Instruments

Tire tread height gauge

Convenient tire tread height gauge, an essential tool for assessing tire wear. Useful in any car workshop or tire vulcanization point. The large and easy-to-read scale with a 0.1 mm scale allows you to measure the tread height on a scale from 0 to 11 mm. It does not require a power source, which increases ease of use.

Product features:

Convenient tread height gauge.
It is characterized by accurate measurement (0.1 mm gradation).
Very easy to use.
Extremely handy (fits in a trouser pocket).
No power required.
Large and legible dial that shows the result.
Specification:

Material: Plastic
Measuring range: 0 - 11.0 mm
Accuracy: 0.1 mm
Units of measurement: mm
Easy to read dial
No batteries required!
Overall dimensions: 61 mm x 47 mm x 17 mm
Weight: 90 g
Color: as shown in the picture
Packaging: blister

Stock: > 1 pcs.

Riepu protektora mērītājs

Digital tread depth gauge.
It is an essential tool for measuring tire wear, useful in every auto repair shop, tire curing station and in every car. It can be used not only to measure tire tread, but also for other car or motorcycle related measurements. Most importantly, the measurement scale is from 0.0 to 25.4mm, making it a versatile measuring tool.
Product Features:
- Precise measurement.
- Simple controls.
- Very handy (fits in your pants pocket) and easy to use.
- Quick switch between metric and inch measurements.
- Low power consumption, which allows the battery to work for a very long time.
- Large and legible display showing the result.
Specification:
- Material: plastic.
- Power supply: SR44/LR44 1.5V battery.
- Measuring range: 00-25.4 mm.
- Accuracy: 0.01 mm.
- Units: inches/mm.
- Dimensions: 60mm x 113mm x 13mm.
- Weight: 90 g.

Stock: > 1 pcs.

Riepu protektora mērītājs

Tyre tread gauge, code AG235B.
Convenient tread depth gauge is an indispensable tool for assessing tyre wear. It will come in handy in any car service or tyre fitting shop.
Large and clear indicator with easy-to-read letters and division value of 1 mm allows you to measure the tread height on a scale from 0 to 20 mm.
Does not require a power source, which increases ease of use.

Stock: > 1 pcs.

Riepu pumpēšanas pistole

PRESSURE GAUGE 10 ATM WITH HOSE
Membrane-type pressure gage with scale in psi and bar.
It is used to display and test the pressure of non-aggressive and not crystallising fluids (liquids, gases).
It can be used for tire pressure monitoring.
It is protected against mechanic damage with rubber cover.
The range of measured pressure from 0.05 to 12 MPa.
Accuracy class — 5,0.
Body diametr — 65 mm.

Stock: 0 pcs.

Repair kit foam

Stock: > 1 pcs.

riepu spiediena mērītājs

Tyre pressure gauge metal 7,5bar

Stock: > 1 pcs.

Riepu spiediena mērītājs

Digital tire pressure and inflation gauge.
- Electronic.
- LCD display.
- Pressure /psi/: up to 100
- Pressure /bar/: 0-7

Stock: > 1 pcs.

Rievots skrūvgriezis

>Intended for professional usage and has improved strength characteristics and extended service life.
>Screwdriver has a standard slotted magnetized working profile.
>Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 >HRC and protected against corrosion by the chromium plating.
>Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
>Two-component impact-resistant handle has rubberized anti-slippage coating.

Stock: > 1 pcs.

Riteņa atslēga

Wheel nut wrench 19мм

Stock: > 1 pcs.

Riteņa atslēga

Wheel nut wrench
TWW-17/19mm 21/23mm

Stock: > 1 pcs.

Riteņa atslēga

Wheel nut wrench 19мм

Stock: > 1 pcs.

Riteņa atslēga

Wheel nut wrench 21mm

Stock: > 1 pcs.

Riteņa atslēga

Telescopic wheel wrench 17/19/21/23 mm.
Fits the most common wheel nut sizes 17/19mm and 21/23mm. The telescopic wheel wrench has a standard length of 340 mm and can be extended to 535 mm.
The key has a soft plastic handle for a comfortable grip.

Stock: > 1 pcs.

Rokas pumpis

Hand pump

Stock: 0 pcs.

Sānu griešanas knaibles

Side cutting pliers 58749. Precise work and quality materials ensure a long service life of the pliers. The blades are designed to cut soft and hard wire. The thin head allows you to work in hard-to-reach places. The handle is made of materials that increase comfort. Length 160 mm.

Stock: > 1 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Sastiprināšanas bļoda metāla magnēta

Stock: 0 pcs.

Satvērējs

Pick-up tool, 60 cm.
Pick-up tool(the so-called claw) - designed to lift elements from hard-to-reach places, for example, from sewer pipes, behind cabinets, from the engine compartment.
Indispensable in auto repair shops and home garages.
After the spring is compressed, the claws expand to the end of the grip, thanks to which we can pull out objects.
Length: 60 cm.

Stock: > 1 pcs.