Instruments

Ātri noņemams uzgalis

11440
Adapter tip, M1 / 4 quick-detachable.
It is used to connect the pneumatic tool to the compressed air source.
Material - carbon steel.
Packing - blister.

Stock: 0 pcs.

Pneimatiskā pistole

Air blow gun with hose and tee included.
It is used to remove various types of contamination with a jet of compressed air.
The small diameter of the gun tip allows you to remove dirt even from small holes and crevices, which makes the kit a very useful tool in the work of various services or mechanics.
Maximum pressure 13 kg / cm2 (13 atm)
1/4 inch connector
Included:
- pistol
- tee
- hose 5 meters.

Stock: 0 pcs.

Kompresors

AIR COMRESSOR
-250psi
-constant working time 10 minutes.
-constant working time if the pressure is more than 5 bar - 5 minutes.
Pause 10 minutes.
Not intended for pumping wheels of agricultural machinery.
Power supply 12 and 220 volts.

Stock: 0 pcs.

Domkrats hidrauliskis

HYDRAULIC BOTTLE JACK (230-460MM)
Designed for lifting vehicles during repair work.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 32 and 50 t).
Delivered in individual cardboard box.
10000
7500
230
150
80
460

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Teleskopiskā uzgriežņu atslēga

Telescopic wheel wrench TWW-17 / 19mm.
-Variable length: 34-55 cm.
- Non-slip handle.
- Size: 17/19 mm.
- Chromed steel - the vanadium used in the production of keys ensures high quality and durability.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery Charger 42403.

Specifications:
- capacity 20-90Ah,
- charging voltage of 6-12V,
- charging the battery in 3-4 hours,
- LED indicator for monitoring the level of load,
- if the battery is overloaded, the charger will maintain it at a normal current level.
- if a short circuit occurs, the charger will automatically turn off and resume its work after 1-2 minutes.
- High-quality plastic case.

  Only for 6 V and 12 V batteries with lead and acid.
The charger should be powered by an AC voltage source of 220-240V.
  Avoid contact between the positive and negative terminals to prevent a short circuit.
  We recommend storing the rectifier in a dry and well-ventilated area.
- Quality goods.
- Easy to use.

Stock: > 1 pcs.

Kājas pumpis

High Pressure Mini foot pump with pressure gauge PU03
Strong metal hand pump with a maximum pressure of 11 BAR / 160 PSI. Easyly to use, and and thanks to its small size, easy to transport and store.
It has a double universal head for car and bicycle valves. Additionally, an adapter and needle for pumping mattress, balls, inflatable toys etc. are included.
- made of aluminium and durable plastic
- manometer calibrated to 11 BAR / 160 PSI
- a solid base makes it easier to hold the pump with your feet
- a 40 cm long wire
- pump height: 27 cm
- dimentions after folding: 17,5x13x9 cm

Stock: > 1 pcs.

Jack

Max load- 1000 kg
Pick up hight- 100 - 360 mm.
Weight- 2,13 kg.

-Used for lifting vehicles.
-Has rhombic design with jack screw.
-Equipped with a ratchet wrench for ease of use.
-Clamping screw has trapezoidal thread.

Stock: 0 pcs.

Rievots skrūvgriezis

>Intended for professional usage and has improved strength characteristics and extended service life.
>Screwdriver has a standard slotted magnetized working profile.
>Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 >HRC and protected against corrosion by the chromium plating.
>Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
>Two-component impact-resistant handle has rubberized anti-slippage coating.

Stock: > 1 pcs.

Screwdriver

Stock: 0 pcs.

Long nose pliers

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 72 teeth allows to rotate by 5 degree minimum angle
>Equipped with a flag switch, a quick-reset button and a holding ball
>Made by cold stamping method
>Material - chrome-vanadium steel CrV50BV30
>It is hardened to hardness not less than 39HRC
>It is chrome plated and matt finish to resist corrosion

Stock: 0 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Tap wrench L-shaped telescopic (1/2")

>Tap wrench is made by cold stamping method
>Material – chrome-vanadium tool steel
>Equipped with a spring-loaded holding ball
>It is chrome plated and matt finish to resist corrosion
>Has a standard square drive 1/2'
>Wear-resistant, suitable for the long-term usage at max loads
>Equipped with a plastic handle with a rubber anti-slip coating

Stock: 0 pcs.

Regulējāmās plakanknaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers).
>Equipped with comfortable rubber handles which protect the palm from slippage.
>Jaws induction hardened to 55-58 HRC.
>Protected against corrosion by phosphating.

Stock: 0 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Kombinētās knaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers)
>Entirely meet requirements of GOST 5547-93
>Have four working surfaces for fixing flat, round objects, for cutting edges along the plane and side cutting pliers for cutting wires
>Equipped with comfortable ergonomic two-component plastic handles with protective knurling which protects the palm from slippage
>Cutting edges are induction hardened to 55-58 HRC
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.