Instruments

Skrūvgriežu komplekts

Set of insulated screwdrivers, 11 pcs.
-Adapted to work under high voltage.
-Screwdrivers made of CR-V chrome vanadium steel, a material that is highly insulating, and a hardened, magnetic tip.
Set contains:
- 6 flat screwdrivers:
2.5 x 75
3 x 100
4 x 100
5×125
6 x 100
8 x 175
- 5 Phillips screwdrivers:
PZ 0 x 75
PH 0 x 75
PH 1 x 80
PH 1 x 100
PH 2 x 100
It is packed into a special case with the handle for storage of screw-drivers and convenient carrying.

Stock: > 1 pcs.

Digitālais skaitītājs

Digital meter with LCD display.
Suitable for both home use and professional electricians. Used to measure DC and AC voltage, DC current and resistance.
The clear LCD display makes it easy to read the measurement results.
Specification:
- 19 switching ranges.
- COM socket: measuring socket, black wire '-'.
- Input connector: VΩmA, red wire '+', measurement V, A (except 10A range), R.
- 10A socket: measuring socket for 10A range, red wire '+'.
- Socket for transistor measurement.
- Overload protection.
- Automatic shutdown.
- Low battery indication.
- Sound alarm.

Stock: > 1 pcs.

Testeris

Voltage detection tester, 6-24V.
The device is designed to determine the voltage in the electrical installations of vehicles with a voltage of 6/24V.
Inside the transparent handle is a light that lights up when voltage is detected.
The included alligator clip cable simplifies vehicle wiring troubleshooting and is used to quickly detect power failures in electrical systems, fuses, or lighting.
Technical data:
- Operating range: 6V-24V.
- retractable cord with crocodile clip.
- Material: plastic.
- Length: 120 mm.
Weight: 55g

Stock: > 1 pcs.

Testeris

DC and AC voltage tester with LCD display, 12-250 V.
It is used to measure alternating voltage in the range of 12-250V with a frequency of 50-500Hz, to check the integrity of the cable and grounding.
Suitable for both professional electricians and occasional home use. The check is carried out by contact or induction method, i.e. when the tester approaches the installation being tested.
Specifications:
- LCD-screen displaying the results of measurements in the ranges up to 12, 24, 36, 55, 110 and 220 V.
- Additional LED signaling.
- Flat tip 2.9 mm wide - provides precise access to small elements.
- Power supply: 3 x LR41 (included)

Stock: > 1 pcs.

Domkrats

The inflatable jack is a professional pneumatic car lift powered by car exhaust gases or air from a compressor.
With high load capacity, the inflatable car lift can quickly lift almost all vehicles up to 4 tons, including trucks, jeeps, cars, SUVs, etc.
Indispensable for use in extreme conditions - works great in off-road conditions and in other difficult situations.
- Load capacity 4 tons.
- Lift height 78 cm.
- Made from durable polyester fabric coated with PVC on both sides.
- Inflated with air from a compressor or car exhaust directly from the exhaust system.
- Easy to use and at the same time much more practical than a conventional mechanical lift.
- Its robust construction is highly resistant to explosion, even in case of punctures.
- Compact - when folded takes up little space in the car.
Included:
- Hose with connection to the exhaust system of the vehicle.
- Compressor connection kit.
- Repair kit - 2 patches, 1 glue and 1 pair of gloves.
- Convenient storage bag.
Weight 5kg.

Stock: > 1 pcs.

Hi-Lift statīvs

Stand for Hi-Lift, black.
The original stand for the Hi-Lift lift, which prevents the jack from sinking into the ground.
Attention! The stand can in no way be used for vertical stabilization and does not prevent tipping over.
Technical details:
Base dimensions: 28x28cm
Suitable for a lift whose base measures: 18x12cm.
Weight: 2 kg.

Stock: 0 pcs.

Elektroniskais motorstundu skaitītājs

Electronic hour meter.
Works with all 2T and 4T spark ignition engines. It is ideal not only for passenger cars, but also for all vehicles and machinery powered by a gasoline engine, such as motorcycles, attachments and lawn mowers.
Product Features:
- Compact petrol engine hour meter allows precise monitoring of engine wear.
- Thanks to the use of a counter, you always know when to change spark plugs, oil or adjust valves.
- Easy installation: just wrap a few turns of one meter wire around the spark plug.
- During operation, an hourglass will appear on the screen, indicating that the counter is working correctly.
- Counts up to 9999.9 hours with 0.1 hour resolution.
- Turns on automatically when the engine is started.
- It does not require batteries to operate!
- Waterproof, shockproof, resistant to high temperatures - up to 85 degrees Celsius.
Everything needed for assembly is included in the kit.
Specification:
- Material: plastic.
- Power supply: external (after starting the engine).
- Measuring range: 9999.9 h.
- Measurement accuracy: 0.1h.
- Dimensions: 4.1 cm x 4.6 cm x 7.3 cm.
- Power cord length: 190 cm.
- Black color.

