Compressor
EPAP11 – 3-in-1 Cordless Compressor with Jump Start and Power Bank
The EPAP11 is a multi-functional portable compressor with a built-in battery, jump starter, and power bank. Designed for drivers who need reliable tire inflation, emergency power, and electronics charging – all in one compact device.
With a maximum pressure of 150 PSI and a flow rate of 20 L/min, this compressor is ideal for inflating car, motorcycle, and bicycle tires, air mattresses, and balls. Inflation time from 0 to 2.5 bar is approximately 10–11 minutes. The device offers four preset operating modes: car, motorcycle, bicycle, and ball – making it easy to quickly set the correct pressure without the need for manual programming. The pressure scale ranges from 14.5 to 51 PSI.
The built-in 4x 2000mAh (14.8V) battery allows for wireless operation and charging of mobile devices via the USB port (5V/2.4A). The compressor can also be used as an emergency booster to jump-start a vehicle – the starting current is up to 500A. The set includes smart jumper cables with a full suite of safety features: spark protection, reverse polarity protection, overload protection, and overheating protection.
An additional feature is the built-in 5W LED light, which offers two white brightness levels and a red emergency light with a flashing function – ideal for marking roadside stops or working at night.
Key Features:
Inflates up to 150 PSI / 10 bar (20 l/min)
4 pre-set inflation modes: car, motorcycle, bicycle, ball
Pressure range: 14.5–51 PSI
Emergency vehicle start – starting current up to 500A
USB power bank (5V / 2.4A)
Built-in LED lighting: two brightness levels (white) + red flashing emergency light
Protection: overload, short circuit, overheating, and reverse polarity
Housing made of fire-resistant ABS plastic (V0 class)
Includes:
– Compressor
– 1.6 m inflation hose
– 4 interchangeable nozzles (for mattresses, balls, etc.)
– Smart jumper cables
– USB Type-C power cable
– Cigarette lighter cable (approx. 3 m)
– Fabric carry case
– Instructions
Technical Specifications:
Power Supply: Built-in 14.8V battery (4×2000mAh)
Power: 80W
Operating Current: 10A
Start Current: 500A (max.)
Maximum Pressure: 150PSI (10.3Bar)
Pressure Range: 14.5–51 PSI
Capacity: 20L/min
Inflation Time (0–2.5bar): 10–11 minutes
Inflation Modes: Auto / Moto / Bike / Ball
USB IN: 5V / 2A
USB OUT: 5V / 2.4A
Housing Material: ABS (V0 Class)
LED Light: 5W (white – 2 brightness levels, red – flashing)
Charging Time: 4.5–5 hours
Stock:
0 pcs.
 |
|
|
|
|
Starter Rectifier
Stock:
> 1 pcs.
|
|
|
|
|
Akumulatora lādēšanas
An advanced charging function rectifier EPCBC03 . Powered by 230V AC voltage, it offers an output voltage of 12/24V, providing versatile charging. The rectifier is ideal for charging batteries for cars with START / STOP engines.
Technical data:
Power supply: 230V AC.
Output Voltage: 12/24V.
Output Current: Max 15A.
Maximum load power: 130W.
Power without load: 3.2W.
Cooling System: Fan.
Dimensions: 17.5x13.5x7.5cm.
Voltage identification for 12V: 8V - 14.5V.
Voltage identification for 24V: 18V - 29V.
Output cable length: 120 cm.
Input cable length: 140 cm.
8 STAGES OF CHARGING:
Phase 1: Battery Assessment - Examining the battery's charge state and verifying the correctness of the connections to the rectifier.
Phase 2: Desulfation - Identifying a battery with sulfate deposits. Low-voltage, high-current pulsating charging allows for the removal of sulfate from electrodes, restoring the original battery capacity.
Phase 3: State Check - Checking whether the battery is not damaged and whether it is capable of accepting a charging current. This prevents charging a damaged battery.
