Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību. Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē. Lasīt vairāk

Choose your car model

Car brand:
Car model:

Latest news

Bike carrier

06.05.2026 Read more >

 
towbars

05.05.2026 Read more >

 

All news >

ML-SERVISS

SIA ML-SERVISS Maskavas ielas fil.


See our location on map

Address: Mazjumpravas street 66, Riga, Latvia, LV-1063

Phone: (+371) 66116670
            (+371) 29212095

Email: info@mlserviss.lv

WhatsApp (+371) 29212095

SIA ML-SERVISS filiāle "Jugla"

See our location on map

Address: Brivibas gatve street 422, Riga, Latvia, LV-1024

Phone: (+371) 29522111
           
Email: brivibas@mlserviss.lv

All products

Order by:
 
 
Category filter:
Car brand
Product Code Price Number
Wire insulation

Wire insulation
WTJ-10JKC
10 x 0.5 PCV, black.
The price is for 1 m.

Stock: > 1 pcs.

1090-01631-1

Price: 1.20 €

Add to cart

View

Riteņa atslēga

Wheel lug wrench 17/19/21/23 mm.
Fits the most common wheel nut sizes 17/19mm and 21/23mm. The telescopic wheel wrench has a standard length of 340 mm and can be extended to 535 mm.
The key has a soft plastic handle for a comfortable grip.

Stock: > 1 pcs.

0678013

Price: 12.00 €

Add to cart

View

Suņu tīkls

Dog net.
The mesh provides safety while driving, protecting you and your dog while driving.
Your dog cannot suddenly jump forward, even if an unexpected maneuver occurs.
Mesh size 130x87 cm.
The mesh cell size is 30x30mm.
The dog net is easy to attach using loops inside the car.
Can also be used to prevent loose loads from sliding forward.

Stock: > 1 pcs.

0934501

Price: 8.00 €

Add to cart

View

Saulessarga pagarinātājs

Sun visor extension, 2 in 1.
The sun visor extension ensures that the driver will no longer be bothered by annoying sunlight or poor visibility in the dark. It prevents sunlight glare and provides better visibility in bad weather and in the dark.
The dark part of the sun visor extension is used during the day and blocks out bright sunlight, ideal for driving in bright sunshine.
The yellow sun visor extension has the same effect as night vision goggles and provides better visibility, especially in bad weather and in the dark.
The sun visor extension is easy to attach to your existing sun visor and adjustable in several ways.
Can be used by both driver and passenger.
Dimensions 18x32x6.5 cm.

Stock: > 1 pcs.

0510113

Price: 10.00 €

Add to cart

View

Bremžu trose

Cable- 110cm.

Stock: > 1 pcs.

0438110

Price: 9.00 €

Add to cart

View

Auto sakabes āķis NISSAN Navara

Towbar Swan Neck ball
The customer always has the towbar ready for use. The tow ball can be disassembled with the help of a manual tool.

Stock: 0 pcs.

E4404EC

Price: 340.00 €

Add to cart

View

Atbalsta stienis

Trailer fixed support.
Description:
- diameter - 48 mm
- length - 700 mm
- material - metal, galvanized

Stock: > 1 pcs.

0410207

Price: 18.00 €

Add to cart

View

Piekabes rezerves ritenis

Trailer spare wheel with fastening mechanism - R13' 4x100.
Designed for MT-1 motorcycle trailer.

Stock: 0 pcs.

LAK-AZ-FOP-00001

Price: 172.00 €

Add to cart

View

Piekabes rezerves ritenis

Trailer spare wheel with fastening mechanism - R13' 4x100.
Designed for MT-2 motorcycle trailer.

Stock: 0 pcs.

LAK-AZ-FOP-00002

Price: 172.00 €

Add to cart

View

Instrumentu komplekts

RT2006 - Tool kit 94 elements 1/2' and 1/4'

Stock: > 1 pcs.

RT2006

Price: 24.00 €

Add to cart

View

Instrumentu komplekts

RT2005 - Tool kit 12 elements 1/2'

Stock: > 1 pcs.

RT2005

Price: 14.00 €

Add to cart

View

Uzgriežņu atslēgu komplekts

Set of socket wrenches 1/2, 3/8, 1/4 inches, code RT2020.
The set contains 216 pcs. tools - heads, nozzles, wrenches.
Stored in a durable plastic case.
Weight – 10.33 kg.

Stock: > 1 pcs.

RT2020

Price: 135.00 €

Add to cart

View

Uzgriežņu atslēgu komplekts

Socket wrench set 1/2' 3/8' 1/4' code RT2018.
The set contains 150 pcs tools – heads, wrenches.
Stored in a durable plastic case.
Weight – 10.94 kg.

Stock: > 1 pcs.

RT2018

Price: 115.00 €

Add to cart

View

Uzgriežņu atslēgu komplekts

Socket wrench set 1/2' 1/4' code RT2017.
The set contains 131 pcs tools – heads, wrenches, tools.
Stored in a durable plastic case.
Weight – 10.68 kg.

Stock: > 1 pcs.

RT2017

Price: 98.00 €

Add to cart

View

Uzgriežņu atslēgu komplekts

Socket wrench set 1/2' 1/4' code RT2014.
Set contains 82 pieces. tools - heads and keys.
Stored in a durable plastic case.
Weight – 5.56 kg.

Stock: > 1 pcs.

RT2014

Price: 48.00 €

Add to cart

View

Auto sakabes āķis MERCEDES BENZ E-klasse (W214)

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

D 64V

Price: 389.00 €

Add to cart

View

Auto sakabes āķis MERCEDES BENZ E-klasse (W214)

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Sorry
Image not available

D 64A

Price: 259.00 €

Add to cart

View

Auto sakabes āķis MERCEDES BENZ E-klasse (W214)

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Sorry
Image not available

D 64

Price: 225.00 €

Add to cart

View

Uzgriežņu atslēgu komplekts

Set of socket wrenches 1/2' 1/4', code RT2015.
The set consists of 108 tools - heads, attachments and extensions.
Tools with ergonomic handles.
Stored in a durable plastic case.
Weight – 6.39 kg.

Stock: > 1 pcs.

RT2015

Price: 52.00 €

Add to cart

View

Auto sakabes āķis DONGFENG FORTHING U-Tour

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

DF 01V

Price: 389.00 €

Add to cart

View