All products

Forest marking paint Motip

Stock: > 1 pcs.

Paklājs bagāžniekā FORD TRANSIT CUSTOM

Rubber mats suitable for FORD Transit Custom 2024- L2 (8/9 seats)
width: 132,8 cm
depth: 112,0 cm
Rubber car mats protect the trunk of every car. Made from a high-quality rubber compound, it perfectly, easy to maintain and clean. Their raised edge protects car interior from dirt and extends its service life

Stock: 0 pcs.

Bremžu tīrītājs

Easily remove dirt off your brakes with MOTIP Brake Cleaner. Brake Cleaner can be used on drum brakes, disc brakes, brake linings, calipers and brake shoes. The brake cleaner has excellent dissolving properties, leaves no residue and is non-conductive and non-corrosive. MOTIP Brake Cleaner has a powerful jet-spray and can be used in various positions.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Spray parts until contamination is completely removed.
Contaminated Power Brake Cleaner should be regarded as chemical waste.

Stock: > 1 pcs.

Turbo un EGR vāŗstu tīrītājs

Dissolve deposits in EGR valves, air intake systems, manifolds and inlet valves with MOTIP EGR Cleaner. EGR cleaner restores the air supply to the engine, improves acceleration whilst reducing exhaust smoke. It is a fast-acting exhaust gas recirculation cleaner and leaves no residue. EGR Cleaner prevents resin deposits. The spray has a 360 valve.
Before use, carefully read the directions on the packaging and follow them.
For professional use only.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Follow the car manufacturer’s instructions.
Loosen the hose between the turbo and the air intake system. Start the engine and allow it to run at approximately 2000 rpm.
Spray directly into the inlet of the manifold by repeatedly, briefly pressing the nozzle until the engine runs more smoothly.
Install the hose.

Stock: > 1 pcs.

Filtra tīrišanas līdzeklis

Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
For professional use only.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Before use, allow the engine to cool down (maximum 50°C). Follow the car manufacturer’s instructions.
Remove the temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3–5 times, then allow to soak for 5 seconds.
Install the temperature or pressure sensor. Start the engine and allow it to run stationary for at least 15 minutes to evaporate most of the fluid. Perform a 30-minute test drive. This may cause steam to form.

Stock: > 1 pcs.

Dzinēja tīrišanas līdzeklis

Clean engines of vehicles and machines with MOTIP Engine Cleaner. Engine Cleaner has high dissolving properties without leaving a residue. It is also non-conductive and non-corrosive.
Usage Instructions
Disconnect the battery before use
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C. Shake the aerosol well for 2 minutes before use.
Engine cleaner contains a flammable solvent, so allow the engine to cool down.
Before treatment, cover conductive parts and switch off electrical installations.
Spray the parts to be treated evenly and allow several minutes to take effect. Treat persistent contamination with a brush. Rinse with water. The rinsing water should be regarded as chemical waste.
After cleaning, dry the conductive parts with air.

Stock: > 1 pcs.

Kontaktu tīrīšanas līdzeklis

Clean the electrical contacts in your car such as the battery with MOTIP Contact Cleaner. The Contact Cleaner is non-conductive and has various applications from batteries to mixing panels and switches. Contact Cleaner is non-conductive and non-corrosive, leaves no residue, has a powerful jet-spray and can be used in various positions.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Switch off electrical installations before treatment.
Spray the parts to be treated until contamination is completely removed.
Contaminated Contact Cleaner should be regarded as chemical waste.
Only switch on the electrical installation after the solvent has evaporated (minimum of 15 minutes).

Stock: > 1 pcs.

Iesūcošā eļļa

Loosen rusted parts with MOTIP Penetrating Oil. This oil has good penetrative properties, it contains graphite and MoS2, is moisture repellent and prevents rusting.

Stock: > 1 pcs.

Smērviela Black Oil

Prevent wear and sticking of screwed connections exposed to heavy workloads with MOTIP Black Oil. Black Oil is water repellent, prevents corrosion, and is resistant to the weather, weak acids and bases. It has a precise jet-spray and a 360° valve.
Инструкция по применению
Перед использованием внимательно прочитайте инструкции на упаковке и следуйте им.
Аэрозоль должен иметь комнатную температуру.
Оптимальная температура обработки: 10–25°C.
Перед использованием встряхните аэрозоль.
Распылите на детали перед сборкой. После испарения образуется защитная пленка, которая облегчает последующую разборку.
Защитную пленку можно удалить с помощью MOTIP Industrial Cleaner.

Stock: > 1 pcs.

Smērviela Multispray

Prevent creaking and squeaking and let stuck parts run smoothly again by lubricating the parts with MOTIP Multi Spray. The Multi Spray has a cleaning effect and removes oil, grease, wax and tar. MOTIP Multi Spray is a universal oil that lubricates, protects and cleans. It offers excellent penetration, is moisture-repellent, prevents rust, and leaves a protective film.

Stock: > 1 pcs.

Aizsarglīdzeklis Electro Protect

Prevent starting problems caused by moisture in electrical systems with MOTIP Electro Protect. Electro Protect is water- and moisture-repellent. It is also resistant to salt, weak acids, bases and is pH neutral. MOTIP Electro Protect offers excellent adhesion and corrosion protection.
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10 to 25°C.
Shake the aerosol well before use.
Switch off electrical installations before treatment.
The parts to be treated must be clean, dry, and free of grease.
Apply Electro Protect in several thin layers.

