Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Semi-automatic towbar Mechanism with quickly demountable ending
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Semi-automatic towbar Mechanism with quickly demountable ending
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Textile car mats Horizon HR466227. For car models: - FORD FIESTA V , 2005-2008 (post-facelift). - FORD FUSION 2005-2012, minivan(post-facelift). An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466210. For car model:FORD B-Max, minivan, 2012-2017 An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466784. For car model:FIAT TIPO, hatchback, 2015 - An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR475397. For car models: - FIAT SEDICI, 2005-2014. - SUZUKI SX4 2006-2014 An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466760. For car model: FIAT Panda III,hatchback , Hybrid, 2020 - An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466777. For car model: FIAT 600e, 2023 - An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466753. For car model: FIAT 500X,crossover, post-facelift, 2018-2024. An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Textile car mats Horizon HR466746. For car model: FIAT 500L, minivan, post-facelift, 2012-2022 An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Original wires for towbar with 13-pin connector. Suitable for car models: - TOYOTA Corolla Cross Hybrid | 09.2022 - 08.2025 - TOYOTA Corolla Cross Hybrid | 09.2025 ->
Original wires for towbar with 13-pin connector. Suitable for car models: - FORD Transit - Van and Bus, without preparation | 03.2024 -> - FORD Transit - Platform Truck, without preparation | 03.2024 ->
Textile car mats Horizon HR466739. For car model: FIAT 500e, Hatchback, electric, 2020 - An excellent choice for drivers who value aesthetics and comfort. Horizon floor mats are custom-made for specific vehicle models, ensuring a precise fit, perfect adhesion, and stability. Unique clips or hook-and-loop fasteners prevent the mats from slipping, ensuring a safe ride. The mats are made of 535 g/m² pile fabric, approximately 7 mm thick, and are soft and durable. The looped structure of the mats prevents dirt from getting in and makes cleaning easy. The edges of the mats are overlocked, enhancing their aesthetic appeal and unique design. The embroidered Horizon logo highlights the unique design of the mat.
Engine and gearbox protection MET FORD TOURNEO CUSTOM II/ VW T7
Code 2.1391.00 The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand). The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts. The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible. All necessary hardware is included.
Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.
Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.
