Decorative coveres

Numura rāmis

License plate frame, red.
The frame allows you to securely fix the license plate and protects it from loss.
It has mounting holes, thanks to which it is not necessary to drill the car body.
In addition, the frame is equipped with a latch that will protect the license plate from falling out.
The frame is made of high-quality material, resistant to harmful weather conditions and scratches.
Designed for installation in cars with single-row number plates.
Dimensions:
- width: 53 cm
- height: 13 cm

Stock: > 1 pcs.

Numura rāmis

License plate frame, white.
The frame allows you to securely fix the license plate and protects it from loss.
It has mounting holes, thanks to which it is not necessary to drill the car body.
In addition, the frame is equipped with a latch that will protect the license plate from falling out.
The frame is made of high-quality material, resistant to harmful weather conditions and scratches.
Designed for installation in cars with single-row number plates.
Dimensions:
- width: 53 cm
- height: 13 cm

Stock: > 1 pcs.

Moldings

Molding.
- Decorative strip, flexible.
- Chrome.
- Width 6mm.
- Length 8 m.
It can be used for car interior and exterior decoration.
Decorative chrome strip is weather resistant.
Installation is very simple and is carried out on a double-sided adhesive tape, gluing on a clean and fat-free surface.
Attention!
Install the strip when the air temperature is above 18°C.
Do not wash your car in an automatic car wash for several hours after installation.

Stock: 0 pcs.

Sliekšņu uzlikas

Threshold cover 4733091-D.
Sliding door sill trim, for MERCEDES VITO V-KLASA W447 2014-
Door sills are the most popular product for car sill protection.
The product is made of the highest quality stainless steel, resistant to weather conditions.
Covers will add elegance and highlight the unique character of your car, while protecting the threshold from damage and scratches.

Stock: 0 pcs.

Aizmugures bampera uzlika Nissan X-Trail T33

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Door stills VW TOUAREG

Stock: 0 pcs.

Numura rāmis

License plate frame:
Material - stainless steel, painted with special powder paint.
- a frame with a double fixation of the license plate.
- maintains high quality for many years.
- gives individuality to your car.
Under the order we make almost any inscription.

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation
Under the order we make almost any inscription.

Stock: 0 pcs.

Aizmugures bampera uzlika VW JETTA 2016-

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Aizmugures bampera uzlika CUPRA BORN 2021-

Rear bumper cover, black carbona
The rear bumper insert is a high quality unique carbon fiber product combined with an original design.

Stock: 0 pcs.

Aizmugures bampera uzlika TOYOTA COROLLA CROSS XG1TJ 2022-

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: > 1 pcs.

Rear bumper cover VW T7

Stock: > 1 pcs.

Durvju rāmja uzlikas (plast.) Opel VIVARO

Door stills Opel VIVARO, Renault MASTER, Peugeot EXPERT
Your vehicle's sills can be damaged during daily use.
Our side skirts effectively prevent this process. In addition, the product is precisely shaped so that it fits perfectly to the threshold.
Made of molded polyurethane technology.
Installed on 3M tape.
They have a protective and decorative function.

Stock: > 1 pcs.

Rear bumper cover Hyundai IONIQ 6

Stock: 0 pcs.

Sānu moldingi

Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots
They have a protective and decorative function. ...
Made from polyurethane molded technology.
Perfectly tailored to the door and fits onto the tape on the 3M market.
It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality.
Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost.
Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site.
The product is universal, suitable for many car brands and models.

Stock: 0 pcs.

Sānu moldingi

Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots
They have a protective and decorative function. ...
Made from polyurethane molded technology.
Perfectly tailored to the door and fits onto the tape on the 3M market.
It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality.
Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost.
Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site.
The product is universal, suitable for many car brands and models.

Stock: 0 pcs.

Sānu moldingi

Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots
They have a protective and decorative function. ...
Made from polyurethane molded technology.
Perfectly tailored to the door and fits onto the tape on the 3M market.
It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality.
Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost.
Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site.
The product is universal, suitable for many car brands and models.

Stock: 0 pcs.

Rear bumper cover Renault Express 2021-

Stock: 0 pcs.

Aizmugures bampera uzlika BMW X5 (F15)

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: > 1 pcs.

Side moldings TOYOTA C-HR 2016-

Decorative door moldings designed for TOYOTA CH-R 2016+
The kit includes four items. The slats are made of high-quality chrome-plated ABS plastic.

Stock: 0 pcs.