Instruments

Abpusējā līmlenta

Double-sided adhesive tape 90x2cm

Stock: 0 pcs.

Akumulatora lādēšanas

An advanced charging function rectifier EPCBC03 . Powered by 230V AC voltage, it offers an output voltage of 12/24V, providing versatile charging. The rectifier is ideal for charging batteries for cars with START / STOP engines.
Technical data:
Power supply: 230V AC.
Output Voltage: 12/24V.
Output Current: Max 15A.
Maximum load power: 130W.
Power without load: 3.2W.
Cooling System: Fan.
Dimensions: 17.5x13.5x7.5cm.
Voltage identification for 12V: 8V - 14.5V.
Voltage identification for 24V: 18V - 29V.
Output cable length: 120 cm.
Input cable length: 140 cm.
8 STAGES OF CHARGING:
Phase 1: Battery Assessment - Examining the battery's charge state and verifying the correctness of the connections to the rectifier.
Phase 2: Desulfation - Identifying a battery with sulfate deposits. Low-voltage, high-current pulsating charging allows for the removal of sulfate from electrodes, restoring the original battery capacity.
Phase 3: State Check - Checking whether the battery is not damaged and whether it is capable of accepting a charging current. This prevents charging a damaged battery.
Phase 4: Soft Start - Begins charging an undamaged battery with low current (about 15%), gradually increasing its value.
Phase 5: Main Charging - Charging the battery with maximum constant current, automatically adjusted depending on the charge state, until 80% capacity is reached.
Phase 6: Final Charging - Charging with decreasing current and constant voltage until the battery is fully charged (100%).
Phase 7: Charging Test - About a two-minute test to check if the battery charge level is maintained after charging has ended. If so, the charging process is completed.
Phase 8: Voltage Maintenance - Monitoring the battery voltage and maintaining an optimal charge at the 95-100% capacity level using current pulses.

Stock: > 1 pcs.

Akumulatora lādēšanas

EPCBC02 8A 12/24V BATTERY CHARGER WITH BATTERY REPAIR FUNCTION
Advanced charging rectifier by EINPARTS. Powered by 230V AC, it offers an output voltage of 12/24V, ensuring versatile charging. Equipped with an intelligent temperature monitoring system, battery status indication, and four different operating modes, this rectifier is an indispensable tool for charging and maintaining car batteries, AGM, calcium, and low-capacity batteries. Reliability, safety, and effectiveness!
Technical Data:
Power Supply: 230V AC
Output Voltage: 12/24V
Output Voltage without Load: 13.8V
Initial Minimum Voltage: Above 2V
Output Current:
For 12V - 8 A
For 24V - 4 A
Maximum Power under Load: 130W
No-Load Power: 3.2W
Cooling System: Fan
Dimensions: 17x10x5.5 cm
Power Cord Length: Approximately 115 cm
Length of Clamp Cables: Approximately 70 cm
Equipment:
Battery Charge Level Indicator
Voltage and Current Charging Indicator
Ambient Temperature Sensor (If the temperature drops below 10 degrees Celsius, the rectifier will increase the charging voltage. If the temperature rises above 29 degrees Celsius, the rectifier will decrease the charging voltage)
Indication of Incorrect Battery Connection, Contact Contamination, or Battery Damage
4 OPERATING MODES:
Car Battery Charging (30-150Ah):
For 12V - Maximum Charging Current 8A
For 24V - Maximum Charging Current 4A
AGM or Calcium Battery Charging
Low Capacity Battery Charging (6-30Ah):
Maximum Charging Current 1.5A
Battery Repair:
Repair of Old, Sulfated Batteries (Note that not all batteries are suitable for repair)

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Charger with microprocessor 4A IP65 TUV / GS.
Ideal for lead-acid, gel and AGM batteries.
Use - cars, ATVs, boats, mowers, scooters, motorcycles, snowmobiles and jet skis.
Microprocessor control, nine-step intelligent charging characteristics.
Stable charging function.
Diagnose and charge heavily discharged batteries.
Insulated terminals.
Battery capacity 1.2 Ah - 120 Ah
Input parameters: 220-240 VAC 50 Hz
Output parameters: 6V 2A / 12 V 2 / 4A
Battery Capacity: 1.2 Ah - 120 Ah

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery Charger 42403.

Specifications:
- capacity 20-90Ah,
- charging voltage of 6-12V,
- charging the battery in 3-4 hours,
- LED indicator for monitoring the level of load,
- if the battery is overloaded, the charger will maintain it at a normal current level.
- if a short circuit occurs, the charger will automatically turn off and resume its work after 1-2 minutes.
- High-quality plastic case.

