All products

Tow bar MERCEDES BENZ V-klasse/VITO/EQV300

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

Sliekšņu trubas RENAULT MASTER

Oval stainless steel side bars with checker plate steps - Renault Master (2019-) L2 wheelbase.
STEELER® side steps - Renault Master - a unique and practical design combined with style and elegance.

Side steps with checker plate steps are a unique and unparalleled in the world design - checker plate, invisible joint and perfectly made finish makes the product fits great with any car.

Stainless steps are made of 60 mm diameter and 2 mm thickness bars and in combination with a hand-finished product provide the product for years not only one season.
Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.
We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Bar diameter 60 mm
Thickness 2 mm

Stock: 0 pcs.

Aizmugures bampera uzlika MITSUBISHI OUTLANDER

Rear bumper cover.
The STRONG EDITION rear bumper cover is the perfect combination of high quality thick stainless steel with original design. Manufactured from 0.8mm thick steel that is durable and resistant to bending. The decorative element in the form of ribs embedded in the base plate in ribbed grooves attracts attention with its unique design. They are made of EPAMOULD thermoplastic polyurethane, characterized by high resistance to deformation and above average durability.
STRONG EDITION rubbers have been tested for many months, resulting in a product improved in every way.

Stock: 0 pcs.

Paklāji salonā auduma Toyota LC150

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.
Attention! Depending on the year of production of the car, the location of the clips on the mat may differ.

Stock: > 1 pcs.

Papildlukturis LED BFL

BFL Frameless Slim

Dimensions: 536.00 x 34.00 x 68.00mm
Weight: 370g (net 1.90kg)
Voltage: 11-32V
Lumens: 10000 lm
Lumens (measured): 5500 lm
Wattage: 100 W
Reference value: 50
Shape: Bar
Color temperature: 6000 K
Plug type: 2-pin DT
Frame material: Aluminum
Lens material: Polycarbonate
IP rating: IP68
Model name: Frameless Slim
Information: 20x Leds, power consumption: 6.34A @12V, stainless steel brackets, IP68, 2-pin DT- plug.

Stock: 0 pcs.

LED work lamps

Stock: > 1 pcs.

LED car bulb

Stock: > 1 pcs.

LED car bulb

Stock: > 1 pcs.

LED car bulb

Stock: > 1 pcs.

Mobile phone holder

Stock: > 1 pcs.

Mobile phone holder

Stock: > 1 pcs.

Mobile phone holder for bicycle

Stock: > 1 pcs.

Cigarette lighter splitter

Stock: > 1 pcs.

Car charger

Stock: > 1 pcs.

Krusta atslēga riteņiem

Wheel cross wrench.
A quality wrench recommended for changing wheels at home, as well as equipment for cars and vans.
It has brackets with hexagonal heads of 4 sizes: 17 mm, 19 mm, 21 mm and 23 mm.

Stock: > 1 pcs.

Rezerves ritenis un instrumentu komplekts

RR5x114x66.1 13580R17 kpl - spare wheel - dock and tool set.
- Size: 135/80R17.
- Distance between bolts: 5 x 114mm x 66.1mm.
В комплект:
- spare wheel
- a trapezoidal jack with a ratchet mechanism and a case for its storage,
- telescopic wheel wrench, extendable (up to 50 cm), with four heads: 17, 19, 21, 23 mm,
- a case for a wheel, equipped with a velcro fastener for fastening to the floor of the trunk,
- 1 pair of work gloves.

Stock: 0 pcs.

Rezerves ritenis

Compact spare wheel RR5x114x66.1 13580R17
- Size: 135/80R17
- Bolt spacing: 5 x 114mm x 66.1 mm

Stock: 0 pcs.

Kravas kastes virsbūve

Hardtop canopy for Toyota Hilux DC 2016-…,

- Painted in the car color according to the color code,
- With roof rails,
- Only with doors in the back,
- Without side windows and doors,
- T-handle with key.

Stock: 0 pcs.

Textile car mats BMW X5 (E70)

Stock: > 1 pcs.

Textile car mats Volvo XC60

Stock: > 1 pcs.