Durvju un spoguļu aizsargs
Door and mirror protector.
-Transparent.
- 30 cm - 2 pcs.
- 7 cm - 2 pcs.
Stock:
> 1 pcs.
|
|
|
|
|
Aizmugures bampera uzlika Fiat Freemont
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika SUZUKI VITARA
Do you often load purchases, luggage, building materials or travel with your dog?
Then, such an accessory is very necessary for you.
The rear bumper cover 2/35964 is the perfect solution for your vehicle as it has both protective functions and looks great as a decorative element.
Resistant to weather conditions (temperature -40 ° C / + 50 ° C) and visits to a car wash.
Made of polished stainless steel.
Thanks to cleaning, its surface scales perfectly between the strong chrome and the deep matte layer.
The edge of the bumper is also closed in the trim through a specially shaped bend.
It is secured with double-sided tape that runs along all edges of the overlay.
Attention!
The product must be glued neatly, as it is impossible to repeat the installation after a single fixing.
Once installed, you can easily load and remove luggage, and the scratched element now covers the exclusive accessory.
You will receive the cover in a sturdy package with step-by-step assembly instructions. and 3M degreasing material. The kit also includes an Autosol tube (5 ml) - polishing and refurbishing stainless steel. The excellent formula of the preparation provides the steel surface with a durable gloss without scratches and a durable protective layer.
✔️ Gives the car an exclusive character and unique appearance.
Stock:
0 pcs.
 |
|
|
|
|
Sānu moldingi MERCEDES BENZ V-klass
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots
They have a protective and decorative function. ...
Made from polyurethane molded technology.
Perfectly tailored to the door and fits onto the tape on the 3M market.
It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality.
Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost.
Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site.
The product is universal, suitable for many car brands and models.
Stock:
> 1 pcs.
 |
|
|
|
|
Durvju aizsargs
Door protector
Flexible protective strip for car door edges. Protects car door from damage and scratches. Very easy to install thanks to the self-adhesive tape inside. Easy to fit and cut to any length.
Specification:
- Material: rubber + plastic.
- Length: 5 m.
- Thickness: 5mm.
- Color: transparent.
Stock:
> 1 pcs.
|
|
|
|
|
Priekšēja luktura uzlikas
Chrome headlight covers for TOYOTA LAND CRUISER 2009-2013g.
The decorative covers give the halogens a stylish, elegant frame.
The set includes a set of two halogen caps. The product is made of high quality chromed ABS plastic. They are assembled using Scotch 3M double-sided adhesive tape applied inside the elements.
Stock:
0 pcs.
|
|
|
|
|
Aizmugures bampera uzlika VOLVO XC 90
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
> 1 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika VW CADDY/ FORD CONNECT
Rear bumper cover from stainless steel VW CADDY/ FORD CONNECT
Stock:
> 1 pcs.
|
|
|
|
|
Priekšējā reģistrācijas plāksne
Front registration plate.
Specification:
OEM Part Number: A2128851781 / 2128851781
Facelift version for MERCEDES E-CLASS (W212)
Model year: 2013-2016
Material: high quality black ABS plastic
Original quality
Fitting Position: Front
The offered product is a replaceable element, to be installed in the factory intended place.
Brand new product, originally packaged
Stock:
0 pcs.
|
|
|
|
|
Aizmugures durvju uzlika
VOLKSWAGEN GOLF II 1987-1991 DECORATIVE STRIP.
- Three color options are available.
-red.
- red-yellow.
- red-black.
Decorative horizontal trunk lid strips are mainly used to achieve better vehicle visibility on the road. Red color used in production of strips draws the attention of traffic participants, which increases safety. Modern style, which fits the bodywork, is not without significance in this case.
Stock:
0 pcs.
|
|
|
|
|
Aizmugures bampera uzlika VOLVO XC 90
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Moldings
Moldings.
-chrom.
- 8 mm x 6 mm x 20m.
Can be used for interior and exterior car decoration.
Stock:
> 1 pcs.
|
|
|
|
|
Moldings
Moldings.
-black , matte.
-26mm x 5mm x 5m.
Can be used for interior and exterior car decoration.
Stock:
> 1 pcs.
|
|
|
|
|
Rear bumper cover SKODA KODIAQ
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Numura rāmis
The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation
Stock:
> 1 pcs.
|
|
|
|
|
Aizmugures bampera uzlika TOYOTA RAV 4 III
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika TOYOTA COROLLA
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Durvju rāmja uzlikas OPEL VIVARO,RENAULT TRAFIC
Door sills.
Made specifically for:
- Opel Vivaro 2014.-2019,
- Renault Trafic 2014 - ,
- Fiat Talento, 2016- ,
- Nissan NV300, 2016 - .
Made of high quality stainless steel.
The linings exactly follow the shape of the threshold, are resistant to corrosion and scratches, after installation they adhere tightly to the surface without distortions.
Set of 2 pcs.
Stock:
> 1 pcs.
|
|
|
|
|
Durvju rāmja uzlikas
Door frame covers for TOYOTA HILUX 2015+ (Double Cab version).
The strips are mounted on the lacquered parts of the inner sills. They complement the inner line of the door, accentuating the threshold area with a fine brushed steel finish. This model attracts attention with the HILUX inscription, decorating each of the strips.
In addition to the style values, the strips play a protective role in protecting the sills from scratches and damage that can occur when getting in and out of the car.
The product is made of high quality automotive ABS plastic and brushed stainless steel.
The strips are assembled using Scotch 3M double-sided adhesive tape on the underside of the elements.
Stock:
0 pcs.
|
|
|
|
|
Numura rāmis ar "Nakts redzamības" kameru XD-402
License plate frame with 'Night vision' camera XD-402
Identical to the original parking sensor. Mounting diameter ø18 mm, outer diameter ø22 mm. It will fit perfectly in any car without breaking the stylistic line.
The room frame has a modern camera. The camera makes it easy and convenient to see what is happening behind the car. This perfectly solves the problem of standing in difficult places, making this maneuver a child's play. The device is connected to a monitor with a video input. The camera is completely waterproof and shockproof. The frame also has an LED well. Ability to set the camera tilt angle.
Stock:
> 1 pcs.
|
|
|
|
|
