Instruments

Teleskopiskā uzgriežņu atslēga

Telescopic wheel wrench.
- 2 interchangeable tips: 17-19mm and 21-23mm.
- Made from durable steel.
- Telescopic non-slip handle for easy handling.
- The handle can be extended up to 510 mm.

Stock: > 1 pcs.

Teleskopisks magnets

Telescopic gripper with magnetic tip is a tool for lifting and holding metal objects. Useful during assembly work in hard-to-reach places, lifting objects, etc. Adjustable gripper length.
Technical specifications:
Adjustable length: 13-62cm
Total length when extended: 62cm
Magnet diameter: 13mm

Stock: > 1 pcs.

Voltmeter

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor s

Stock: > 1 pcs.

Voltmeter

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams f

Stock: > 1 pcs.

Voltmeter

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: > 1 pcs.

Testeris

Carpoint 0623408 Vehicle Current Tester 3 - 48V

Stock: > 1 pcs.

Testeris

Voltmeter 6-24V

Stock: 0 pcs.

Testeris

DC and AC voltage tester with LCD display, 12-250 V.
It is used to measure alternating voltage in the range of 12-250V with a frequency of 50-500Hz, to check the integrity of the cable and grounding.
Suitable for both professional electricians and occasional home use. The check is carried out by contact or induction method, i.e. when the tester approaches the installation being tested.
Specifications:
- LCD-screen displaying the results of measurements in the ranges up to 12, 24, 36, 55, 110 and 220 V.
- Additional LED signaling.
- Flat tip 2.9 mm wide - provides precise access to small elements.
- Power supply: 3 x LR41 (included)

Stock: > 1 pcs.

Testeris

Voltage detection tester, 6-24V.
The device is designed to determine the voltage in the electrical installations of vehicles with a voltage of 6/24V.
Inside the transparent handle is a light that lights up when voltage is detected.
The included alligator clip cable simplifies vehicle wiring troubleshooting and is used to quickly detect power failures in electrical systems, fuses, or lighting.
Technical data:
- Operating range: 6V-24V.
- retractable cord with crocodile clip.
- Material: plastic.
- Length: 120 mm.
Weight: 55g

Stock: > 1 pcs.

Testeris

Ignition system tester.
The device allows you to easily diagnose damage to the ignition coil and check the quality and strength of the spark plug.
The tester is connected between the high voltage cable and the spark plug.
Usage:
- With the engine off, remove the spark plug from the spark plug,
- Connect the tip of the tester to the spark plug,
- insert the metal tip of the tester into the ignition tube,
- start the engine.

Stock: > 1 pcs.

Testeris piekabei

Trailer connection tester.
Check the electrical installation in the vehicle's 7-pin socket and trailer, connecting the tester between the car and the trailer.

The tester is simply connected to the plug / socket and by pressing the yellow button the device performs an electrical installation test. If all the LEDs in the device light up, it means that the installation is operational. A non-illuminating diode means that the cable is damaged.
Powered by a 9 V battery (not included).

Stock: 0 pcs.

Transport platform trolley

Stock: > 1 pcs.

Transport roller set

Stock: > 1 pcs.

Water pH meter

Stock: > 1 pcs.

Universāla uzgriežņu atslēga

Multifunctional universal rotary key.
Product Features:
- Distance range from 8 to 19 mm - allows you to install all types of bolts and nuts.
- Specially designed wrench sockets automatically adjust to the size of the bolt or nut within the above range.
- Works at 45°, 60° and 90° angles (angle adjustable by screw).
- Two 360° rotatable heads, each with 4 holes - allows you to quickly switch between ranges.
- Triple toothing - allows you to insert and remove even damaged bolts and screws.
- Comfortable rubberized handle - increases grip and prevents fatigue and slipping of the hand.
- Material: metal and plastic.
- Key length: 25 cm.
- Key width: 5cm
- Distance: 8mm, 10mm, 11mm, 13mm, 14mm, 16mm, 17mm, 19mm.

Stock: > 1 pcs.

Universal tester

TMP02-G7G13
Universal tester TMP02-G7G13 allows to verify properlies operation of installed towbar kits (any producer). Device checks all signal's circuits for lighting lamps of trailer. Can be used with installations equipped with socket G13 or G7 (using adapter). Additionally is measured voltage on 'powered' pins.



Highlights of TMP02-G7G13:

device has build-in circuits of equivalent load what allows to verify operation 'under load',
very long (up to 5 meters) wire (from socket to the console) what makes possible to be inside car's cabin with console of tester in hand and to check all circuits/lights simple and fast,
is possible to simulate malfunction of bulbs for each directions lights and stop lights - like also completely disconnect all circuits,
is presented value of voltage for full G13 installation - and is signalled to switch on powering to the pins 9 and 10 ('permanent' and 'for charging').

Stock: 0 pcs.

Drill SDS PLUS

Stock: > 1 pcs.

Urbju komplekts metālam

gold-black metal drills 1.0-13.0mm made of 4341 HSS high-speed steel, TiN coated (titanium nitride). Drills compliant with DIN 338. Cylindrical handle.
Drills designed for making through and blind holes. They have two central blades ground at an angle of 135° and grooves that effectively remove chips up the hole.
Drills coated with a TiN layer are designed especially for machining difficult-to-cut materials. The use of a TiN coating results in an increase in the hardness of the drills, allows for the acceleration of the cutting process and allows for better quality of the processed elements. The titanium nitride layer reduces the wear of the blade by reducing the friction force, and therefore extends the life of the drills.
Drills packed in a convenient plastic box for storage.
Product characteristics:
drills made of HHS 4341 high-speed steel
TiN (titanium nitride) coating
very good waste removal thanks to the ground spiral
2-step tip ground at an angle of 135°
perfectly ground cutting edge
Technical specifications:
Steel: HSS 4341
Coating: TiN
Size: 1.00 / 1.50 / 2.00 / 2.50 / 3.00 / 3.50 / 4.00 / 4.50 / 5.00 / 5.50 / 6.00 / 6.50 / 7.00 / 7.50 / 8.00 / 8.50 / 9.00 / 9.50 / 10.00 / 10.50 / 11.00 / 11.50 / 12.00 / 12.50 / 13.00 mm
Top: 2-step, ground at 135°

Stock: > 1 pcs.

Socket set

Stock: > 1 pcs.

Uzgriežņu atslēga

8 in 1 multi-size wrench, equipped with rotating heads with sockets in various sizes. This tool is perfect for a variety of repair and maintenance work.

The ratchet head made of chrome-vanadium steel (CR-V) ensures strength, precision and reliability in many applications.

Dimensions: 255 mm x 45 mm
Socket sizes: 8,10, 12, 13, 14, 17, 19, 21 mm

Stock: > 1 pcs.