Phase 4: Soft Start - Begins charging an undamaged battery with low current (about 15%), gradually increasing its value.
Phase 5: Main Charging - Charging the battery with maximum constant current, automatically adjusted depending on the charge state, until 80% capacity is reached.
Phase 6: Final Charging - Charging with decreasing current and constant voltage until the battery is fully charged (100%).
Phase 7: Charging Test - About a two-minute test to check if the battery charge level is maintained after charging has ended. If so, the charging process is completed.
Phase 8: Voltage Maintenance - Monitoring the battery voltage and maintaining an optimal charge at the 95-100% capacity level using current pulses.
Stock:
> 1 pcs.
 |
|
|
|
|
Akumulatora lādēšanas ierīce ar Powerbank
02524- Charger with Powerbank 12V 4Ah 800A SJ02, portable.
The modern charger is a small and highly functional battery-powered car starter with powerbank function, a safe equipment for every auto repair shop, home garage and car.
It offers a wide range of features:
- Starting all petrol and diesel engines.
- Battery charge level indicator.
- LED display.
- Built-in flashlight.
- Electronic device charging function - allows you to charge the batteries of a smartphone, laptop, camera, tablet or other electronic device.
- External battery.
- Battery capacity up to 4000 mAh.
- Durable housing.
Stock:
> 1 pcs.
|
|
|
|
|
Akumulatora lādēšanas ierīce
Compact and powerful lithium starter OSRAM BATTERYstart 300 with external battery function for small and medium-sized vehicles with a voltage of 12 V (petrol engines 6 l and diesel engines 3 l).
The starter is equipped with a bright LED flashlight.
This jump starter features a power bank feature with two 2.1A USB ports to charge your electronic devices on the go - just plug in the USB charger and the battery starts working.
Technical description:
- Voltage: 12 V.
- Starting current: 300A (max. 1500A)
- Battery: LiCo2 13000 mAh.
- Charging: micro USB 3 hours.
- Operating temperature: -20°С…+40°С
- Dimensions: 168.00 x 88.00 x 33.00 mm.
- Weight: 490 g.
Stock:
0 pcs.
|
|
|
|
|
Akumulātora lādēšanas ierīce
Battery Charger for all types of batteries (lead-acid SLA, AGM, GEL).
- Charging voltage 12V/24V.
- Fully automatic charging process.
- Charging current: 12A - recommended for battery, capacity from 8Ah to 180Ah.
- Displays battery percentage and current battery voltage.
- Automatically carries out the regeneration process when a deeply discharged battery is detected.
- Displays the current charging capacity of the generator as a percentage.
- Start assist function 75A - petrol up to 3000 cm3, diesel up to 2000 cm3.
- Durable clips and metal housing.
- Reverse connection and short circuit protection.
- Overload protection 80A.
- LED display provides convenient operation with an overview of the charging status.
- cables 6mm2: 150cm.
- power cable: 190cm.
Stock:
> 1 pcs.
|
|
|
|
|
Daudzfunkcināla palaišanas ierīce
Multifunction starter.
This device is an indispensable assistant in every auto repair shop, home garage, as well as in the car - it has a wide range of functionality.
The device is equipped with:
- Jump Starter with 17Ah battery and 900A current for starting cars, light trucks, ATVs, boats, gardening equipment and other 12V appliances.
- air compressor with pressure gauge.
- a powerful flashlight.
- Features a 12V DC cigarette lighter socket and a 5V USB power socket that can be used to power accessories or charge electronic devices such as mobile phones and MP3 players.
Three LEDs show the battery status - the battery level when the device is charging and when it is fully charged. It also has an audible alarm and a connection status LED that lights up if the device is not connected properly.
Light weight combined with an ergonomic handle makes it easy to transport and use the device anywhere.
Stock:
> 1 pcs.
|
|
|
|
|
Akumulātora lādēšanas ierīce
Battery Charger 42403.
