Motoreļļa
Synthetic engine oil for vehicles with and without exhaust aftertreatment.
It is a high performance, low SAPS, fuel-saving engine oil designed for modern passenger car gasoline and diesel engines, especially suitable for diesel engines with particulate filters.
This oil is classified as ACEA C1, which requires an even greater reduction in ash, phosphorus and sulfur than in categories C2 and C3.
The introduction of EURO 4 and subsequent emission standards for passenger car engines led to the development of new engines and emission control systems, which also required the development of new generation engine oils. To meet these exhaust standards, engines are equipped with diesel particulate filters (DPF).
These exhaust gas monitoring systems must perform their function reliably over a very long period of operation, and engine oil components must not fail.
To meet these requirements, new engine oils have been developed with a lower content of sulphated ash, phosphorus and sulfur (low SAPS).
Low ash technology keeps the engine and particulate filter clean and significantly reduces particulate emissions.
ACEA C1 motor oils must contain no more than 0.5% sulfated ash, 0.5% phosphorus and 0.2% sulfur.
Characteristics and properties
• High ash reduction keeps the particulate filter clean.
• Low phosphorus and sulfur content extends the life of gasoline engine catalytic converters.
• Best wear protection and excellent oxidation resistance.
• Special viscosity index improvers give this engine oil absolute stability in displacement.
• High viscosity HTHS low viscosity engine oil with low friction to reduce fuel consumption and CO2 emissions.
Application
Fuel-saving engine oil produced with the latest low SAPS technology, especially suitable for diesel engines with or without a particulate filter, as well as for modern gasoline engines in passenger cars.
An engine oil of this quality can only be used if it meets the ACEA C1, A5/B5 or A1/B1 specifications, for example in many Mazda engines.
This engine oil may not be used in all engines.
Follow manufacturer's specifications and instructions before use
Specification/performance level
• ACEA 2016: C1
• ACEA 2007: A5/B5
• JASO DL-1
Stock:
0 pcs.
 |
|
|
|
|
Motoreļļa
Fully synthetic low-viscosity engine oil.
Fully synthetic high-performance low-viscosity engine oil for use in modern gasoline and diesel engines, without diesel particulate filter (DPF).
It meets the highest demands of modern car engines and it is manufactured with fully synthetic components in combination with modern additives.
Properties and features
• Excellent cold start properties and reduction of cold start wear thanks to a fast lubrication of the engine at low temperatures
• Excellent properties both at high and low temperature, reliable lubrication and best possible wear protection under all conditions.
• Special motor oil developed for high-performance vehicles.
• Prevention against bore polishing and the formation of deposits thanks to his excellent cleaning and dispersant capacity
Use
High quality engine oil for gasoline and diesel engines without diesel particulate filter (DPF).
It is specially suited for high-performance vehicles of the VW Group - such as Audi S3, Audi RS4, Audi TT and others (engines VR6 FSI, V8, V12 cylinders) – especially when an oil with the VW 503 01 is required.
It may also be used in engines of other OEMs according to the specifications below
Observe manufacturer’s specifications and instructions before use.
Specifications & performance
• ACEA A3/B3, A3/B4
• API SL, SJ / CF EC
• MB 229.3 level
• BMW LL-01 level
• Audi (VW 503 01) level
• VW 503 01, 502 00, 505 00 level
Stock:
0 pcs.
 |
|
|
|
|
Motoreļļa
Fully synthetic low-viscosity engine oil
Fully synthetic high-performance low-viscosity engine oil with reduced HTHS viscosity (High Temperature High Shear) and fuel-saving properties, for use in modern gasoline and diesel engines where ACEA A5/B5 specifications is recommended.
This oil is produced with fully synthetic base oils in combination with additives of the latest generation.
Properties and features
• Reduced High Temperature High Shear viscosity (HTHS).
• This oil offers low friction values, which allow reduced fuel consumption under all driving conditions.
• Outstanding cold flow properties.
• Reliable wear protection at low and high temperatures.
• Low oil consumption.
• Best possible engine cleanliness.
Use
Fuel-economy engine oil with reduced HTHS viscosity for gasoline and diesel engines in the modern cars when ACEA A5/B5 specification is recommended.
The use of an engine oil with this performance level is mandatory for several VOLVO gasoline engines and can be employed in other engine types where the below listed specification are prescribed.
For extended oil change intervals up to 30,000 km. This is a low viscosity oil, it can’t be used in all engines.
Observe manufacturer’s specifications and instructions before use.
