Instruments

Compressor

EPAP11 – 3-in-1 Cordless Compressor with Jump Start and Power Bank
The EPAP11 is a multi-functional portable compressor with a built-in battery, jump starter, and power bank. Designed for drivers who need reliable tire inflation, emergency power, and electronics charging – all in one compact device.
With a maximum pressure of 150 PSI and a flow rate of 20 L/min, this compressor is ideal for inflating car, motorcycle, and bicycle tires, air mattresses, and balls. Inflation time from 0 to 2.5 bar is approximately 10–11 minutes. The device offers four preset operating modes: car, motorcycle, bicycle, and ball – making it easy to quickly set the correct pressure without the need for manual programming. The pressure scale ranges from 14.5 to 51 PSI.
The built-in 4x 2000mAh (14.8V) battery allows for wireless operation and charging of mobile devices via the USB port (5V/2.4A). The compressor can also be used as an emergency booster to jump-start a vehicle – the starting current is up to 500A. The set includes smart jumper cables with a full suite of safety features: spark protection, reverse polarity protection, overload protection, and overheating protection.
An additional feature is the built-in 5W LED light, which offers two white brightness levels and a red emergency light with a flashing function – ideal for marking roadside stops or working at night.
Key Features:
Inflates up to 150 PSI / 10 bar (20 l/min)
4 pre-set inflation modes: car, motorcycle, bicycle, ball
Pressure range: 14.5–51 PSI
Emergency vehicle start – starting current up to 500A
USB power bank (5V / 2.4A)
Built-in LED lighting: two brightness levels (white) + red flashing emergency light
Protection: overload, short circuit, overheating, and reverse polarity
Housing made of fire-resistant ABS plastic (V0 class)
Includes:
– Compressor
– 1.6 m inflation hose
– 4 interchangeable nozzles (for mattresses, balls, etc.)
– Smart jumper cables
– USB Type-C power cable
– Cigarette lighter cable (approx. 3 m)
– Fabric carry case
– Instructions
Technical Specifications:
Power Supply: Built-in 14.8V battery (4×2000mAh)
Power: 80W
Operating Current: 10A
Start Current: 500A (max.)
Maximum Pressure: 150PSI (10.3Bar)
Pressure Range: 14.5–51 PSI
Capacity: 20L/min
Inflation Time (0–2.5bar): 10–11 minutes
Inflation Modes: Auto / Moto / Bike / Ball
USB IN: 5V / 2A
USB OUT: 5V / 2.4A
Housing Material: ABS (V0 Class)
LED Light: 5W (white – 2 brightness levels, red – flashing)
Charging Time: 4.5–5 hours

Stock: > 1 pcs.

LCD Paint Thickness Gauge

Stock: > 1 pcs.

Krusta atslēga riteņiem

Wheel cross wrench.
A quality wrench recommended for changing wheels at home, as well as equipment for cars and vans.
It has brackets with hexagonal heads of 4 sizes: 17 mm, 19 mm, 21 mm and 23 mm.

Stock: > 1 pcs.

Krusta atslēga riteņiem

Wheel cross wrench.
Ideal for replacing wheels on cars, buses, agricultural machinery, etc.
It has brackets with heads of 4 sizes: 17 mm, 19 mm, 21 mm and 22 mm.

Stock: > 1 pcs.

Krusta ratatslēga

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
It has standart hex working profile.
Rods are made by resistance welding and reinforced with the steel riveted pad.
Reduced arm length and wrench rod diameter.
Protected against corrosion by synthetic polymer coating.

Stock: 0 pcs.

Krusta ratatslēga

Cross ratchet 17x19x21x23

Stock: > 1 pcs.

Krusta ratatslēga

Cross ratchet 17x19x21x23

Stock: > 1 pcs.

Screwdriver

Stock: 0 pcs.

L-veida seškanšu atslēgu kompl.

L-type ball end hex wrench set
Set is equipped with ball hex keys placed on a plastic holder.
Individual packaging - a blister.
Number of items - 8
Kitting - 3,0, 4,0, 5,0, 6,0, 7,0, 8,0, 10,0, 12,0 мм

Stock: 0 pcs.

Tap wrench L-shaped telescopic (1/2")

>Tap wrench is made by cold stamping method
>Material – chrome-vanadium tool steel
>Equipped with a spring-loaded holding ball
>It is chrome plated and matt finish to resist corrosion
>Has a standard square drive 1/2'
>Wear-resistant, suitable for the long-term usage at max loads
>Equipped with a plastic handle with a rubber anti-slip coating

Stock: 0 pcs.