Specifications:
- capacity 20-90Ah,
- charging voltage of 6-12V,
- charging the battery in 3-4 hours,
- LED indicator for monitoring the level of load,
- if the battery is overloaded, the charger will maintain it at a normal current level.
- if a short circuit occurs, the charger will automatically turn off and resume its work after 1-2 minutes.
- High-quality plastic case.
Only for 6 V and 12 V batteries with lead and acid.
The charger should be powered by an AC voltage source of 220-240V.
Avoid contact between the positive and negative terminals to prevent a short circuit.
We recommend storing the rectifier in a dry and well-ventilated area.
- Quality goods.
- Easy to use.
Stock:
> 1 pcs.
|
|
|
|
|
Akumulātora lādēšanas ierīce
The DBC-4A rectifier can be used to charge lead-acid (conventional and MF), Ca / Ca, AGM and gel batteries. This is a microprocessor rectifier made in accordance with the IP65 standard, which means resistance to dust and splashes, as well as splashing with a low-pressure water jet. Has guarantees from:
-short circuit.
- reverse battery connection (reverse polarity).
-open circuit.
-protection.
- recharge the battery.
- overload rectifier.
Rectifier overheating.
Has 6 charging modes:
Batteries 6 V to 14 Ah
7.2 V to 2 A
7.4 V to 2 A (charging at low temperatures)
12 V to 14 Ah batteries and deeply discharged
14.3 V to 2 A
14.7 V to 2 A (charging at low temperatures)
12V battery above 14Ah
14.3 V to 4 A
14.7 V to 4 A (charging at low temperatures)
It shows the battery voltage and charge level on an ongoing basis and adjusts the charging current depending on its needs. After charging, FULL is displayed and the battery voltage is maintained.
Specifications:
Supply voltage 230V 50 Hz
Output voltage: 6 / 12V
Power Consumption: About 60 W (Standby 1 W)
Charging voltage:
7.4 V (for 6 V batteries)
14.7 V (for 12 V batteries)
Charging Current:
2A +/- 10%,
4A +/- 10%
Supported Battery Capacity:
6V - 1.2Ah to 14Ah
12V - 1.2Ah to 14Ah and 14Ah to 120Ah
Degree of protection: IP65
6 charging programs switched by the “OPERATION MODE” button
Has a backlight display.
Gel batteries with a capacity of up to 14 Ah, used in motorcycles and scooters, must be charged by selecting the program with the motorcycle icon on the display.
Charging with a higher current may damage the battery.
Stock:
> 1 pcs.
 |
|
|
|
|
Akumulātora lādēšanas ierīce
Charger with microprocessor 4A IP65 TUV / GS.
Ideal for lead-acid, gel and AGM batteries.
Use - cars, ATVs, boats, mowers, scooters, motorcycles, snowmobiles and jet skis.
Microprocessor control, nine-step intelligent charging characteristics.
Stable charging function.
Diagnose and charge heavily discharged batteries.
Insulated terminals.
Battery capacity 1.2 Ah - 120 Ah
Input parameters: 220-240 VAC 50 Hz
Output parameters: 6V 2A / 12 V 2 / 4A
Battery Capacity: 1.2 Ah - 120 Ah
Stock:
> 1 pcs.
|
|
|
|
|
Akumulātora lādēšanas ierīce
Battery charger EST-302 is designed for automatic charging of lead-acid batteries with a voltage of 6 V or 12 V and a capacity of 34 ÷ 60 Ah.
- 230 V AC power supply
- Rated power consumption 70 W
- Output voltage 6 V 12 V
- peak charging current 6A
- Rated charging current 4.5 A
- Capacity of rechargeable batteries 34 ÷ 60Ah
- Protection against transformer overheating using a thermal switch
- Protection against short circuit with fuse
- Plastic case
- Dimensions in mm: 180 x 150 x 100
- Weight in kg: 1.50
Stock:
> 1 pcs.
|
|
|
|
|
