All products

Auto sakabes āķis Toyota Sienna III

Toyota Sienna III 2011-2020
Version: USA and 4x4

Semi-automatic towbar
Mechanism with quickly demountable ending

Stock: 0 pcs.

Auto sakabes āķis Toyota Sienna III

Toyota Sienna III 2011-2020
The towbar is original, designed for a specific model.
-Included is everything necessary for installation.

Stock: 0 pcs.

Rezerves ritenis un instrumentu komplekts

RR5x114.3x66.1 145/80R18 kpl - spare wheel - dock and tool set.
- Size: 145/80R18.
- Distance between bolts: 5 x 114.3mm x 66.1mm.
В комплект:
- spare wheel
- a trapezoidal jack with a ratchet mechanism and a case for its storage,
- telescopic wheel wrench, extendable (up to 50 cm), with four heads: 17, 19, 21, 23 mm,
- a case for a wheel, equipped with a velcro fastener for fastening to the floor of the trunk,
- 1 pair of work gloves.

Stock: 0 pcs.

Rear box

Stock: > 1 pcs.

motora pārsega amortizātors

BONNET STRUT KITS Forget about dirty hands and clothes with RIVAL bonnet assist kits and make the opening of tailgate much more comfortable with RIVAL tailgate assist kit built on Stabilus dynamic gas struts

KEY FEATURES

Easy opening
Hands free operation
Clean clothes
Installation onto OE fitting points
Zink-flake coating to the fittings
Individual application of fittings and selection of gas strut for each car specific model.

Stock: 0 pcs.

Syringe-aspirator

SYRINGE 04277- 500 ml-
is a professional tool for extracting or replacing fluids, including brake fluid, coolant, oil or power steering fluid.
Designed primarily for adding or sucking out operating fluids from external tanks or tanks in machines or devices.
The set includes two hoses with lengths of 190mm and 197mm with a diameter of 5/16'' and 1/4''.
The piston has a seal made of high-quality rubber resistant to long-term exposure to grease and oils.
All seals are made with the greatest precision and allow for work under high pressure.
The syringe has a venting system that equalizes the pressure under the piston, which improves its efficiency and smoothness of work.
The semi-transparent cylinder allows for an accurate check of the fluid volume and the general condition of the fluid.
Ideal for use on quads, boats, agricultural equipment, industrial gearboxes, motor vehicles, caravans etc.
SPECIFICATION:
capacity: 500ml.
colour: transparent.
equipped with a quick connector.
designed for all operating fluids.
two hoses included (possibility to connect hoses to reach hard-to-reach places).

Stock: > 1 pcs.

Syringe-aspirator

Stock: > 1 pcs.

Fire extinguisher

Stock: > 1 pcs.

Izolācijas noņemšanas knaibles

Device designed for stripping insulation from cables.

Working range of the wire stripper: 0.2 - 6.0 mm² (10 - 24 AWG)

-multifunctional, reinforced device, with rubberized handle and hardened blades

-mechanism: frontal, automatic

-in the stripping process it automatically adjusts to the cross-section of the cable being worked on

-has an additional cutter and end crimper

-stripper with adjustable stripping length

-length: 205 mm

-weight: 0.30 kg

Crimping of connector lugs:

-insulated: 0.5 - 6 mm² (22-10 AWG),

-uninsulated: 4 - 6 mm² (12-10 AWG), 1.5 - 2.5 mm² (16-14 AWG), 05 - 1mm² (22-18 AWG).

HIGH QUALITY CONSTRUCTION

AUTOMATIC AMICO INSULATION STRIPER

-The INSULATION PULLER is a practical tool for quick and precise removal of insulation from single or multicore cables. To remove the insulation, insert the wire into the jaws so that it sits flush against the tool - then squeeze the handle.

-CABLE CUTTING TOOL - another function of the wire stripper is to cut wires. The 11 mm long blade is located between the handles of the tool. To cut a cable of similar or smaller width, simply place it between the blades and squeeze firmly.

-CONNECTOR END CAPSULE - With the tool, you can crimp insulated and non-insulated connector ends onto conductors of wires with a cross-section from 1.5mm2 to 6mm2. Simply insert the conductor with the stripped end and insert it into the connector terminal, then place it in the crimping location

-PRECEPTION OF PRESSURE FORCE + LIMITER - the device has a dial which is located under the jaws. With it you can adjust the amount of pressure on the insulation, so you don't have to worry about damaging the cable while working.

Stock: > 1 pcs.

Kāpnes saliekamās

Folding ladder-04267.
Practical and functional in one! Folding ladders are the perfect solution for your home, workshop, office or warehouse.
Main product features:
- Height: 51.5 cm – allows you to easily reach the upper shelves and cabinets.
- Robust construction with a maximum load capacity of up to 150 kg - ensures safety and durability.
- Folding function - for compact storage, ideal for small spaces.
- Anti-slip steps - ensure stability and safety during use.
- Universal use - can be used both as a comfortable stool and as a comfortable ladder.
- High-quality materials - guarantee durability and resistance to mechanical damage.

Stock: > 1 pcs.

Car trash can

Compact trash can for cars - will take excellent care of the cleanliness of your car.
Highest quality, lightweight and compact design, resistant to wear and oxidation.
Elegant and modern design allows it to fit perfectly into the interior of any car - can be hung both on the side doors of the car and on the seats.
The trash can closes tightly, which prevents the spread of unpleasant odors inside the car, opens with one click.