Lāzera tālmērs

Laser rangefinder 60 m LCD HD.
Accurate laser rangefinder with a range of 60 m. Designed to accurately perform various types of measurements. The device remembers up to 99 recent measurements. Equipped with several functions that facilitate and speed up the work - allows you to perform a single continuous measurement, calculate the area, volume, length of the side of a triangle (Pythagoras) based on measuring the length of the hypotenuse and the angle between the leg and the hypotenuse.
Features and specifications of the product:
- LCD display: clear, good visibility even in bright sunlight.
- Laser class: II
- Laser type: 620-690 nm, <1 mW
- Measurement range: from 0.05 to 60 m
- Measurement accuracy: +/- 1.5 mm
- Remembers the last 99 measurements.
- Functions: calculating the area, volume, length of the side of a triangle.
- Rubberized edges of the device: provide a secure grip and protection against falls.
- Measurement is accompanied by a sound signal.
- Automatic laser shutdown after 30 seconds.
- Automatic rangefinder shutdown after 180 seconds.
- Power supply: 2 AAA batteries.

Stock: > 1 pcs.

LED darba lampa

LED work lamp WT14.
The work lamp with powerful COB LED lighting is suitable for use in professional workshops, as well as in home gardens and campsites as supplementary lighting. COB LEDs guarantee higher light intensity and more uniform illumination than traditional LEDs.
Specifications:
- Luminous flux: 1000lm.
- 6500K light (white) + beacon red mode.
- 6 lighting modes.
- Operating temperature: -45° - 50°C.
- Service life: 100000 h.
- Material: ABS + Metal.
- Type of light: COB.
- Operating time with a full charge: 4 hours.
- Time to fully charge the built-in battery: 2.5-3 hours.
- Charging: micro USB cable (included).
- Overload protection.
- The case is resistant to shock, dirt and moisture.
- Built-in standing/hanging handle.

Stock: > 1 pcs.

LED darba lukturis

LED headlamp LH03.
The work lamp with powerful COB LED lighting is suitable for use in professional workshops, as well as at home and camping as supplementary lighting.
Specifications:
- White color 6500K + red warning mode.
- 6 lighting modes (white and red).
- Operating temperature: -45° - 50°C.
- Service life: 100000 h.
- Material: ABS + Metal.
- Type of light: COB.
- Built-in rechargeable battery.
- Operating time with a full charge: 5 hours.
- Built-in battery charging time: 2.5-3 hours.
- Charging: micro USB cable (included).
- Overload protection.
- The case is resistant to shock, dirt and moisture.
- 2 switch buttons.

Stock: > 1 pcs.

LED darba lukturis

LED headlamp LH04.
The work lamp with powerful COB LED lighting is suitable for use in professional workshops, as well as at home and camping as supplementary lighting.
Specifications:
- White color 6500K.
- 5 lighting modes.
- Operating temperature: -45° - 50°C.
- Service life: 100000 h.
- Material: ABS + Metal.
- Type of light: COB.
- Built-in rechargeable battery.
- Operating time with a full charge: 5 hours.
- Built-in battery charging time: 2.5-3 hours.
- Charging: micro USB cable (included).
- Overload protection.
- The case is resistant to shock, dirt and moisture.
- 1 switch button.

Stock: 0 pcs.

Led pārnēsājamā lampa

Rechargeable COB-LED Worklights
3W COB+1W LED, 280Lm

Stock: 0 pcs.

LED spuldžu testeris

LED bulb tester 12 V
-60w

Stock: > 1 pcs.

Corner adaptor gear for drill

Stock: 0 pcs.

Leņķa skrūvgriezis uzgaļiem

Angle screwdriver for 1/4' bits
Angle screwdriver suitable for 1/4” bits.
Indispensable in places where it is impossible to use screwdrivers or manual screwdrivers directly due to limited maneuvering space. Made of CrV tool steel.
The ribbed surface of the screwdriver provides a secure grip.
Length: 105 mm.

Stock: > 1 pcs.

Adhesive tape

Stock: > 1 pcs.

Līmlenta - divpusēja

Adhesive tape 3M 0.6 cm x 500cm,

Stock: > 1 pcs.