Car rack systems

Roof rack DACIA DUSTER

Thunder Roof Bars – Dacia Duster (2018–2024) with Classic Roof Rails.

Upgrade your Dacia Duster (2018–2024) with the Thunder TRX1 lightweight aluminum crossbars, designed to fit between classic roof rails.

Key Highlights:

Light yet robust design – Aluminum profile with a maximum load capacity of 75 kg (always verify your vehicle’s roof load limit).

Aerodynamic and whisper-quiet – Streamlined shape reduces wind noise during travel.

Low placement – Crossbars mount between rails, keeping a sleek and aerodynamic silhouette.

Anti-theft protection – Locks on both mounting heads and includes a spare key.

Scratch-resistant fixtures – Mounting points with soft coatings prevent damage and allow tool-free installation.

Ideal for daily cargo, outdoor gear, or travel, these bars offer both function and style, giving your Duster a clean, professional look.

Stock: > 1 pcs.

Roof rack BMW X5(G05)

Stock: > 1 pcs.

Roof rack AUDI Q7

Stock: > 1 pcs.

Jumta bagāžnieks Toyota HILUX

Roof rack designed for Toyota HILUX. This is a spatial steel structure, painted black and trimmed on the outside of the Raptorem. On the sides of the trunk platform there are fixtures for LED work lamps and fixtures for LED panels in front of the luggage compartment. The price is for a ready-made platform with special mounts for Toyota HILUX, but without the cost of lighting. The platform is pre-flat and adapted to install tents on the roof. On the upper plane there are holes for convenient mounting of luggage racks and screwing in any individual fasteners.
   Dimensions of the platform: 1200mm x 1300mm


Powder coated with black paint and additionally coated with Raptor structure for additional protection against mechanical damage.

Stock: 0 pcs.

Roof racks

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan

Stock: > 1 pcs.

No name

Practical element for cars front end. Designed to protect engine from low temperatures. Helps

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D2 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 120 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to imp

Stock: 0 pcs.

Jumta bagāžnieks

ORION roof rack.
Includes: 2 black crossbars, in a plastic case and ORION fasteners - 4 pcs.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack.
- Rectangular crossbars with dimensions of 33 x 22 mm are made of durable steel with a plastic cover.
- Length of crossbars: 120 cm.
- Fixing set: durable legs, correctly profiled, made of thick steel and equipped with rubber elements that protect the car's paintwork.
- Maximum load: 75 kg.
The roof rack is ideal for transporting various items, such as ladders, building materials or furniture, and it is also possible to additionally install roof boxes, bicycle and ski holders, etc.
The set includes: crossbars - 2 pcs. and fasteners - 4 pcs.

Stock: > 1 pcs.

Jumta bagāžnieks

complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams-120cm.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack.
Included: transverse – 2 pcs. and fastenings – 4 pcs.
The length of the crossbars is 107 cm.
Made of durable steel, in a plastic case, black.

Stock: > 1 pcs.

Jumta bagāžnieks

complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams.

Stock: 0 pcs.

Roof racks

Accessory with decorative and practical effect for door, side window element. Designed to imp

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D1 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 130 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.

Roof racks

Textile floor mats - made from special auto textile material. Good protection from dust and w

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D3 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 130-140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 130 cm.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel and aluminum.
Bar typ: Oval.
Security Key: Yes
Certificate: Pimot
Mounting: using tools.
The kit includes: 2 aluminum beams + 4 heels + assembly instructions.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack designed for NISSAN NAVARA D23 / NP300. It is a spatial steel structure painted black and finished on the outside of the Raptorem. On the sides of the trunk platform there are mounts for LED work lamps and mounts for LED panels in the front of the luggage compartment. The price is for the finished platform with special mounts for NISSAN NAVARA, but without the cost of lighting. The platform is flat in advance and is suitable for installing tents on the roof. On the upper plane there are holes for convenient installation of luggage racks and screwing any individual fasteners.
Platform Dimensions: 1200mm x 1300mm
B013 kit (B004 platform plus BA009 fasteners)
Powder-coated with black paint and optionally coated with Raptor for added protection against mechanical damage.

Stock: 0 pcs.