All products

Wind deflectors VW AMAROK

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET VW TIGUAN

Stock: 0 pcs.

Textile car mats

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: > 1 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-L1670-05.
Front bar for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 10,1 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-L1670-08.
Front bar with skid plate for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 14,5 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-L1670-07.
Front bar with grill type protection for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 15,7 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-R1670-06.
Front bar for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 15,5 kg
Includes mounting instructions and necessary mounting brackets.
Compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-R1670-03.
Front bar for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 11,7 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-R1670-04.
Front bar with skid plate for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 16 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Aizsargstienis VW AMAROK

Code AMAROK-R1670-00.
Front bar with grill type protection for VW AMAROK.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 16,9 kg
Includes mounting instructions and necessary mounting brackets.
Not compatible with front parking sensors.

Stock: 0 pcs.

Kartera aizsargs VOLVO XC 60

The crankcase is new, a copy of the original.
Suitable for VOLVO models:
- S60, V60 2010 -...,
- XC60 2008-2017,
- V70, XC70 2006-2016,
- S80 2006-2016.
Prevents excessive wear on mechanical parts.
Protects against corrosion.
Installation in original places.
Made of high quality PVC, ABS.
Resistant to all types of working fluids and temperature extremes.
Very good quality at an affordable price.

Stock: 0 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Tow bar LADA VESTA

Options for electrical installation
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Tow bar LADA VESTA

Options for electrical installation
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Tow bar LADA VESTA

Options for electrical installation
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Auto sakabes āķis SEAT IBIZA,VW POLO

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis SEAT IBIZA,VW POLO

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.