Specifications / Performance level
• ACEA A5/B5
• ACEA 2012: A1/B1
• API SL
• Volvo 95200377
Stock:
0 pcs.
 |
SO228.1-0W30-5L-SYNTHOPLUS VOL
|
|
|
|
Motoreļļa
Fully synthetic high performance engine oil for 4-stroke motorcycle engines
This product is made of high-quality base oils and additives, guarantees very good stability in high temperature conditions, as well as optimal lubrication. Suitable for wet clutch.
Characteristics and properties
• Fully synthetic composition with particularly high resistance to oxidation.
• Excellent engine and transmission wear protection.
• High protection against sediment and black mud.
• Optimal high temperature lubrication.
• Reduced wear when starting a cold engine due to very good low temperature properties.
• Suitable for wet clutches
Use
Fully synthetic high-performance lubricant, suitable for use in all air-cooled and water-cooled 4-stroke motorcycle engines, specially designed for optimal lubrication even at high loads.
Follow the manufacturer's specifications and instructions before use.
Specifications / Performance level
• API SM, SL, SJ, SH, SG
• JASO MA 2
Stock:
0 pcs.
|
SO295-HARLEY-20W-50-MOTO-5L
|
|
|
|
Motoreļļa
High performance synthetic motor oil for four-stroke motorcycle engines
This fully synthetic engine oil is specially formulated for the lubrication of 4-stroke motorcycle engines operating under high performance conditions and extreme temperatures.
Contains high quality synthetic base oils and selected additives for maximum protection in all operating conditions.
Characteristics and properties
• Due to its versatile nature with a wide range of applications, this grease provides very good performance when starting a cold engine, while maintaining one-time protection and oil film retention at very high operating temperatures.
• Top quality components provide excellent resistance to aging and oxidation
• Due to its excellent washing and dispersing properties, it safely prevents the formation of deposits and ensures the cleanliness of the engine.
• Suitable for wet clutches.
Use
Fully synthetic, high-performance engine oil for the lubrication of 4-stroke motorcycle engines, especially recommended for use in high-performance engines operating at the highest speeds, extreme temperatures and high loads.
Follow the manufacturer's specifications and instructions before use.
Specifications / Performance level
• API SM, SL, SJ, SH, SG
• JASO MA2 / MA
Stock:
0 pcs.
 |
|
|
|
|
Sintētiskā eļļa LONGLIFE III 5W-30
Synthetic oil LONGLIFE III 5W-30 4L.
Multi-grade, low-friction motor oil for petrol and diesel vehicles with and without diesel particulate filters (DPF) - even retrofitted. Tested for compatibility with catalytic converters and turbochargers.
Specifications:
ACEA C3
API sērijas numurs
BMW Longlife-04
Volkswagen 504 00
Volkswagen 507 00
API CF
MB 229.51
Porsche C30
Stock:
0 pcs.
|
|
|
|
|
Sintētiskā eļļa LONGLIFE III 5W-30
Synthetic oil LONGLIFE III 5W-30 5L.
Multi-grade, low-friction motor oil for petrol and diesel vehicles with and without diesel particulate filters (DPF) - even retrofitted. Tested for compatibility with catalytic converters and turbochargers.
Specifications:
ACEA C3
API sērijas numurs
BMW Longlife-04
Volkswagen 504 00
Volkswagen 507 00
API CF
MB 229.51
Porsche C30
Stock:
0 pcs.
|
|
|
|
|
Sintētiskā eļļa LEICHTLAUF SPECIAL V 0W-30
Synthetic oil LEICHTLAUF SPECIAL V 0W-30 5l.
Anti-friction all-season motor oil, developed based on synthesis technology, with excellent thermal-oxidative stability, effectively reduces wear, reduces friction losses and prevents engine contamination. Optimized for modern engines with GRM controlled timing, turbochargers and intercoolers.
Specifications :
ACEA A5
ACEA B5
API SL
API CF
ILSAC GF-3
Volvo VCC 95200377
Stock:
0 pcs.
|
|
|
|
|
Motoreļļa Special TEC V 0W-20
Motor oil Special TEC V 0W-20 5L.
Low friction motor oil based on synthetic technology. The combination of unconventional base oils and modern additive technologies reduces internal engine friction to a minimum and ensures maximum engine performance and low fuel consumption.
Specially designed to meet the requirements of various Volvo models. Tested for turbochargers and catalytic converters.
Specifications :
ACEA C5
API serial number
Volvo VCC RBS0-2AE
Stock:
0 pcs.
|
|
|
|
|
Motoreļļa
Motor oil
0W20 5L Eco-lite 5 L.
Stock:
> 1 pcs.
|
|
|
|
|