Stock: > 1 pcs.

Drošības jostas klipši

Seat belt clips - prevent the belt from rubbing against your neck.
The seat belt must always be used correctly and continue to function as intended. The product should only be used to relieve pressure on the shoulder. Use of seat belt clips is at your own risk and you must comply with seat belt legislation.

Stock: > 1 pcs.

El.modulis

This module is designed for installation on vehicles that will tow a residential car or trailer, which requires an additional plus and charging of the battery located in the trailer.
Digital module MPWH3S-G13-ICM-LED-Modul- with standard functionality WH3(Q)-S with 13-pin connector (G13). The kit includes all the accessories for connecting the module to the vehicle's on-board network - and the G13 connector is already connected to the main harness, which reduces installation time.
This kit also contains the ICM module (Intelligent Charging Module), which is recommended, for example, for caravans. The ICM module protects the vehicle's battery, since it only allows the caravan's battery to be charged when the vehicle's engine is running.
The module has standard functionality, which means that in addition to the basic functions, it allows you to perform, for example:
- when connecting a trailer - audible confirmation of its detection,
- the ability to disable the parking sensors control unit (PDC),
- sequential switching off of the fog lights (54G) on the vehicle, when they (54G) are still on on the trailer,
- signaling of faults in the direction indicators on the trailer with an audible buzzer signal.
The module can be connected (optionally) to the LED-RGY-500 - a three-color LED indicator that informs about:
-trailer connection,
-damage to the turn signals on the trailer,
-trailer fog lights on,
-trailer battery loading.
A kit is available that includes the above LED indicator: WH3Q-S-G13-ICM-LED .
Kit contents:
Main control unit - 1 pc.
Trailer battery charging module - 1 pc.
Main wiring harness with 13-pin connector - 1 pc.
Signal cable harness (7 inputs) - 1 pc.
Power cable harness - 1 pc.
Mounting kit - 1 set
Screw set - 1 set
Installation manual - 1 pc.
Technical specifications of the module.
Current load inputs ≤2 mA.
Support for LED lights and single-filament lamps (car).
Works with cars that use pulse-width modulation (PWM) to power the lamps (digital).
Support for LED lights and incandescent lamps (trailer).
Detection of trailer/camper connection (incandescent lamps).
Detection of trailer/camper connection (LED lamps).
Possibility of controlling the parking sensor module in the car.
Detection of a malfunction of the trailer direction indicators.
Trailer reverse control.
Continuous power supply to the trailer socket.
Trailer battery charging circuit.
Intelligent charging of the trailer battery.
Alerts and notifications
Notification of trailer connection sound signal, LED-RGY-500 (optional).
Malfunction of the trailer direction indicator sound signal, LED-RGY-500 (optional).
Trailer/RV fog light on/off notification horn, LED-RGY-500 (optional)
Trailer battery charge notificationLED-RGY-500 (optional).
Car rear fog light control modes.
Trailer fog light control modes.
Sequential (independent) trailer fog light control.
Car rear fog light off.
Electrical cable harness specifications
Wiring harness length -5.0 m
Wiring harness length to socket 1.7 m
Input signal cable harness length = 1.0 = 3.0 m.
The product must be installed in a specialized workshop.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET TOYOTA LAND CRUISER 150

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Lukturu stiklu pulēšanas komplekts

Set for polishing and restoring car headlights.
The set is designed to restore heavily faded, yellowed headlights to their original shine and to improve the quality of headlight illumination.
The set includes:
- sandpaper, grain size P800: 2 pcs.
- sandpaper, grain size P1200: 2 pcs.
- sandpaper, grain size P2000: 2 pcs.
- 2 sponges: 1 white and 1 orange.
- polishing paste: 1 tube x 85 g.
- UV protective liquid: 2 x 3 ml.
- masking tape (300 * 2 cm): 1 pc.
- holder: 1 pc.
- adapter with M10 thread: 1 pc.
Electric polishing machine is not included.

Stock: > 1 pcs.

Jumta reliņi VW T5/T6

Roof rails, code 7522933B.
- Color: black.
- Certificate: TUV.
- Railings are made of durable aluminum and ABS automotive material.
- Bolted to factory points (fasteners included).
- Increases the area for carrying luggage on the roof of the car - allow you to install roof racks, bike racks, ski holders, etc.).
- The design of railings allows you to carry luggage up to 75 kg.
- Length: 226 cm (short version).
- Distance between fixing points: 7145-62 cm.
- Installation to factory points (fasteners included).
- Included: 2 pcs.

Stock: 0 pcs.

Vējsargi FORD TRANSIT/TOURNEO

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Vējsargi FORD F-MAX

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Dzinēja un ātrumkārbas aizsargs RENAULT TRAFIC

Code 2.0779.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Motora pārsega skaņas izolācija DACIA DUSTER

Engine hood soundproofing, for DACIA DUSTER I (HS) 2010-2017.
OEM part number: 65843929R.
Brand: DACIA DUSTER I (HS).
Model year: 2010-2017.
Made of high quality material.
High noise reduction and thermal insulation coefficient.
Brand new product, in original packaging.
High quality, equivalent to the original.

Stock: > 1 pcs.