Stock: > 1 pcs.

Silikona aerosols

Protect and lubricate rubber parts against freezing, drying out and plastic parts from creaking and squeaking with MOTIP Silicone Spray. Silicone spray is water-repellent, pH-neutral and resistant to the weather and weak acids and bases. Silicone spray has outstanding mechanical and thermal stability. MOTIP Silicone Spray has a directed jet-spray and is resistant to temperatures of - 50ºC up to+ 200ºC.

Stock: > 1 pcs.

Dubļu aizsargi (kompl) AUDI Q7

Mud flaps for car model AUDI Q7, 2015-2020, 4 pcs./set.

Stock: > 1 pcs.

Pretkorozijas grunts aerosols

Protect steel parts and machines with MOTIP Anti-Corrosion Primer. Suitable as pre-treatment for topcoating with air drying alkyd resin varnishes. Fast-drying, lead-free red oxide primer to treat untreated surfaces of ferro-metal. Suitable as pre-treatment for respraying with air drying alkyd lacquer systems. Anti-corrosion primer has excellent coverage, filling properties and adhesion. MOTIP Anti Corrosion is weldable and easy to sand and has excellent corrosion prevention.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The surface should be clean, dry, and free of grease. Remove loose old lacquer and rust, and sand the surface.
The aerosol should be at room temperature. Best processing temperature: 5–30°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 20 cm.
Apply anti-corrosion primer in several layers. Shake the aerosol again before applying the next layer.
After use, clean the valve — turn the aerosol upside down and press the nozzle for approximately 5 seconds.
Drying time depends on ambient temperature, air humidity, and the thickness of the lacquer layer applied.

Stock: > 1 pcs.

Ūdeni atgrūdošs sprejs

Make materials such as the upholstery of your car waterproof with MOTIP Impregnation Spray. Suitable for all types of textiles and leather from shoes to tents. Protective spray to keep material and leather dirt-free. An invisible protective film is formed, which is water-repellent and breathable. It offers lasting protection and is user-friendly.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
The surface should be clean and dry.
Apply Impregnation Spray in several thin layers with an interval of 5–10 minutes.

Stock: > 1 pcs.

Riteņa arkas aizsargs Citroen Jumpy

Wheel arch protectors, made of durable ABS plastic, price per set.
Wheel arch protectors protect the arches from impacts and scratches.

Stock: 0 pcs.

Kabeļu aizsargsprejs

Prevent damage to cables and the wiring of your car by martens/small rodents with MOTIP Cable Protect. The treated surfaces take on a sticky protective film and Cable Protect can even be applied to moving parts. It has excellent adhesion, gives lasting protection, is odourless and resistant to the weather, weak acids and bases.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Apply Cable Protect in an even layer on the surface to be protected.

Stock: > 1 pcs.

Ķīļsiksnas aerosols

Protect the v-belt of your car with MOTIP V-Belt spray to remedy and prevent slipping. Also suitable for other vehicles and machines. Spray with excellent adhesion to protect V-Belts and to remedy and prevent slipping. MOTIP V-Belt spray is dilatant (increases in volume and viscosity) and user-friendly and gives lasting protection. MOTIP V-Belt Spray delays the wear, conditions V-belts and is resistant to the weather.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Switch off the engine.
Apply V-Belt Spray in an even, thin layer on the threads of the V-belt and allow to take effect.
After the solvent has evaporated, the engine can be switched on.

Stock: > 1 pcs.

Vasks slēgtiem dobumiem

For application with a UBC spray gun.

Protect the hollow areas of your car body against rust with MOTIP Hollow Section Wax. Hollow Section Wax is resistant to weather and weak acids and bases and has excellent rust protection. Hollow Section Wax has good penetration properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C.
Shake the can before use. Working pressure: 2.5–4 bar.
Apply Wax generously in the hollow areas.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

Vinča

The Kangaroowinch K3000SR is a compact yet powerful winch designed as the perfect balance between ATV and truck models. Engineered for reliable pulling performance in any terrain, it features a 3 HP sealed permanent magnetic motor for high efficiency and low current draw. The integrated solenoid disconnects the winch from the battery when the vehicle is off, protecting your electrical system and ensuring maximum battery life.

Built from 13 years of Kangaroowinch expertise, the K3000SR sets a new benchmark for quality and affordability in the winch market.

Recommended use:
ATV, UTV, quads

Key features:
3 HP sealed motor
Ergonomic free-spooling clutch
Comfortable wired and wireless remote controls
Synthetic rope: 5 mm × 13 m
Aluminium hawse fairlead
Automatic load-holding brake
Heavy-duty steel housing and frame
Power in/out operation

Included in set:
Wire/synthetic rope, hook, aluminium fairlead, control box, wiring kit, wired and wireless remote controls, mounting hardware, mounting plate, user manual, and warranty card.

Technical data:
Rated line pull: 1361 kg
Gear ratio: 153:1
Voltage: 12V
Solenoid: 250A
Brake: automatic in drum
Dimensions: 338 × 123 × 118 mm
Drum: 38 × 74 mm
Bolt pattern: 124 × 76 mm
Weight: 8.5 kg

Stock: > 1 pcs.