Sānu moldingi
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots They have a protective and decorative function. ... Made from polyurethane molded technology. Perfectly tailored to the door and fits onto the tape on the 3M market. It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality. Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost. Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site. The product is universal, suitable for many car brands and models.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika VOLVO XC 60
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
> 1 pcs.

|
|
|
|
|
Aizmugures bampera uzlika Opel Insignia
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika Renault Grand Scenic
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika VOLVO XC 60
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
> 1 pcs.

|
|
|
|
|
Sānu moldingi (universāli)
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots They have a protective and decorative function. ... Made from polyurethane molded technology. Perfectly tailored to the door and fits onto the tape on the 3M market. It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality. Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost. Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site. The product is universal, suitable for many car brands and models.
Stock:
0 pcs.

|
|
|
|
|
Sānu moldingi TOYOTA RAV 4 2019-
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots They have a protective and decorative function. ... Made of molded polyurethane technology. Perfectly tailored to the door and fits onto the tape on the 3M market.
Stock:
> 1 pcs.
|
|
|
|
|
Sānu moldingi TOYOTA RAV 4 2019-
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots They have a protective and decorative function. ... Made of molded polyurethane technology. Perfectly tailored to the door and fits onto the tape on the 3M market.
Stock:
0 pcs.
|
|
|
|
|
Durvju rāmja uzlikas (plast.) TOYOTA RAV 4 2019-
Door sills Toyota Rav4 from 2019- Your vehicle's sills can be damaged during daily use. Our side skirts effectively prevent this process. In addition, the product is precisely shaped so that it fits perfectly to the threshold. Made of molded polyurethane technology. -glued to the 3M tape, which is included in the kit. - Includes four pieces. They have a protective and decorative function.
Stock:
0 pcs.
|
|
|
|
|
Aizm.bamp.uzlika (plast.) TOYOTA PROACE VERSO 2016-, PEUGEOT TRAVELLER 2016-,
The rear bumper covers fit perfectly and fulfill a protective and decorative function. They effectively protect the bumper from scratches when loading or unloading the trunk. Made of molded polyurethane technology. Installed with 3M tape. -designed for models in which the door rises up.
Stock:
> 1 pcs.
|
|
|
|
|
Aizm.bamp.uzlika (plast.) TOYOTA PROACE 2016-, PEUGEOT EXPERT 2016-, CITROEN JUMPY 2016-
Bumper trim Toyota Proace II LONG - for models with a swing door. The trims fit perfectly and follow the shape of the rear bumper. They effectively protect the bumper from scratches when loading or unloading the trunk. Made of molded polyurethane technology. -glued to the 3M tape, which is included in the kit. They have a protective and decorative function.
Stock:
0 pcs.
|
|
|
|
|
Aizm.bamp.uzlika (plast.) PEUGEOT PARTNER 2018-, OPEL COMBO 2018-
Peugeot Partner od 2018 ... (van, minivan). Peugeot Rifter od 2018 ... Opel Combo 2018-
The trims fit perfectly and follow the shape of the rear bumper. They effectively protect the bumper from scratches when loading or unloading the trunk. Made of molded polyurethane technology. Fits on 3M tape. They have a protective and decorative function.
Stock:
> 1 pcs.
|
|
|
|
|
Aizm.bamp.uzlika (plast.) TOYOTA RAV4 2018-
Bumper trim Toyota RAV IV 2019- The trims fit perfectly and follow the shape of the rear bumper. They effectively protect the bumper from scratches when loading or unloading the trunk. Made of molded polyurethane technology. Fits on 3M tape. They have a protective and decorative function.
Stock:
> 1 pcs.
|
|
|
|
|
Durvju aizsargs
Code 02233 A bumper along the edge of the door 8x130cm.
Stock:
0 pcs.
|
|
|
|
|
Aizmugures bampera uzlika Nissan X-Trail
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika Honda CR-V
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika VW T6
Do you often load purchases, luggage, building materials or travel with your dog? Then, such an accessory is very necessary for you. The rear bumper cover 2/35975 is the perfect solution for your vehicle as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° C / + 50 ° C) and visits to a car wash. Made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between the strong chrome and the deep matte layer. The edge of the bumper is also closed in the trim through a specially shaped bend. It is secured with double-sided tape that runs along all edges of the overlay. Attention! The product must be glued neatly, as it is impossible to repeat the installation after a single fixing. Once installed, you can easily load and remove luggage, and the scratched element now covers the exclusive accessory. You will receive the cover in a sturdy package with step-by-step assembly instructions. and 3M degreasing material. The kit also includes an Autosol tube (5 ml) - polishing and refurbishing stainless steel. The excellent formula of the preparation provides the steel surface with a durable gloss without scratches and a durable protective layer.
✔️ Gives the car an exclusive character and unique appearance.
Stock:
0 pcs.

|
|
|
|
|
Rear bumper cover CITROEN C 5 AIRCROSS
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|
Aizmugures bampera uzlika LEXUS RX 350/RX 450/RX 450h
ear of issue: 2008-2015 Production: Alu-Frost Poland Rear bumper trim is made INDIVIDUALLY for LEXUS RX III Metal thickness: 0.8mm Set: 1 piece Fastening: Polyurethane moisture-resistant tape of German production LOHMAN. Description: When purchasing a car, its owners often face the problem of how to protect the rear bumper of their LEXUS RX III car from chips and scratches. The rear bumper of LEXUS RX III is a body element that is constantly exposed to mechanical stress, and therefore quickly loses its appearance, which lowers the cost of the car and its presentation. To eliminate these problems, the door sills and rear bumper covers are made of stainless steel from the Polish manufacturer ALU-FROST. The rear bumper cover will not only perform a protective function, save your efforts and money for repair and painting, but also make your car stand out from the general stream. The quality and workmanship of LEXUS RX III Alu-frost car linings have earned the trust of even the most demanding customers and have passed numerous tests of time. All door sills and rear bumper covers have passed laboratory tests and received certificates of conformity and quality. Alu-frost's official warranty is 1 year. Rear bumper covers are made specifically for LEXUS RX III from high-quality Italian stainless steel using high-precision laser equipment and therefore perfectly adhere to the surface of the bumper and repeat its shape, without interfering with opening and closing the trunk lid. Installation of rear bumper covers for LEXUS RX III does not require special skills and tools from you. Act strictly according to the instructions, it is located on the package, and you will spend no more than 10 minutes on installation.
Stock:
0 pcs.

|
|
|
|
|
Rear bumper cover MERCEDES BENZ VITO/VIANO
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.

|
|
|
|
|