Latest news

Bike carrier

06.05.2026 Read more >

towbars

05.05.2026 Read more >

All news >

ML-SERVISS

SIA ML-SERVISS Maskavas ielas fil.


See our location on map

Address: Mazjumpravas street 66, Riga, Latvia, LV-1063

Phone: (+371) 66116670
            (+371) 29212095

Email: info@mlserviss.lv

WhatsApp (+371) 29212095

SIA ML-SERVISS filiāle "Jugla"

See our location on map

Address: Brivibas gatve street 422, Riga, Latvia, LV-1024

Phone: (+371) 29522111
           

Email: brivibas@mlserviss.lv

All products

Order by:
 
 
Category filter:
Car brand
Product Code Price Number
Vasks slēgtiem dobumiem

Protect hollow spaces in the bodywork of your car against rust with MOTIP Hollow Section Wax. Hollow section wax is resistant to the weather and weak acids and bases and has an excellent rust prevention. Hollow section wax has good penetrating properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature. Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Apply Wax generously in the hollow areas using the adapter.
After use, clean the valve — turn the aerosol upside down and press the nozzle for approximately 5 seconds.

Stock: > 1 pcs.

000046

Price: 7.00 €

Vaska pārklājums caurspīdīgi brūns

For application with UBC spray gun.

Prevent rust on your car with MOTIP anti-corrosion wax coating. The wax coating is resistant to weather, salt, water and weak acids and bases, has excellent rust protection and can be applied in thick layers.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C. Shake the can before use. Working pressure: 4–5 bar.
Apply Wax Coating in the desired layer thickness.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

00130

Price: 12.00 €

Vaska pārklājums melns

Prevent rust on your car with MOTIP Anti-Rust Waxcoating. Waxcoating is resistant to the weather, salt, water and weak acids and bases, has an excellent rust prevention and can be applied in thick layers.

To be applied with an UBC Spray-gun.
Excellent corrosion prevention.
Excellent adhesion.
Resistant to weather influences.
Resistant to salt, water and weak acids and bases.
Can be applied in thick layers.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C. Shake the can before use. Working pressure: 4–5 bar.
Apply Wax Coating in the desired layer thickness.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

00136

Price: 12.00 €

Akmens šķembu aerosols

To be applied with an UBC Spray-gun.

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface should be clean, dry, and free of grease. The can should be at room temperature.
Best processing temperature: 15–25°C.
Shake the can before use. Working pressure: 2–4 bar.
Apply Stone Chip Spray in the desired layer thickness. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the spray gun with white spirit.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000012

Price: 11.00 €

Akmens šķembu aerosols

To be applied with an UBC Spray-gun.

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface should be clean, dry, and free of grease. The can should be at room temperature.
Best processing temperature: 15–25°C.
Shake the can before use. Working pressure: 2–4 bar.
Apply Stone Chip Spray in the desired layer thickness. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the spray gun with white spirit.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000011

Price: 10.00 €

Akmens šķembu aerosols pelēks

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several thin layers. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000006

Price: 6.00 €

Akmens šķembu aerosols balts

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several thin layers. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000005

Price: 6.00 €

Akmens šķembu aerosols melns

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several layers. After drying (without sanding), it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000001

Price: 7.50 €

Bitumens

Protect the bottom of your car against weak acids and bases with MOTIP Bitumen Undercoating. Bitumen based undercoating is resistant to the weather and weak acids and bases and has an excellent rust prevention. Bitumen based undercoating remains flexible and is sound-absorbing.


To be applied with an UBC spray-gun.
Remains flexible.
Excellent adhesion.
Resistant to weather influences.
Resistant to weak acids and bases.
Excellent corrosion prevention.
Sound-absorbing.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface should be clean, dry, and free of grease. The can should be at room temperature.
Best processing temperature: 15–25°C.
Shake the can before use. Working pressure: 4–5 bar.
Apply the undercoating in the desired layer thickness.
After use, clean the spray gun with white spirit.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

000033

Price: 9.00 €

Paklājs bagāžniekā JAGUAR XF

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

BP103602R

Price: 43.00 €

Auto sakabes āķis AUDI A5(F5)/A4(B9)

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

A 42

Price: 179.00 €

Auto sakabes āķis OPEL FRONTERA

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

E 71V

Price: 369.00 €

Auto sakabes āķis OPEL FRONTERA

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: > 1 pcs.

E 71A

Price: 229.00 €

Auto sakabes āķis VOLVO V 70/S 80

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

L 20V

Price: 339.00 €

Kompozītmateriāla motora aizsargs Ford Transit Camper

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Z1038

Price: 303.00 €

Vējsargi BESTUNE T77

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH29133

Price: 39.00 €

Vējsargi BESTUNE T77

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH29134+

Price: 47.00 €

Vējsargi HONDA ACCORD

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH17004

Price: 39.00 €

Vējsargi HONDA ACCORD

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH17005+

Price: 49.00 €

Vējsargi CHERY Tiggo 8

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

PH10805

Price: 39.00 €