  Only for 6 V and 12 V batteries with lead and acid.
The charger should be powered by an AC voltage source of 220-240V.
  Avoid contact between the positive and negative terminals to prevent a short circuit.
  We recommend storing the rectifier in a dry and well-ventilated area.
- Quality goods.
- Easy to use.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

The DBC-4A rectifier can be used to charge lead-acid (conventional and MF), Ca / Ca, AGM and gel batteries. This is a microprocessor rectifier made in accordance with the IP65 standard, which means resistance to dust and splashes, as well as splashing with a low-pressure water jet. Has guarantees from:
-short circuit.
- reverse battery connection (reverse polarity).
-open circuit.
-protection.
- recharge the battery.
- overload rectifier.
Rectifier overheating.
Has 6 charging modes:
Batteries 6 V to 14 Ah
7.2 V to 2 A
7.4 V to 2 A (charging at low temperatures)
12 V to 14 Ah batteries and deeply discharged

14.3 V to 2 A
14.7 V to 2 A (charging at low temperatures)
12V battery above 14Ah

14.3 V to 4 A
14.7 V to 4 A (charging at low temperatures)
It shows the battery voltage and charge level on an ongoing basis and adjusts the charging current depending on its needs. After charging, FULL is displayed and the battery voltage is maintained.
Specifications:
Supply voltage 230V 50 Hz
Output voltage: 6 / 12V
Power Consumption: About 60 W (Standby 1 W)
Charging voltage:
7.4 V (for 6 V batteries)
14.7 V (for 12 V batteries)
Charging Current:
2A +/- 10%,
4A +/- 10%
Supported Battery Capacity:
6V - 1.2Ah to 14Ah
12V - 1.2Ah to 14Ah and 14Ah to 120Ah
Degree of protection: IP65
6 charging programs switched by the “OPERATION MODE” button
Has a backlight display.
   Gel batteries with a capacity of up to 14 Ah, used in motorcycles and scooters, must be charged by selecting the program with the motorcycle icon on the display.
  Charging with a higher current may damage the battery.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery Charger for all types of batteries (lead-acid SLA, AGM, GEL).
- Charging voltage 12V/24V.
- Fully automatic charging process.
- Charging current: 12A - recommended for battery, capacity from 8Ah to 180Ah.
- Displays battery percentage and current battery voltage.
- Automatically carries out the regeneration process when a deeply discharged battery is detected.
- Displays the current charging capacity of the generator as a percentage.
- Start assist function 75A - petrol up to 3000 cm3, diesel up to 2000 cm3.
- Durable clips and metal housing.
- Reverse connection and short circuit protection.
- Overload protection 80A.
- LED display provides convenient operation with an overview of the charging status.
- cables 6mm2: 150cm.
- power cable: 190cm.

Stock: > 1 pcs.

Akumulatora lādēšanas ierīce

Compact and powerful lithium starter OSRAM BATTERYstart 300 with external battery function for small and medium-sized vehicles with a voltage of 12 V (petrol engines 6 l and diesel engines 3 l).
The starter is equipped with a bright LED flashlight.
This jump starter features a power bank feature with two 2.1A USB ports to charge your electronic devices on the go - just plug in the USB charger and the battery starts working.
Technical description:
- Voltage: 12 V.
- Starting current: 300A (max. 1500A)
- Battery: LiCo2 13000 mAh.
- Charging: micro USB 3 hours.
- Operating temperature: -20°С…+40°С
- Dimensions: 168.00 x 88.00 x 33.00 mm.
- Weight: 490 g.

Stock: 0 pcs.

Akumulātora lādēšanas ierīce

The battery charger 3-in-1 is a reliable and multifunctional device for professionals and amateur drivers, combining the functions of a jump starter, external battery, and LED flashlight.
Specifications:
- Voltage: 12 V
- Battery capacity: 12,000 mAh
- Starting current: 800 A (max. 1600 A)
- Input voltage: 5 V/3 A
- USB outputs: 5 V/3 A, 5 V/2 A
- Operating temperature: -20 to 60 °C
- Full charge time: 4-5 hours (QC)
- LED flashlight: continuous/flashing/SOS
- Functions: engine starting, lighting, charging devices.
Key features:
- High starting power allows you to jump start cars, vans, and motorcycles in challenging conditions.
- USB ports provide fast charging for mobile devices. - LED flashlight with emergency modes increases safety at night and in difficult situations.
- Compact design allows for easy storage and transportation.
- Durable housing ensures durability and resistance to mechanical damage.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

