Car rack systems

Roof racks

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key:
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Jumta bagāžnieks

Complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams.

Stock: 0 pcs.

Jumta bagāžnieks

Technical specifications-
Type of roof: factory mounting points with 6 or 8 mm thread.
Beam length (mm): 160 cm.
Beam Width (mm): 32.
Beam Height (mm): 20.
Payload * (kg): 70 (may depend on vehicle characteristics).
Material: steel.
Black color.
Beams section: rectangular.
Protection of the castle - beams: no.
Certificate: Pimot
Assembly: using tools.
The kit includes: 2 steel beams + 4 heels + assembly instructions.
One support heel of the trunk Dromader C15, uses only one installation location in the factory hole.
Attention-
 the roof opening is usually through and requires the installation of the seal with silicone or other sealing means.
The trunk for this model can be equipped with different cross beams of the type 'O', 'AERO', 'DYNAMIC'.

Stock: > 1 pcs.

Roof racks

Technical specifications-
Type of roof: factory mounting points with 6 or 8 mm thread.
Beam length (mm): 160 cm.
Beam Width (mm): 32.
Beam Height (mm): 20.
Payload * (kg): 70 (may depend on vehicle characteristics).
Material: steel.
Black color.
Beams section: rectangular.
Protection of the castle - beams: no.
Certificate: Pimot
Assembly: using tools.
The kit includes: 2 steel beams + 4 heels + assembly instructions.
One support heel of the trunk Dromader D-T, uses only one installation location in the factory hole.
Attention-
 the roof opening is usually through and requires the installation of the seal with silicone or other sealing means.
The trunk for this model can be equipped with different cross beams of the type 'O', 'AERO', 'DYNAMIC'.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D1 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D4 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

DROMADER C15 - an exceptionally versatile rack which fits most cars with factory - made vertical threads for the rack installation.
Technical parameters
Roof racks: Mounted in the factory, fixed and with 6 or 8 mm thread.
Bar length: 130 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key:
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
Attention - Roof apertures are generally perforated and require additional sealing with silicone or other sealants.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof racks

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D5-160 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 160 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D2 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 70 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D6+Aero130 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 130 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: silver+black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

The Beta Orlando roof rack is designed for plain roof cars.
Bar length: 120 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

Roof crossbars are designed for the TOYOTA RAV4 2019+ model.
OEM ORIGINAL TEMPLATE: PT27842192.
-not suitable for versions with panoramic roof.
Payload: 68 kg.
Cross beams are an ideal way to add functionality - their connection allows you to get a solid base for installing roof racks, bike holders, kayaks and all transport devices.
  A set of beams is designed for a specific car model, so you can be sure that it will be fully compatible with your car. The shape and dimensions of the beams have been optimized to provide simple and quick assembly and complete structural stability.
  The product is made of aluminum, coated with a layer of varnish, which gives a modern look and protects against corrosion. Beams are adapted for repeated assembly and disassembly.
Brand new, originally packaged.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack designed for Volkswagen Amarok. This is a spatial steel structure, painted black and trimmed on the outside of the Raptorem. On the sides of the trunk platform there are fixtures for LED work lamps and fixtures for LED panels in front of the luggage compartment. The price is for a ready-made platform with special mounts for Volkswagen Amarok, but without the cost of lighting. The platform is pre-flat and adapted to install tents on the roof. On the upper plane there are holes for convenient mounting of luggage racks and screwing in any individual fasteners.
   Dimensions of the platform: 1200mm x 1300mm
Kit B008 (platform B004 plus fasteners BA003)

Powder coated with black paint and additionally coated with Raptor structure for additional protection against mechanical damage.

Stock: 0 pcs.

Jumta bagāžnieks

complete with black cross beams in a plastic case, additionally can be completed with aluminum cross beams.

Stock: 0 pcs.

Jumta bagāžnieks

The Dromader D6+Aero140 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge.
Bar length: 140 cm.
Width of bar (mm): 32.
Bar height (mm): 20.
The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value.
Material: steel.
Color: silver+black.
Bar typ: Rectangular.
Security Key: (Key can be purchased separately: Komplekt PLUS)
Certificate: Pimot
Mounting: using tools.
Set includes: 2 steel bars + 4 support feet + assembly instruction.
The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type.

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack.
Included in the package:
- black steel crossbars in a plastic case: 2 pcs (can also be equipped with aluminum crossbars),
- fasteners – 4 pcs. - properly profiled and made of thick steel, massive legs equipped with rubber elements to protect the car’s paintwork from scratches.

Stock: 0 pcs.