driving safety. Excellent comfort. - Fastening system - with fasteners in the original places, so that the mats are stable.
Aizmugures bampera uzlika MERCEDES BENZ C-klasse (W204)
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