The 4-in-1 12V, 12Ah, 1600A charger is a reliable and professional multifunctional device that combines the functions of a jump starter, power source, air compressor, and LED flashlight. Its high battery capacity and high starting current make it ideal for the most demanding conditions, both in auto repair shops and for everyday use by drivers.
Specifications:
- Voltage: 12V
- Battery capacity: 12,000mAh
- Starting current: 800A (max. 1600A)
- Input voltage: 5V/3A
- USB outputs: USB1: 5V/3A, USB2: 5V/3A, 9V/2A, 12V/1.5A
- Operating temperature: -20°C to 60°C
- Full charge time: 4-5 hours
- LED: steady/flashing/SOS
- Functions: starting, lighting, charging devices, inflating
- Max. air compressor pressure: 150 psi / 3.5 bar / 355 kPa
Key features:
- Reliably starts cars, vans, and motorcycles in any conditions.
- Powerful compressor quickly inflates tires, mattresses, and camping gear.
- USB ports provide fast charging for mobile devices.
- LED flashlight with emergency mode increases safety at night and when working in the field.
- Durable housing provides resistance to mechanical damage.
- Wide operating temperature range ensures operation even in harsh conditions.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

The 3-in-1 Jump Starter, 12V 12Ah 1000A, is a modern and efficient device that combines the functions of a jump starter, a power bank, and an LED flashlight. Equipped with a clear LCD display, the device provides complete control over its operation and charge level. Its high battery capacity and high starting current make it ideal for use in workshops, service centers, and for drivers who demand high quality and safety in any driving situation. Specifications:
- Voltage: 12V
- Battery capacity: 12,000mAh (Li-ion)
- Starting current: 500A (max. 1000A)
- Type-C input: 5V/2A, 9V/2A, 12V/1.5A
- USB outputs: USB 1 and 2 (QC 18W): 5V/3A, 9V/2A, 12V/1.5A
- DC output: 15V/10A
- LED flashlight: 3 modes (constant / SOS / strobe)
- Housing: durable PC + ABS
- LCD display to show battery level and status
Key features:
- High starting power allows you to jump-start cars, vans, and motorcycles.
- Three USB ports and a DC output provide a wide range of charging options for mobile devices and electronics. - Powerbank function with fast charging support (QC18W).
- LED flashlight with emergency modes increases safety at night and in emergency situations.
- Durable ABS and polycarbonate housing ensures durability and resistance to intensive use.
- Compact size and easy-to-read LCD display provide maximum convenience.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery charger EST-302 is designed for automatic charging of lead-acid batteries with a voltage of 6 V or 12 V and a capacity of 34 ÷ 60 Ah.
- 230 V AC power supply
- Rated power consumption 70 W
- Output voltage 6 V 12 V
- peak charging current 6A
- Rated charging current 4.5 A
- Capacity of rechargeable batteries 34 ÷ 60Ah
- Protection against transformer overheating using a thermal switch
- Protection against short circuit with fuse
- Plastic case
- Dimensions in mm: 180 x 150 x 100
- Weight in kg: 1.50

Stock: > 1 pcs.

Akumulatora lādēšanas ierīce ar Powerbank

02524- Charger with Powerbank 12V 4Ah 800A SJ02, portable.
The modern charger is a small and highly functional battery-powered car starter with powerbank function, a safe equipment for every auto repair shop, home garage and car.
It offers a wide range of features:
- Starting all petrol and diesel engines.
- Battery charge level indicator.
- LED display.
- Built-in flashlight.
- Electronic device charging function - allows you to charge the batteries of a smartphone, laptop, camera, tablet or other electronic device.
- External battery.
- Battery capacity up to 4000 mAh.
- Durable housing.

Stock: > 1 pcs.

Voltmeter

Textile floor mats - made from special auto textile material. Good protection from dust and

Stock: > 1 pcs.

akumulātora testeris

- accumulator tester
12V/24V

Stock: 0 pcs.

accumulator tester

Stock: > 1 pcs.

Āmurs

Safety hammer with hanger.
Hammer and safety knife in one.
A very useful and indispensable device in case of a collision or accident.
In modern cars, belt tensioners are triggered on impact, sometimes it is impossible to unfasten them. Thanks to this device, we can easily break the glass when the door is jammed or cut the seat belt, even if we have a limited range of motion.
Dimensions:
- total height approx. 17.5 cm
- width max. at the top about 7cm

Stock: > 1 pcs.

Asmeņi nažiem

Blades for knives.
- With breakable segments.
- Blade length 18 mm.
- 10 pieces in a set.
Breakable knife blades provide a consistent and high-quality cutting edge and high rigidity of the entire blade despite its segmented design.
Due to this, when the blade is blunt, one segment can be broken off, obtaining another, sharp fragment.

Stock: > 1 pcs.

Asmeņi nažiem

Blades for knives 100x18x0.5 mm SK5 (black blade) 10 pcs.
- Size: 100x18x0.5 mm.
- 10 pieces per package.
- Made of carbon steel SK5, coated with black anti-corrosion coating.
- Replaceable, with breaking segments.

Stock: > 1 pcs.

Ātri noņemams uzgalis

11440
Adapter tip, M1 / 4 quick-detachable.
It is used to connect the pneumatic tool to the compressed air source.
Material - carbon steel.
Packing - blister.

Stock: 0 pcs.