Stock: > 1 pcs.

Riepu protektora mērītājs

Digital tread depth gauge.
It is an essential tool for measuring tire wear, useful in every auto repair shop, tire curing station and in every car. It can be used not only to measure tire tread, but also for other car or motorcycle related measurements. Most importantly, the measurement scale is from 0.0 to 25.4mm, making it a versatile measuring tool.
Product Features:
- Precise measurement.
- Simple controls.
- Very handy (fits in your pants pocket) and easy to use.
- Quick switch between metric and inch measurements.
- Low power consumption, which allows the battery to work for a very long time.
- Large and legible display showing the result.
Specification:
- Material: plastic.
- Power supply: SR44/LR44 1.5V battery.
- Measuring range: 00-25.4 mm.
- Accuracy: 0.01 mm.
- Units: inches/mm.
- Dimensions: 60mm x 113mm x 13mm.
- Weight: 90 g.

Stock: > 1 pcs.

Digitālais riepu spiediena mērītājs

Premium digital tire pressure gauge for cars, motorcycles, etc.
Suitable for standard automotive valves.

Replaceable lithium battery LR44 - 2pcs (included).
Measuring range 0.3-10 BAR, 3-150 PSI
No calibration is required.
Excellent measurement reproducibility.
Digital, easy-to-read display.
A special profile that makes it easy to take measurements even on unusual alloy wheels.
High standard measurement accuracy of +/- 2%.
Energy saving.

Stock: > 1 pcs.

Domkrats

Jack PWHL-48 black.
PWHL-48 jacks have a very robust, easy-to-use design.
Application:
-lifting machines, agricultural machinery and other devices.
The PWHL-48 is suitable for both professional, extreme use and home use in your workshop or off-road vehicle.
The foot is made of forged steel.
The lift is equipped with an additional retractable squeeze tip and a convenient handle protection.
Raising and lowering is quick and smooth, the lift does not jam even in difficult working conditions, when sand and dirt get in.
Dimensions:
- height 121 cm
- weight: 13.5 kg
- carrying capacity: 3 tons.
- when using a jack, it is necessary to use the PW-ORB stand.

Stock: 0 pcs.

Skrūvgriežu komplekts

Tool set complete set of 28 screwdrivers and 9 heads from 5 to 13 mm.
- 38 pcs/set.

Stock: > 1 pcs.

Skrūvgriežu komplekts

Tool set with 22 screwdrivers and 6 sockets from 5 to 10 mm.
- 30 pcs/set.

Stock: > 1 pcs.

Skrūvgriežu komplekts

Tool set complete set of 12 screwdrivers and 6 heads from 5 to 10 mm.
- 21 pcs/set.

Stock: > 1 pcs.

Screwdrivers set

Stock: > 1 pcs.

Avārijas āmurs

Emergency hammer for breaking glass and cutting seat belts.

Stock: > 1 pcs.

LED darba lukturis

LED headlamp LH04.
The work lamp with powerful COB LED lighting is suitable for use in professional workshops, as well as at home and camping as supplementary lighting.
Specifications:
- White color 6500K.
- 5 lighting modes.
- Operating temperature: -45° - 50°C.
- Service life: 100000 h.
- Material: ABS + Metal.
- Type of light: COB.
- Built-in rechargeable battery.
- Operating time with a full charge: 5 hours.
- Built-in battery charging time: 2.5-3 hours.
- Charging: micro USB cable (included).
- Overload protection.
- The case is resistant to shock, dirt and moisture.
- 1 switch button.

Stock: 0 pcs.

Eļļas filtra uzgriežņu atslēga

Universal chain wrench for oil filter OILW-C.
- Metal anti-slip chain.
- Chain length ~ 38 cm.
- Durable metal handle.
Other uses: works well at home as a can opener.

Stock: > 1 pcs.

Plastmasas savilcēji

Plastic ties.
-2,5 x 200 mm
- 100 pcs/set.

Stock: > 1 pcs.

Stand for Hi-Lift

Stock: > 1 pcs.

Clip removal tool kit

Tool set for removing car upholstery fastening clips, 4 pcs.
- Lever with cutouts at both ends: 220x20mm.
- Lever with cutouts at both ends: 185 x 20 mm.
- Lever with both blunt ends: 140x20 mm.
- Spoon lever: 160x22 mm.
- Material: hardened nylon, does not scratch or damage the upholstery.

Stock: > 1 pcs.